Imperial Berkey w/ 2 BB''s Save 17% Off

My wife and I drink more water now. It even tastes better--or rather, you can notice the lack of metals and chemicals. We are super happy that we got this and we recommend this to everyone.

My only quibble with it is that because of the positioning of the spout (it''s not at the very bottom), not all of the filtered water can pour through the spout. So there is always some water left over. However, this just gets mixed in with the filtered water eventually.

It took about 2 days for setup and priming. There is just 2 of us using this, and we have to refill it every other day. It works out perfect.

HINT: we bought a little rolling stand/cart which it sits on top. When we need to fill it, we just roll it over to the sink. Our facet has a pullout spray nozzle which can extend and reach the Berkey. Super easy to fill and no mess.

I have been researching Big Berkey water systems for some time before I decided to make the purchase since it was so pricey but the bottle water investment was getting ridiculous. I refused to drink tap water since finding out what is actually in our water supply (arsenic,sodium flouride,heavy metals, pharmaceuticals, uranium, etc.)you can look it up in your home town and see the levels of it through the EPA website.

The Big Berkey is just amazing not only does it purify amazingly but the taste beats any bottled water you can buy and im very picky with bottled water. Its so satisfying to know that know matter how compromised my tap water becomes I will always have the cleanest best tasting water anywhere.I urge everyone to do your own research and you will see for yourself how amazing this product is, the Red Cross and the World Health organization use Big Berkeys. Make sure you get the one with 2 flouride filters and do a google search on sodium flouride you will see it causes cancer, bone disease, nerve damage and a host of other dangerous side effects. Flouride is the main reason i got this unit since it is added to the water supply statewide and no I do not work for Big Berkey im just excited that im not paying $80 a month for water that isn''t even as good as this!

Buy Imperial Berkey w/ 2 BB''s Now

I purchased this unit about 2 months ago. We have been using it every day and it has been great! The first batch or 2 had a bit of a chalky taste but that may have been our error (not priming it well enough or not filling it properly). Since then I always fill it to the top and it has tasted wonderful! We even did the food coloring test and the water came out clear, as promised.

Other than filling it up to the top the only advice I would give is to wait until it just drips out before re-filling. You can''t see how much water is left, so if you fill it to the top and the bottom chamber still has a lot of water in it, it can overflow. Though, the overflowing really was just a small puddle from it dripping on my counter, so you won''t get a sudden flood. Oh, and you do have to put it at the edge of a counter, otherwise your cup won''t fit under the spout.

I love that I don''t have to worry about plastic, recalled water, bacteria or the environmental impact of the plastic bottles or the process in which the water is collected :) And it tastes wonderful! I recommend it to everyone I know.

Read Best Reviews of Imperial Berkey w/ 2 BB''s Here

I ordered the Big Berkey system and received the British Berkefeld. After calling the shipper, I was assured that the units were virtually identical and that the situation in Haiti had impacted the available units. Since I live in an area where the water is fluoridated, my goal was to rectify the situation. I''ve read enough about fluoride to know it is quite harmful and it is not necessary for the human body. Relative to the use of the unit itself, I have been extremely pleased with the quality of the water and I recommend it for anyone who desires safe, clean-tasting water.Berkey Light Water Filter With 2 Black Filters & 2 Free PF-2 Fluoride Filters

Want Imperial Berkey w/ 2 BB''s Discount?

I actually don''t have the model that is this big, Ihave a smaller one , but the filter elements are the same which is the best part about this. Do your own research and find out that the purification is excellent in these filters. I also have the plastic model, which i like because i can see through it and the base gives it the height to put cups,pans etc. under it , where the stainless does not have that so i found a item that fits underneath. I did not buy the "clear glass tube" so you can see the water level as it is extra cost, and i admit that I have had water over flow onto my counter and floor. Now i am more aware and give it a check. I really love the ''taste" of the water by using these. i live off of city water, so I dont deal with flouride and such, but i do deal e-coli and other natural stream, river ,creek contaminants. No one has ever gotten sick from water and I have used these for more than six years. I think it''s a great investment and will save you from buying bottled water over and over. Be careful when cleaning the filters (dont drop in sink, DONT use bleach) clean with scrubber type sponge (not metal)...anyway, I''m switching to the stainless as i am making a commitment to have less plastic in our family. Hope this helps.

Save 17% Off

Read More >>

Avanti Thermo Electronic Cold and Room Temperature Water Dispenser Save 14% Off

• Ideal for use in small offices, homes, waiting rooms, and more
• Convenient and lightweight countertop design
• Holds three- and five-gallon bottles
• Serves cold and room-temerature water
• Available in white

This water dispenser has a very nice concept. I liked that it uses any type of refillable bottle. Unfortunately for me after having it a month it never shut off and no longer cooled the water.

I contacted Avanti since it is under warranty and was told to ship it back and they would send me out a new one. Only problem was that I had to cover the shipping over and back and if I wanted to make sure it actually got there, needed to also pay for insurance and tracking. This would have cost me nearly as much as the unit itself and after reading many reviews with negative outcomes even after replacement I didn''t feel it was worth the cost. I guess I''ll just continue to look for one that actually will work.

Buy Avanti Thermo Electronic Cold and Room Temperature Water Dispenser Now

1st of all: do NOT believe the instruction booklet when it says not to wash out the unit before use! (They claim it comes ready for use from the factory.) It gave a really "off" flavor to the water till I rinsed out the unit thoroughly with baking soda dissolved in water. DO believe the people who say it takes a long time for water to get cold--it really does, especially the first time you use it. That said, we really like this unit now. It fits nicely on the counter, is easy to use, and provides our family of two with enough cold water.

Read Best Reviews of Avanti Thermo Electronic Cold and Room Temperature Water Dispenser Here

Been using this for 3 months now and have no leaking or any problems yet. The best way to get rid of the plastic taste is to boil water and pour it into the tank and flush it out through the spout. After I did a gallon of hot water, the taste went away. The tank is small so after you dispense 2 cups of cold water, the fan comes on. I''m sure in the summer you will run out of cold water quickly if you have several people using it. But if you like to drink your water in room temperature, this is great to have on your counter. Note that i had a dispenser from Poland Spring (more expensive one) and the water tank was aluminum. This water cooler has a plastic tank.

Want Avanti Thermo Electronic Cold and Room Temperature Water Dispenser Discount?

Myself and a co-worker both purchased this unit from Amazon for infrequent usage. Both units leaked within 2 months, and 1 unit failed to cool the water after 2 weeks. Avanti would not honor the product''s warranty because it was not purchased from them. I know its a low cost and everything, but spilling liters of water all over your desk and laser printer is not really worth the price in hindsight.

Save 14% Off

I purchased this water cooler a year ago and found the water temperature to be not very cold. Only cool but not ice cold, but it was better than tap water.It also made a loud noise when operating and would often do weird things that make it seem as if it is faulty. It would after a long time resume and again give cool water but never ice cold.Almost to the day, one year after purchase it died.I should have known. The reviews showed this up very clearly but I did not heed the warnings.Hope you know what you are doing when you purchase this piece of junk.

Read More >>

Watts 5-PK-4SV Premier 1-Year 4-Stage Reverse Osmosis Replacement Filter Kit

• Complete 1-Year Supply
• Carbon Block Technology

I had purchased a used R/O unit. After Disinfecting it and installing the new filters and a membrane we have had great water for the past 6 months

Buy Watts 5-PK-4SV Premier 1-Year 4-Stage Reverse Osmosis Replacement Filter Kit Now

This is an excellent replacement filter pack for your Watts R-O system. Watts filters are very high quality and do a very good job producing clean, good water for any residence. Highly recommended.

Read Best Reviews of Watts 5-PK-4SV Premier 1-Year 4-Stage Reverse Osmosis Replacement Filter Kit Here

Though these filters work, they are NOT Watts Premier. Quality is noticeably less. The final stage carbon filter does NOT come with new connections, you must reuse the old ones off your previous filter, or buy new ones. Watts Premier supplies new connections with their filter kits. This kit is reasonably priced and the filters fit fine, but buyer beware you are NOT getting what is advertised.

Want Watts 5-PK-4SV Premier 1-Year 4-Stage Reverse Osmosis Replacement Filter Kit Discount?

So far so good no leaks,Installed 2 months ago, waiting to see if it holds up for a year. If all goes well would buy again.

PRO 10 inch filters designed around STANDARD 10 inch tall filter holders not for customs

PRO each sub filter in the pack is individually wrapped to keep them clean good idea

PRO while the spun 5 and 1 micron filters make a seal by compression in the chamber, the carbon block filter has a rubber seal on top and bottom to ensure water must go through it.

comment filters always filter from OUT to IN dirty water comes in the outside of the filter then travels through it to a hollow core and exits the top and is piped to the next filter holder''s outside surface. Again it goes outside to inside. This is the standard.

TIP when purchasing new RO systems, look for standard 10" filter systems and changes

will be cheap and easy because there are 2 standards 10" and commercial 20" filters.

AVOID custom 1/4 turn or custom steel filters you can buy systems with clear or opaque filter chambers clear chambers have pros and cons you can see the contamination, but they let light in which promotes algee growth.

A typical RO system has 3 prefilters First a 5 micron sediment, then carbon block, then 1 micron in that order before the water even gets to the RO membrane (I use a waste water pressure booster to double my pressure going to the membrane by using twice the volume of wastewater, which RO aways has plenty of to boost input pressure by 2x to 80psi. I get 40 psi from the city water, and my tank goes to 80 psi.

Keeping your RO membrane clean is imperitive to the proper function of the total unit giving clean, potable water with almost no total dissolved solids (they get flushed out the wastewater) and also gives sterile water w/ UV sterilizer in series (replace bulb yearly) and a standard refrigerator taste filter on the output line to drink for good tasting water. I measure 3ppm TDS on my output. Distilled water is 1.0 ppm for battery maintenance. That is very low dissolved solids from 500 ppm at the street!

On my system I T''ed off the 14 gallon oversized storage tank and ran that water, which avoids the UV lamp and the refrigerator filter, to a 25 foot long piece of tubing that terminates in female hose fitting (backwards i know you want male hose fitting but I fixed it with a shutoff valve that was male-male) so on the end I paid 8 bucks for 3 pvc fittings including a ball valve I go hose to 3/4 pipe thread, rinto the 1/4 turn ball valve, then back to 3/4 pipe fitting to male hose thread. All pipe fittings are teflon taped and the hose fittings have washers for zero leaks. There is also a 1/4 turn 1/4" tube shutoff valve on the T off fitting which allows me to fill the dog water dish (1 gallon) or connect a hose to my pressure washer and wash the car with 10 gal and no residue, no spots afterwards very nice to have! When I''m done I close the 1/4 turn valve at the tank (14 gallon extra large tank from amazon Reverse Osmosis Storage Tank 14 Gallon White

This use (me, my dog, my car) keeps my RO flushing quite a bit per day and that is good because the membrane is kept clean by flushing. But it also means my prefilters need to be changed on a strict 6 month schedule since they filter 6 times the amount of RO water you get. The last filter is the same as refrigerator filter. In fact my fridge filter just counts 6 months then turns purple (blue+red means time to order filters) at 5 mo. and turns off the blue for red only at 6 mo time to change filter now! (when you press the reset button the 6 mo cycle starts over don''t do it unless you really changed the filter because after 6mo bacteria begins to grow on the filter media and water taste is bad)

Just FYI I live in a VERY hard water area with no chlorine from a well and pump at the end of the street low pressure, high content of dissolved solids, hard (12.2 grains/gallon) water is what I get from the city. I use a whirlpool salt ion exchange water softener to help cut down the solids but it only EXCHANGES the calcium and magnesium for Sodium does not make spots as bad, but its still in the water. See my review of bubble bandit case quantity Carton of Bubble Bandit Dishwasher Detergent with Phosphate. Cleans your dishes the way they use to be. Five 60 oz Bags (19 lbs)FREE PRIORITY SHIPPING AT CHECKOUT! it adds 8.7 percent phosphate to your detergent load to aid cleaning with hard water environments. Use less if you have a water softener about 1/3 normal and less soap.

Read More >>

GE FXHSC Household Pre-Filtration Sediment Filter Save 10% Off

• The GE SmartWater FXHSC water filter has a pleated paper construction
• GE FXHSC heavy duty water filters reduce sand, sediment and rust
• The GE FXHSC filter cartridge is resistant to chemicals and corrosion
• The GE SmartWater FXHSC is designed for purity, bacteria resistance, and chemical resistance
• Replace the GE FXHSC heavy duty sediment water filter cartridge every 3 months or when flow rate is significantly decreased

You can also save some money by using Culligan R50-BBSA cartridge filter, it,s an exact replacement only its 50 microns instead of 30 on the G.E filter, it may last a little longer.

Buy GE FXHSC Household Pre-Filtration Sediment Filter Now

The FXHSC is a great filter, with a very low pressure drop compared to the FXHTC filter. Our system filters lake water (Lake Champlain) & uses the FXHSC filter in combination with 2 other filters & a UV light. It picks up a fair amount of sediment but the water pressure stays fairly constant over the life of the filter, which is great. No complaints & the price is right.

Read Best Reviews of GE FXHSC Household Pre-Filtration Sediment Filter Here

I use this as an entry point filter for my well water. It works well but lasts only 2 months before the water pressure drops noticeably. This is probably not a fault of the filter but because of the amount of sediment in my well water. I tried going with a 50 micron filter (Culligan sells one which is the same size), but I started getting fine sediment in the taps with that one. Note that the holes in a 50 micron filter are 2.5 times as large as the holes in a 30 micron filter. Other than the fact that the 50 micron filter was not filtering well, it did last much longer than the GE filter. So, I am back to the GE filter and pretty much resigned to changing the filter every 2 months.

Want GE FXHSC Household Pre-Filtration Sediment Filter Discount?

There is really not to much to say about a replacement water filter other than I have been using this filter model for several years and they have not failed me yet. They simply work to complete satisfaction; hence, I cannot give less than 5 stars.

Save 10% Off

This product saves us, we live in CA and are on a shallow well. These filters work well for us.

Read More >>

BISSELL 14005 Little Green Compact Carpet Cleaner

Bissell 14005 Little Green verses Hoover F5411 Steamvac Jr.

I''ve used both of these mini shampooers and was not entirely satisfied with either, but I preferred the Bissell''s Little Green over Hoover''s Steamvac Jr. and here''s why:

I first had the Little Green for about five years. It was a great little vac with only minor problems. The fill and empty containers are removable from the unit for convenient filling and emptying. There is a cord winder built onto the unit, the hose wraps conveniently around the unit and locks into place, and the shape and size are convenient for most applications including stairs and storage.

The problems I had with the Little Green:

It would occasionally leak a bit. The water seemed to be coming from where the hose connects to the base. It was a small drip leak that was easily solved by emptying the clean water tank after each use. We used ours so frequently that I sometimes left clean water in the tank during storage to avoid wasting cleaning solution.

My biggest problem with the Little Green was the inability to completely clean the dirty water tank. I had four cats when I first bought the Little Green and eventually had four kids. The Little Green made it through a number of illnesses with us above and beyond pet accidents. The dirty water tank became filthy and unsanitary and was not designed to be dismantled for thorough cleaning. Eventually, the smell became too great and I had to dispose of the tank. I decided it was time to try a new spot shampooer one that had a cleanable tank.

That''s when I decided to try the Hoover Steamvac Jr. Both the Little Green and the Hoover spray and suck reasonably well for a small machine. As far as actual cleaning quality, the two are comparable. However, I found the Hoover to be bulky and a pain and its only redeeming quality, in my opinion, was that I am able to thoroughly clean the dirty water tank.

The problems I had with the Hoover F5411 Steamvac Jr.:

The tanks are the base of the unit and are not removable. In order to fill the clean water tank, you have to either maneuver the entire unit under the faucet and aim at a one inch hole in the portion of the unit that houses the motor, or you have to dismantle the machine and still maneuver the largest part of it under your faucet or use a bucket.

The tanks are a single bucket-style unit separated by a divider. They are not individual parts. When you dump the dirty water, if you have the unit fully assembled, the clean water will slosh around. If you dismantle the machine to empty it, you will also be emptying the clean water tank.

The top portion that houses the motor also has a filter that sits down in the dirty water tank, so if you dismantle the machine to fill or empty it, you are forced to place the motor housing with hose and cord in a tub or sink or get your floor dirty and wet.

The machine is round. It doesn''t fit well on stairs nor is it a convenient shape to store.

There is no cord storage on this unit and no convenient way to store the cord or keep it out of your way when you are filling, emptying, or storing. You can wrap it around the base of the handle, but it usually does not stay in place if you empty the tank and tends to get in the way of using the handle to carry the machine.

The Steamvac Jr. does have a spot to store the hose, but I find it an inconvenient and cumbersome position.

I''m currently saving my pennies to buy another Little Green. The little Hoover just makes me more angry than satisfied and I''ve taken to simply letting stains set in instead of hassle with the obnoxious machine.

I would recommend avoiding the Proheat Little Green. It seems the parts are not designed to work well with the heat and tend to break down. Hot tap water in the standard Little Green works well and this is coming from a germaphobe whose hands are raw from overwashing. If it''s clean enough for me, it''s probably more than clean enough for you. If you''re looking for a spot shampooer, the Little Green is your best bet.

I''ve owned a cleaning business for 26 years, and this machine is great. There are a few secrets to success with it:

To clean it and keep it from smelling, flush it after using. Suck hot clean water through the hose. If your unit is really dirty, suck a mild bleach solution and let it sit. ALSO, remove the rubber gasket at the bottom of the waste tank and clean it... this can be a major source of odor. It''s very easy to do, but not mentioned in the instructions.

Use just clean water in the solution tank, and put the cleaner in a spray bottle. (The less soap the better. Use the scrubber on the nozzle and allow a few minutes of dwell time). Think of your machine as the rinse cycle in a clothes washing machine. Rinse the dirt and soap out, leaving a minumum of residue. A seperate bottle also allows more precise application of cleaner. And it extends tank refills, so you won''t have to wait for the spray pump to reprime as much.

Durablility? I''ve used mine several times a week for almost a year now, what with business, dogs, and small children. No sign of wear whatever.

This is a brilliant design. Don''t let the reviews that don''t know how to work with it dissuade you. It is one of the finest, best engineered consumer appliances ever made. Get the least expensive model, as the Turbo Brush and heater don''t work well and are not needed.

Drawbacks? Okay, it doesn''t have the suction power of a commercial machine. If you want that, pay three hundred dollars more and lug an extra thirty pounds around the house.

Buy BISSELL 14005 Little Green Compact Carpet Cleaner Now

I bought the Little Green the day after we adopted a puppy. Although it does a sufficient job suctioning accidents out of carpeting, I would not recommend it.

Positives:

--Good at absorbing spills or other liquids from carpeting

--Compact and easy to store

Negatives:

--Dirty water pools in the bottom of the unit under the tank that collects the dirty water.

--The unit then leaks the dirty water out the bottom while using it.

--It is extremely difficult to clean.

--The dirty water never seems to be fully emptied even after taking the entire unit and dumping it upside down.

--It smells horrible! Even emptying it immediately after every use has not prevented it from smelling awful while using the machine. I think this is because the dirty water is never fully emptied. Hot, soapy water suctioned up after a clean up has not helped to remove the lingering smell.

Read Best Reviews of BISSELL 14005 Little Green Compact Carpet Cleaner Here

While this little machine cleans well but it is poorly design from a maintenance and easy of cleaning prospective. The catch tank is feed from the bottom through a 2 inch pipe that is split into two functions, return water and air return. The machine can never get all of the water up the 6 inches of feed pipe so it leaks out the bottom into the area under the catch tank (This area is nearly impossible to clean)! The dirty water feed should have been near the top of the tank and the air return should not be in the tank at all.

The tank does not lend itself to cleaning either. The return pipe has so many nooks and crannies that dirt builds up quickly, even with immediate rinsing and only after a half a dozen quick uses, and there is only a 1 inch hole in the top available to clean it. Another fault the catch tank is actually about 12 inches high but you can only use the bottom 6 due to the placement of return water outlet. All in all, the designers never used or had to clean this little green monster, neither should you! Don''t buy this.

Want BISSELL 14005 Little Green Compact Carpet Cleaner Discount?

We had a new puppy and needed some serious spot cleaning back up. I had used other Bissell machines in the past (you know, other puppies). This little machine does a great job of getting spots up and out. I sometimes use it in conjunction with spray on cleaners. However, this machine is difficult to keep clean. It has two chambers one for fresh soapy water and one for dirty water. The dirty water chamber has a complicated flow system (it''s the one on the right in the picture shown). Gunk gets trapped on the edges and tops of the dirty chamber and it doesn''t rinse out easily. There''s no way to take the bottom off and clean the inside of the machine. This means that you always have gunk in your machine sometimes smelly gunk. My other complaint is that the nozzle for the spray wand is miniscule and when it clogs water isn''t directed in a spray, it pools in a puddle. This model is the best I have found, but I think Bissell should make some improvements to the design. Oh yes, one more thing... I find that I can''t unwind the hose without unplugging and winding the power cord. This means you''re stuck juggling a dirty hose while winding the power cord.

Read More >>

12" Sediment 5 Micron Filter

I like this product as pre filter for carbon filters and reverse osmosis systems built in water coolers. In many cases, removing dirt is important from water to protect the next elements.

Read More >>

Sprite BBS Baby Shower Filter with HHC Cartridge Save 27% Off

• Especially for Bathing Baby In Chlorine Free Water
• Bathe Infants In The Kitchen Sink Using Faucet Adaptor
• Replaceable Filter Cartridge Rated for 3 Months Or 3,000 Gallons
• Easy Grip Shower Handle with Gentle Single Setting Spray
• When Baby Grows Connect To Any Existing Shower Arm

I purchased this because we badly needed a handheld shower to bathe our infant. I went down the path of replacing the tub spout (with one that had a diverter) but too much money and labor was involved. I looked at several other products that would let you attach a handheld to a sink faucet, but each one of those had issues. I am very happy to write that the Sprite Baby Shower was the perfect solution for us. It does not leak and the quick remove adapter really works well. It only take minutes to install it. The only problem we had was that the Chlorine filter was too long for our bathroom sink (in the manual they only want you to attach it to the kitchen sink which is much deeper), So I removed the chlorine filter and just used the handheld attachment. Works great!

Buy Sprite BBS Baby Shower Filter with HHC Cartridge Now

I purchased this product because I have very hard water. I found my hair felt entirely different after washing for the first time. Using this filtered product eliminates having to use a conditioner after shampooing. I am giving Sprite five stars for an excellent product.

Read Best Reviews of Sprite BBS Baby Shower Filter with HHC Cartridge Here

Everyone needs a tap and SHOWER filter in their house today. There is jet fuel in our tap water, cosmetic chemicals, pesticides, pharmaceuticals and more and we soak it up in EVERY SHOWER. PREVENT THIS NOW with a BABY SHOWER or any SHOWER FILTER. We''ve used one for 12 yrs now and never had to deal with dry skin or rashes.

SEE THE Documentary FLOW to learn more about the truth about our water supply. It''s shocking.

Read More >>

75 GPD Filmtec Residential RO Membrane Save 57% Off

• 75 Gallon Per Day (12 Liters per Hour) Capacity; FILMTEC Model TW30-1812-75
• 98% Stabilized Salt Rejection (Minimum Rejection 96%)
• NSF/ANSI Standard 58 listed
• Membrane Dimensions: 11.75" Overall Length, 1.75" Diameter (Fits Standard 2" ID Membrane Housings)

I have three RO systems a kitchen, a main ro for my salt water aquarium and one in my master bathroom. This one I have for my main RO and kitchen both using booster pumps and a piggy back membrane for twice the GPD and half the waste. Filmtec 75 GPD membranes are long lasting high quality membrane and I determine that by using dual TDS meters often yielding tds reading in the 5-7 PPM range. I would only run 2 systems except that my main system has a dual DI canister for aquarium use that demands 0 TDS. DI is not recommend for humans due to no minerals and the body over time changing chemistry no immediate threat just possible long term health issues. In both cases the 75 GPD is an excellent choice high output low TDS if you need lower TDS without the need of a DI stage a 24 GPD or lower GPD would be best.

Always remember to change out the restrictor to the correct size if you are increasing the GPD I have talked to the watts premier technical support and this membrane does work on all but one model and even then they told me if it fits it will work. I have a watts WP-5 highly modified that it worked just fine unfortunately not in use due to I cannot monitor all I need to monitor which are pressure drops between stages telling me when to change filters or regulate waste flow which later on I discovered the need to remove the built in restrictor I also couldn''t easily switch from a mechanical ASO to a more accurate ESO solonoid and Electronic pressure cut off. Ro systems are wasteful but can be made more efficient piggy backing membrane having 80-90 PSI and using electronic sensors and shut-offs. Filmtec 75 GPS is in my opinion the best overall choice quality VS. quantity and value 100 gpd is also an excellent choice but it starts to increase TDS %.

Just remember it is the prefilters that determine how long your membrane will last for Higher than 200 GPD you will need to change out more often I use a pressure gauge when the pressure drops I change them out. I rate the 75 Filmtec 5 out of 5 stars

Buy 75 GPD Filmtec Residential RO Membrane Now

Es un buen producto. Es muy útil y una gran comodidad poder comprarlo desde latin america. lo recomiendo para otras transacciones.

Read Best Reviews of 75 GPD Filmtec Residential RO Membrane Here

all went well. Even gave a warning to be sure all fit before opening packages to be able to return if wrong.

Want 75 GPD Filmtec Residential RO Membrane Discount?

This is a good product and very good price that I can find on internet. I recommend to others this product.

Save 57% Off

I like it, the quality of the product its great the price its good too, in general the product its great

Read More >>

5 Stage Reverse Osmosis Water Filter System With Storage Tank Removes Fluoride Save 5% Off

• Removes chlorine, heavy metals, such as barium, cadmium, chromium, lead and mercury
• High quality filters for superior performance
• NSF listed storage tank
• Automatic Shut-Off Valve eliminates waste by closing the feed line when the tank is full
• Chrome, long-reach, Lead-Free faucet. (Meets CA req.)

It makes me so sad that I have to leave such an awful review, and I''ve contacted the seller many times giving them an opportunity for another solution, but they''ve given me no choice. I purchased this item in August 2010 hoping for floride/chlorine free safe drinking water. When I received the unit, I unpacked it, checked the "easy" instructions and after several hours of frustration, called our handyman. It took him 4 hours and two trips to the hardware store to buy parts. Wasn''t a cheap install.

After installation, I began using the water for drinking, and also used it to fill our fountain. Our fountain immediately rusted and I grew concerned. I contacted the seller and they told me that they wouldn''t recommend the water for contact with metal but that it''s "totally safe" to drink. Really? I ordered a water test kit and found that the PH in the filtered drinking water was 4.5. I emailed the seller, scared to let my children drink the water after doing more research and finding that water with this PH was NOT recommended for drinking! Instead of letting me return the unit, they offered to sell me a part for $119 to rectify the problem. WHAT??? I decided to add minerals and lemon slices to the water and though still frustrated, didn''t want to invest more into this system.

A month later, I noticed that the unit was leaking out of one of the cartridges. I called a plumber out who told me that the unit was defective and to return it. I contacted the sellers and was told that they recall no other correspondence and that they could not accept the return. I had to pay to have the unit removed as it was destroying my cabinetry...more expense. Now, it sits in my garage... I offered to pay for the return shipping and eat all of in installation and uninstallation costs ($400) later plus a ruined fountain...and they simply refused to respond.

Do NOT do business with this company! I also recommend that Amazon no longer allow them to sell.

Buy 5 Stage Reverse Osmosis Water Filter System With Storage Tank Removes Fluoride Now

This seems to be a great RO system once you figure out how to install it... The instructions that come with it are pretty poor. If you aren''t familiar with a modest amount of plumbing, have someone else install it for you.

A few clues to make this go easier for you:

Not all the fittings that come with the system will necessarily work with YOUR current plumbing.

The color coded tubes didn''t match the instructions. This doesn''t matter EXCEPT FOR ONE: there is one tube with a little restricted fitting inserted. This is for your waste line. IT IS ABSOLUTELY NECESSARY TO GET THE SYSTEM TO OPERATE! This is what creates the back pressure for the system.

Looking from the front,

Your water input to the filter (from your cold water line) goes to the bottom right fitting (into the first big filter, it is labeled "IN" above the fitting.

Just above that is a "T" fitting, the open port goes to your tank.

They send a shutoff valve that goes on top of the tank that the nylon tube goes into.

On the left side of the membrane (lower horizontal cylinder) are 2 fittings, one used already, the other one goes to your drain (use the saddle valve provided).

The last tube goes on the left side of the top cylinder (your final filter) goes to your faucet.

Tips for your waste line:

IF you use an air gap faucet (required in some places, prevents drain backups from going into the RO system), the drain restrictor won''t fit on the faucet end so turn the tube around and have the restrictor in the fitting towards the RO membrane. To use an air gap faucet, you will need to do some creative plumbing to get the different size tube from the faucet to your drain. There are 3 ports on the faucet (1 on a normal faucet), 1 for clean water from your final filter, 1 normal sized coming from your membrane, and one larger tube to go to your drain. I got my faucet at my local plumbing supply house. (Home Depot didn''t have one). The air gap faucet does "burble" for a while after using the water but I consider it a small price to pay to make sure my system stays clean.

Tips for starting up your system:

When I first connected my system, I connected the water line to the input. I disconnected the tube from the leftmost carbon filter and attached a different tube and ran it into my sink. I turned the water on and flushed the excess carbon out of the filters for 5 minutes. This way all that carbon didn''t get into my tank and RO membrane. I have no evidence, but I believe this will extend the life of my membrane a little. After connecting everything, I turned the system on and nothing came out. It took about 10-20 minutes for the system to build enough pressure to come out of the faucet. I followed the instructions and ran about 10 gallons through the final filter before using the water.

I also added a quick connect "T" in the line going to my faucet AFTER flushing the system of carbon and ran one side to my faucet and the other to my refrigerator so I have clean ice and cold water. I did the flush first so I wouldn''t have to flush the carbon through my ice maker for who knows how long. When I replace the final carbon filter, I will disconnect my fridge until after I flush it again.

Also, since you are stripping your water of most or all of the minerals, please get some good quality liquid trace minerals to add back in with every glass you drink. Our bodies are meant to get a significant amount of minerals from our water.

Enjoy!

UPDATE 10/16/12

My water bills have gone up significantly as of late and this filter unit was the culprit. My bills kept going up over the summer so I thought it was watering but now that watering season is over my bills kept going up, last month $193! It was using almost 500 gallons of water per day. I diagnosed it because I put a really good shut-off valve on the input line and as soon as I cut it off my water meter stopped spinning. I don''t know what the defect is but please watch your water consumption with this filter.

Read Best Reviews of 5 Stage Reverse Osmosis Water Filter System With Storage Tank Removes Fluoride Here

I am pleased with the quality of the filter system and the quick shipping. I was very unhappy with the instructions for installation that were pretty much useless. No hose diagram or explanation as to how to install. I spent two days on the internet looking for a hose diagram and finally found a feedback site for this product and another customer had to get a plumber to explain how to install and he shared the instructions in his review, without his help our filter would still be sitting in the box. Once the filter was installed I was amazed at the difference in our water quality. Happy with the product, UNHAPPY with the lack of instructions for this unit.

Want 5 Stage Reverse Osmosis Water Filter System With Storage Tank Removes Fluoride Discount?

5 Stage Reverse Osmosis Water Filter System With Storage Tank Removes Fluoride

Even though I suspected that this seller has had issues with missing parts in the past, I ordered the item. Mea culpa!

Sure enough, the so-called "No. 1" locking push-cap intended to secure a tube to the No. 1 port was missing. This makes the ENTIRE device inoperable! And, I triple-checked the packaging!

Furthermore, the assembly instructions are poor with no page numbers (required) to which to refer, as one example. Fortunately, I have put a unit VERY similar to this one (All purveyors apparently use the same supplier.) from another source, and so this was not too much of an impediment. A newbie will have trouble.

Failing a VERY quick response, I will discuss this problem with my Credit Card company, read: will demand full credit.

The shipping charge for this product is high; high enough so that the seller has an obligation to provide good Quality Assurance that will assure an ability for me to use the product quickly without this kind of folderol.

Being made off-shore doesn''t help, either.

I will expect the missing part, tout suite, and some monetary compensation for my trouble and delay in using this item. Plan on it!

Finally, Amazon''s excellent reputation has been sullied; it''s time to drum this seller out of the family. Others that sell the same item for slightly more money are apparently better at providing a quality-packaged product.

__________________________________________________

Update as of 2-17-11

OK on your agreeing to send the missing part.

When will it arrive? How is it being sent?

What about demanded monetary compensation?

What about other comments?

Your response was not particularly responsive. If you want to garner customers, this is NOT the way to do it.

--

Regards,

Gerald B. Curtis

__________

On Feb 17, 2011, at 9:51 AM, Purenex Amazon Marketplace wrote:

Dear Gerald B. Curtis,

We do understand your frustration, we strongly apologize and sorry for the inconvenience,

However all products are factory packed and sealed.

We definitely do not want our customer to be unsatisfied with our service, therefore we sending you that No.1 missing part.

Thank you,

Purenex.

Save 5% Off

The 5 stage RO system was from Purenex but nowhere on the unit was any Brand name displayed. The mounting holes had rust around them that look like the unit had been mounted before. The instructions were not for this piece of equipement but were generic in nature. The product was also missing the drain flow restrictor with out which the unit does not operate. There was no contact information with the shipment; no phone no., customer contact, web site...nothing. I found Purenex on the internet and it said it was a 1 man operation in N.Y. I had to go through Amazon to get the contact information and even they didn''t have a phone number. Amazon does allow you to e-mail the seller through them which worked well but was complicated somewhat.

Once I was able to get the message to Purenex they responded the same day with shipping information for the restrictor. The unit was not difficult to install and functions but doesn''t come close to delivering the amount of water advertised. And yes, all the lines are connected correctly and the tank pressure is 7-8 lbs. I would not buy this system again.

Hope this is helpful.

Read More >>

Honeywell HC22E1003 Replacement Whole House Humidifier Pad Save 44% Off

• Superior to and replaces Aprilaire #10 water panel
• Fits Honeywell HE220 and HE225 series humidifiers
• Antimicrobial coating helps reduce microbe growth on pad
• This item contains to complete replacement pads
• Water panel design dramatically reduces bacteria growth

I ordered the wrong item but the seller quickly sent me the correct

item at no cost

Buy Honeywell HC22E1003 Replacement Whole House Humidifier Pad Now

This product works as advertised, but ensure the filter fits your particular model. Due to construction, it is very hard to trim in case you made an ordering mistake.

Read More >>

Sweetfilter Washing Machine Filter Lint Trap Can Double The Life of Septic Tank Systems Save 47% Off

• Discharge water from a washing machine is laced with enough lint, hair, and non-biodegradeable fibers to carpet your living room once a year. When it drains into a utility sink, the debris clogs the drainpipes and can destroy your septic tank system.
• Our polyester bag traps lint before it enters the drain by fastening it over the end of the washer discharge hose. Bypass valve prevents overloading and expensive damage to washer pump.
• Our LT-1 kit has a finer mesh to trap more fibers than any other filter tested.4 X the capacity and 400 X lint removal of other traps tested.
• One package includes 1 lint traps and locking velcro straps. To insure maximum septic tank life replace the LT-1 every 2-3 weeks.
• 30 day money back warranty.

Ordered this filter product in hopes that it would attach better to our washing machine''s hose that drains into a stationary tub and is then pumped. We have had issues in the past with our pump getting clogged with lint and hair which leads to leaks. The product certainly traps lint but the issue was keeping the filter attached to the hose. The velcro attachments do not hold well and once they get wet they are even less effective. The picture shows an orange zip tie and white filter however we received gray velcro bands and a black cloth filter (which made it harder to see the lint when cleaning). I also found that the filter was not easy to clean, the lint just sticks too well. This means you will have to replace the filter often. We are back to using nylon socks and attach with zip ties or a strong rubberband. They are also much easier to clean and seem to last longer for us. I would not recommend this product but it may work better for you.

Buy Sweetfilter Washing Machine Filter Lint Trap Can Double The Life of Septic Tank Systems Now

This thing works so good I have to clean it out every week. It traps 100% of dog hair which in turn traps 100% of dirt, therefore clogging this guy weekly. Thus: If you are looking for something to just trap large items which may clog your drain, this isn''t for you. If you are looking for something to keep all residue from your drain, this is perfect.

Read Best Reviews of Sweetfilter Washing Machine Filter Lint Trap Can Double The Life of Septic Tank Systems Here

The Sweetfilter Washing Machine Filter/Lint trap is pretty good. It basically gets the job done, though I''m still convinced there''s a much better design out there that hasn''t been exploited yet. The velcro strap that it comes with to tighten on to the tube from your washing machine doesn''t work for beans. You need to go with a hose clamp -which you can pick up at any hardware store (in the plumbing or automotive departments) -it''s the only thing that will reliably hold your sweetfilter on. This really should standard with the shipped out product.

Want Sweetfilter Washing Machine Filter Lint Trap Can Double The Life of Septic Tank Systems Discount?

i do not think i would recommend this product. It is difficult to clean and the end piece comes off easily.

Save 47% Off

The lint trap or filter was not what was described in the amazon write up. Directions were so small you needed a magnifying glass to read it.

Read More >>

BISSELL Steam Mop Select Save 25% Off

Review summary: Light and easy to use. Cleaned really dirty floors with just the steam from distilled water. No need for other cleaning products. Steam cleaning leaves the cleaned floors lightly damp but they dry quickly. Cleaning pad is larger than other models with a two-sided pad (13 inches by 4-5 inches). Comes with two different cleaning pads, one soft pad and one with scrubbing strips. Because the pads and cleaning surface is two-sided, you can clean twice as much area with one pad.

Recommendation: If you want to clean your floors without a bucket of water and a mop or scrub brush or without the chemicals and disposable cloths of Swiffer-type products, this will work for you. If you want to sanitize your floors (crawling baby?), it will do that but will take longer as you have to hold the mop in place for a certain number of seconds for germ/bacteria killing.

Now for all the dirty (literally) details:

I gave this steam mop a test like it has never been given in any demonstration you''ve ever seen for a floor cleaner and it performed better than expected. I have 50-year-old linoleum that has lost any shiny surface it ever had, so dirt sticks to it much more than it would on newer floors. The seam is starting to loosen so I worry that all the water from traditional mopping will open it up even more. True confession time: I haven''t mopped my kitchen floor all summer and it was really filthy. Under the toe kicks in front of the sink, it was simply disgusting. Add to that, I dropped and broke a jar of enchilada sauce on the floor last weekend. I used a dry paper towel to get up most of the mess but I knew this steam mop was on the way so I left the residue to see how this steam mop would handle it. I saw a demonstration of this product on one of the TV shopping channels and I guarantee that none of the "messes" they had on the floors were anything like the condition of my floor.

OK, enough about my terrible housekeeping. The package arrived last night. The box looked a little small for what I was expecting and that''s because the mop comes in three pieces. I pulled out the instruction booklet and it was really easy to assemble. No tools required. The floor piece snaps into the bottom of the main body and the handle piece snaps into the top of the main body. I continued reading the instructions on how to use the product and realized they recommend using distilled water. I have super hard water and no distilled water on hand so I made a quick run to the store. NOTE: If you don''t already have some distilled water, put it on your shopping list to pick up before your order comes so you don''t need to waste the gas for an extra trip.

Now I was ready to test this baby out on my disgusting kitchen floor. I wrapped most of the 18 foot cord around the hooks on the handle because I was going to first concentrate on the spot where the enchilada sauce was and that was near the outlet. I put the scrubbing cloth on, filled the water tank, plugged the steam mop in and waited the 30 seconds for it to be ready to use then compressed the steam trigger and ran it over the dried mess. Nothing. What? I pushed it back and forth a couple times and there was no visible change. Then I realized that the steam may be coming but the cloth was still dry. I held it in place and squeezed the trigger for about 30 seconds and tried again. It wasn''t immediate, but gradually the dried sauce started coming off my floor. The longer I worked, the better it worked. I think they must pre-dampen the cloths for the demonstration videos to make them work so soon after starting. And it took more than a couple swipes to get it off. The thicker the dried sauce, the longer it took. In fairness, if I were mopping I would have put some water on the spot then go elsewhere until it softened. And it emphasized that the "dried on" stuff they use in the demos isn''t real world dried on crud. But most importantly, the steam mop worked to remove the dried on enchilada sauce without scrubbing or pouring a bunch of water on it.

Then I moved on to the simply dirty parts of my floor. The steam mop worked much more quickly on these areas, but because my flooring is so old with no shiny surface, it still took a few passes to clean. But again it cleaned without a bucket of water and didn''t leave dirty sloppy water behind. Because my floor was so dirty (not to mention the sauce residue), the first side of the scrubbing cloth soon got so dirty it started smearing the floor rather than cleaning it. Here is where the new feature of this steam mop comes in. You lift the mop so the cleaning pad goes vertical and then put it down so it flips to the clean side of the cloth!

Last, I went to the disgusting dirty build-up under the toe kick in front of my sink. This was the true test of this steam mop. If it can clean this, it can clean anything. Without the steam mop, I''d have gone after it with a scrub brush and then had to mop up filthy water. I left the steam mop in place and squeezed the steam trigger for at least 30 seconds to soften up. It took more work than the dried on sauce but the steam mop cleaned it without having to muscle it clean!

Eventually both sides of the cloth were completely dirty so I unplugged the steam mop and carefully pulled the velcro strips apart to take the cloth off and put it in my wash. There are two cloths, one with scrubbing surface and one that is softer for wood floors. I like the fact that it uses washable cloths not disposable ones and that it uses nothing but water to clean. I wasn''t sure that water alone could clean the dried-on sauce or the seriously dirty floor but the steam made it work. And I especially like that the steam didn''t leave a ton of water on the floor -just a slightly damp area that dried quickly. I don''t want to pour dirty wash water down the drain but also don''t like pouring it outside.

As long as you don''t let your floors get as bad as mine (and don''t tempt fate by letting spilled sauces dry for several days on the floor), this should work for you much more quickly than it did for me. Perhaps even as quickly as they show on the demos (at least once the cloths get damp from the steam).

Next step will be the bathroom tile floor, which isn''t as neglected as the kitchen but where the scoopable cat litter that gets tracked out of the litter box combines with wet feet from the shower to put a gray haze on the tile.

My favorite thing about this is that I can clean my floor without getting out a bucket and mop and dealing with the dirty water. Because of that, I expect to clean my floors regularly so they will never again get so awful.

My first thought when I unboxed this was "This is all the water the tank will hold?" It''s a fraction of my H2O mop''s water tank. Second thought was that I didn''t like it being all the way on the bottom, compared to the higher position on the H2O mop. But it turns out that this mop doesn''t use as much water as the H2O mop, so that smaller tank lasted at least as long as the other mop''s larger tank did.

Annoyance unlike the H2O mop, it''s not a turn on / turn off trigger. You have to HOLD the trigger the entire time. That''s a definite minus in the comparison. It gets to be a pain when you''re trying to maneuver and keep pressure on it while scrubbing the floors.

The other letdown was that there''s no positive indicator that it''s hot enough. You just have to wait 30 seconds and then go ahead. The H2O mop had the power indicator change color to indicate when it was hot enough to use. Little touches that made it seem to be a better thought out product.

The plus is the double sided head. They include two pads, one with the scrubbing pads on both sides, and another that''s more of the regular microfiber type. The regular one works about as well as the one I''ve been used to with the other steam mop I''ve got, but the scrubber one really did a great job compared to the H2O mop. It did a much better job of getting those sticky spots where spills happened, or anything that''s still a little gunked up from my 7 year old. And having this much cleaning area times two, so you can just flip yourself around and keep going with the other side of the mop head. What this meant for me was less "cleanup" after the floor dried. With the H2O mop, you''d end up with some hair, crumbs, and such, here and there because it all built up around the edge and eventually would get pushed off as you changed direction. This one, since you can flip it over part way through the job, you''re not left pushing the same dirty material around until it finally works its way off of the material again.

It''s light and easy to use, and can work its way into places a little easier than the H2O mop because of the shape. It rotates and moves easily, and does not make as much noise as the H2O mop. That makes a low hum, like a barber''s trimmer, whereas this just makes some soft noises as it pumps water slowly.

Less water used means less time for the floor to dry as well, without sacrificing the cleaning ability.

If it weren''t for the fact that you have to hold the trigger to keep it moving water through, I would''ve given it a 5, but that''s enough of an annoyance that for me, it cost one star. Other than that, a solid product that works well.

Buy BISSELL Steam Mop Select Now

I''ve used a variety of floor cleaners ranging from two different iRobot Scooba models, switers, a Hoover floor cleaner and now this steam mop from Bissell.

The primary advantage of this cleaner is that it works with just water. If you have very young children that LIVE on the floor (as in crawling) this can be very attractive because you don''t need to use harsh chemicals to clean the floor as nearly all of the other cleaners do. (Although the latest Scooba from iRobot uses an enzyme based cleaner -it is HORRIBLE at cleaning).

I found the Bissell cleaned well and the removable mop head easily washed. Environmentally, this is THE best possible solution.

Disadvantages include that this is certainly more work than an iRobot to USE (but this is less work to clean-up). Clean up is simple, remove the mop head and put it into the washer. The Hoover and iRobots machine have to be disassembled and cleaned.

Although it may be possible to use it on some wood floors the instructions warn against possible damage to the finish. I tested it on a small area of a wood floor and it literally removed the top coat of polyurethane (who knew -you can use this to strip your floors -just kidding, it obviously is not designed for that). The greater risk is that the steam can warp the wood. Clearly it is designed for tile, stone, and possibly synthetic (Armstrong/Pergo) plastic floors.

Read Best Reviews of BISSELL Steam Mop Select Here

This is the first steam mop I have ever owned, so I cannot make any comparisons and I don''t know what''s considered standard or not, so I will offer my opinion on this mop in particular.

I thoroughly read through the instructions before beginning. When using the first time I filled the tank with tap water (distilled is recommended to extend product life, but not required I didn''t have any distilled), plugged it in and waited the required 30 seconds before using. After 30 seconds it took about 20 seconds of holding the trigger down for the steam to come through the mop enough to be wet.

Pros:

Easy to maneuver

Cleaned very well on wood floors (solid oak and bamboo), vinyl, and tile

Dried quickly

LOVE that the mop head flips over so easily so you can do a lot of continuous cleaning

Cons:

It falls down SO easily! It swivels so easily that it doesn''t stand up well. I have only been able to stand it up perfectly in a corner, otherwise it''s constantly falling.

I have to hold the trigger down continuously it would be nice if there was some sort of lock option to lock the trigger down when doing a large room or multiple rooms.

Overall it''s a great product and has been working well for us. I gave it 4 stars rather than 5 mostly due to the fact that it continually falls down! I''m so afraid it''s going to crack the handle or the tank one of these days because it''s so touchy. It cleans very well though.

Want BISSELL Steam Mop Select Discount?

We have a 1423 square foot home with all wood floors. The outside patios both have slate floors. The house is old and the floors haven''t been re-done since it was built in 1947 however they are in pretty decent shape. After using this throughout the house I was amazed on how well it worked! Not only did it clean and sanitize, the floors look better then they have in years.

I used it on the slate and it did an amazing job also however the slate is only a few months old so although it did clean I''m not sure it did any better of a job then when I just damp mop them.

Love the way the mop will flip over so easily also. Wasn''t expecting so much for the price so I''m more than happy with it and would recommend it to anyone thinking of purchasing one.

The only reason for the 4 stars is it could have a longer cord. For the life of me I can''t understand why these manufacturers don''t make longer cords!

Save 25% Off

Read More >>

Blueair 200/300 Series Particle Replacement Filter Save 38% Off

The only reason for 4 stars is that the price keeps going up and they are very pricey. They work very well at keeping the air clean.

Awesome product. Has saved my life, I am asthmatic and it has made a world of difference. Just wish the price was not climbing steadily......

Buy Blueair 200/300 Series Particle Replacement Filter Now

Like most air filters I think these are way overpriced. By running my filter continuously on low they last a full year instead of the 6 months they recommend.

Read Best Reviews of Blueair 200/300 Series Particle Replacement Filter Here

I like these filters better than the 400 series filters. The 200/300 series are pretty small, easy to dispose of, only go into the machine one way and they capture a ton of particulate matter.

Want Blueair 200/300 Series Particle Replacement Filter Discount?

air purifier is great...it does what it states. It is great at removing the odor from our wood burning fireplace and also removes cooking odors well. ONE issue I have is that the filter is STUPENDOUSLY OVER-PRICED. What is up with that??????

Save 38% Off

Read More >>

Medelco #4 Cone Permanent Coffee Filter Save 100% Off

Descriptions claims its for use in ALL, not MOST #4 Cone filtered coffee makers. Not so. Doesn''t fit my Gevalia coffee maker -I can''t even close the lid. Not worth paying to return it, so I guess I''ll cut the top ring and handle off and make it fit or throw it out.

I''ve been using this filter for about two weeks now. It is my first permanent filter, and I am very happy with its performance. It is solidly built, and with proper care should last quite a while. I debated on the high-end swiss gold filter, but thought the price was too high, so I figured I''d take a chance with this one with free shipping. I can''t imagine how much better/different the swiss gold would be if any? I am using a fairly fine ground from a good, flat burr grinder, and have had no issues of grounds/sludge in my coffee. I also purchased a new Zojirushi coffee maker at the same time, so read my review on that as well if you''re in the market for a good machine. This filter fits the Zoji perfectly.

Buy Medelco #4 Cone Permanent Coffee Filter Now

I bought the Medelco #4 cone permanent coffee filter as a substitute for a Braun UGSF4 filter. Unfortunately, it''s not a really good substitute. Although the Medelco coffee filter will fit in a Braun coffee maker, it''s not as tall and tapered as the Braun UGSF4. As a result, it doesn''t concentrate the coffee as much when it is moving through the filter so you have to substantially increase the amount of ground coffee that you are using for the same strength of coffee. So while the Medelco is initially cheaper than the corresponding Braun filter, one would end up spending much more money in the long run because you would use more ground coffee. My advice is to search the net (including e-bay) to find a genuine Braun gold filter...even though it will likely be more expensive than the Medelco filter, you''ll be much happier in the long run.

Read Best Reviews of Medelco #4 Cone Permanent Coffee Filter Here

I purchased this because, after about 8 months or so, I started noticing tiny holes/tears forming in the bottom of the permanent filter that came from the factory with my Braun coffee maker. It seemed to allow some of the smaller coffee grounds to come through during brewing. This product partially solved the problem. However, a more general issue with these permanent filters is that, even when they are intact, they do not filter as many particulates from the coffee as a paper filter. If you grind your own beans as I do, and your grind is on the finer side, a certain amount of ''residue'' is going to come through these filters that would be stopped by a paper filter. Just keep that in mind, and don''t drink those last few drops!

Want Medelco #4 Cone Permanent Coffee Filter Discount?

A couple of years ago, I received a French Press Coffee maker as a present, and it made coffee that was clearly superior to coffee made in the drip coffee maker. One morning I looked more closely at the coffee in the French Press and noticed oils on the surface and realized that the "moist" look on the beans was possibly oils. When making coffee in the French press, it had no paper filter, and I deduced that this was because there was no paper filter to absorb the oils. This could be remedied in my drip maker with a permanent mesh filter. I went through a couple of these before I finally bought this one, which fits my Zojirushi coffee maker. The quality of my coffee improved as the oils found their way through the filtering. I recommend this filter for all you picky coffee drinkers.

Save 100% Off

Read More >>

Eureka RD Style Belts Save 1% Off

The belts were amazing. They were round just like the picture, and when they are installed on the vacuum, that''s when the fun really starts! The motor starts spinning and then the belts start spinning, which cause the brushes to spin and start to go to work on the carpet. If you have never seen a vacuum cleaner with new belts, you are in for a treat, because these belts really spin. They may be the best spinning, most roundest, belts ever. Boy oh boy do they spin.

These belts were generic knockoffs of Eureka belts. They were not packaged, just put into the shipping envelope with a printed sheet written in poor English. No indication of the country where the belts were manufacutured. This sheet told you what a good deal you got by the seller choosing to buy them in bulk from the manufacturer, and not having to waste packaging material. Isn''t that thoughtful? No printing or numbers on the belts.

Genuine Eureka belts come two to a package, have the Eureka name printed on it, and have "EU TYPE RD" engraved in each belt. Also, Eureka does not sell their belts in bulk to vendors.

Don''t be fooled by the words "Eureka Style." This is just weasel wording for a cheap imitation of the genuine Eureka belts. The price sounds like a real bargain, but it''s not. If it''s too good to be true, it probably is. I don''t like to be fooled.

Buy Eureka RD Style Belts Now

These are the real deal. AUTHENTIC Eureka belts for use with the Sanitaire''s and any other of the older style uprights that have the belt running down the middle of the brushroll. I have tried generic belts in the past and most have suffered from premature failure and "burnout". Some have even cracked and broke as a result of the heat and friction created when the motor is running. It all depends on the type--and quality--of the rubber folks. There is a reason manufacturers recommend sticking with genuine replacement parts. Though generic belts/bags *may* fill the void, my experience has always been less than positive. These fit my 30+ year old Eureka upright perfectly and make it run like new once again. I also refuse to part with this machine because I firmly believe it outperforms many of the newer models on the market today. What''s more, the maintenance and design of these older vacuums are such that you can usually do the work yourself. If you understand how these vacuums work and are mechanically inclined, they are virtually maintenance free. There is literally nothing that can go wrong on these machines except the belt and the occasional light burnout. I generally need to change my mine roughly every 2-3 months depending on use. Also, carpets with tassels and loose threads wreak havoc on these things--get rid of them. They are nothing but a nuisance anyway. Overall, I''m quite pleased and hope that Eureka continues to make these available for the long term.

Read Best Reviews of Eureka RD Style Belts Here

My current still usable Eureka belts came inside a Eureka bag from the Eureka factory,AND each belt has the Eureka initials printed on them along with other factory info.

The belts I received in the mail arrived in a shipping envelope by themselves,no Eureka bag,AND there was no Eureka initials nor any other info printed on the belts...I haven''t used one of these new belts yet (old belts not worn out),they look and feel like they''ll do the job,but I don''t think these belts are made by Eureka.I suspect that they''re foreign made copies.

So if these belts don''t work right or last,then I''ll know why...I really don''t like bait-and-switch or deceptive ads or packaging regardless of the merits of the product itself.Nor do I want to buy imported knockoffs no matter how cheap.

Want Eureka RD Style Belts Discount?

I ordered this belt for my vacuum and it turned out to be the wrong one. GoVacuum customer service researched the correct belt and offered to not only give me a refund, but send the correct belt free of charge. Very nice people to deal with and extremely knowledgeable about products. They get a A+ from me.

Save 1% Off

Read More >>

Mr. Coffee ISX43-1 12-Cup Programmable Coffeemaker Save 21% Off

I''ve been using this Mr. Coffee machine (model ISX43) for a couple of weeks and am very happy with it. The controls are very accessible and easy to use. The coffee is hot enough immediately after brewing and the machine is easy to cleanup. It comes with a water filter which I guess could be useful if your water has particulate matter in it, but for me it''s unnecessary. The machine is fairly tall and the top is hinged at the back and flips up, so you need a quite a lot of room above to open it. Also, the opening in the top to pour in the water is fairly small I have to use the carafe and pour carefully to avoid spilling. The controls include a clock and timer for delayed brewing, a regular and strong brew setting (I can''t really tell the difference) and a cleaning cycle which I haven''t tried yet. The clock is so bright you could use it for a night light. There''s also a temperature control for the hot plate (which turns off automatically after two hours). Last, I''m a fan of chrome and black appliances and find this unit quite stylish.

Edit: I''ve had this machine for almost four years now and I''m surprised at the many negative reviews. It seems there are quality control issues as I''ve not had any problems with the machine. I''ve needed to replace the carafe a couple of times the lip & handle are glued to the top of the glass which deteriorates over time and starts to leak, but that''s all. I have to wonder how often the overflow problems are caused by the carafe not being positioned properly? This model has the feature where you can remove the carafe before the pot has finished brewing to pour a cup replacing the carafe properly allows the basket to resume dripping, but if it isn''t positioned correctly the basket will overflow. The coffee has always been hot enough and I have the hotplate thermostat at the lowest setting. Someone said this pot doesn''t brew 2-4 cups properly and that also hasn''t been my experience. When I brew 2 cups I do use a little more coffee and I switch the brew setting to "strong" the result is fine.

I agree with the two above reviews as far as they go, but I''ve had mine for a year now, and it now makes the weakest coffee on earth. At first, running it through the cleaning cycle solved the problem, but now nothing helps. I use twice the amount of coffee I used to use to get the same result. That''s an expensive cup of coffee!!! I also run it through the cleaning cycle once a week (I only make coffee once a day, so that''s excessive.) Not to mention the hassle of having to clean it so often. It takes an hour to run through the clean cycle, and then you have to make a full pot of hot water twice to clean the vinegar/cleaning solution out of the coffee maker. I just cleaned it yet again, made coffee, and it tastes like muddy water.

Buy Mr. Coffee ISX43-1 12-Cup Programmable Coffeemaker Now

I''ve had and used this coffeemaker daily for about 4 years. I also received a stainless steel carafe version of it, but that''s another story... I gave that one away. Anyway, this one has the glass carafe. All in all, it''s been pretty good, but as it ages, there are several issues developing.

Pros:

Makes a pretty good cup of coffee

Is programmable, and fairly convenient to do so

Has an adjustable warming plate setting

Cons:

Not easy to tell if basket is properly seated, resulting in overflow and MESS

Mine has controls with very small black lettering on red background; VERY hard to read

Does not always pour well

Read Best Reviews of Mr. Coffee ISX43-1 12-Cup Programmable Coffeemaker Here

Within a couple weeks of getting this coffee pot, we had an overflow incident. All over the counter. Then it would brew only half and stop. So I read the manual and did the clean cycle, even only after this short of period. It would work okay for awhile, and then do the same thing. Or often grounds are in our coffee or tea. Cleaning it doesn''t help any more.

Want Mr. Coffee ISX43-1 12-Cup Programmable Coffeemaker Discount?

I have been using this coffee maker for two months and like it a lot. I bought it mainly because it is almost unique in having an adjustable warmer plate, so that you can adjust the warmer plate to how many cups are left. Very useful. But easy to forget, as you take cups, and leave it too high. A white mark on the knob would be nice, so that its position is easier to read/notice. Other nice features of this product: 1) Two hour automatic shut off with visual indicator of time left. Sounds corny but actually quite nice. 2) Beep when brewed coffee is ready. 3) Pot pours much better than most. 4) Easy to use. (I''ve never tried using the clock stuff.) 5) Good water level indicators. The only negatives that I''ve found are that it''s fairly tall and might not fit some places, and it looses at least 1/2 cup of water in grounds and left all over the inside of the tank.

Save 21% Off

Read More >>

Bodum Bean Ice French Press 1.5 Litre Iced Coffeemaker Save 29% Off

I got this to make cold brew coffee concentrate and it works perfectly and easily. It is also great for large batches of hot brew too.

COLD BREW:

1. Add 12 scoops medium course grounds (scoop included)

2. Fill beaker half way with filtered water, stir grounds into water for about 35 seconds to saturate all the coffee

3. Fill remaining volume with filtered water leaving 1/2 inch room at the top

4. Place the bonus lid on french press and put in refrigerator for 12-24 hours depending on strength desired**

5. Once steeped for hours desired, remove lid and put filter lid on and press grounds to bottom of beaker

6. Mix coffee concentrate with water, either 1 parts concentrate to 2 parts water, or up to half concentrate and half H2O

I use 1/2 coffee concentrate, 1/2 milk over ice because I like it strong. My hubby prefers hot black coffee made with the concentrate and uses the half concentrate and half H2O ratio, then heats it in the microwave. We notice a definite absence of acid, which my husband prefers for taste reasons and I like because of taste and health reasons. When I am under stress, I have to take acid reduction pills for my stomach, being able to drink cold brew when under the gun has given me back my beloved cup of coffee without the stomach cramps.

TIP: Always use filtered water for cold brew since you will taste any and all funky flavors in your tap water. The water for cold brew doesn''t get boiled so these flavors, which may disappear with boiling for hot coffee, are very present with cold brew.

**If you have the overhead clearance in your fridge, you can put the filter lid on and press it down about an inch to keep all the grounds under the waterline. The top knob will stick up about 8 inches, so be careful not to hit the lightbulb in the ceiling of your fridge. I have noticed a small difference in flavor, it comes out a bit richer/darker than if I use the bonus lid.

-------------------------------------------------------------------------

HOT BREW:

1. Add 12 scoops medium course grounds (scoop included)

2. Fill beaker with water that is just under boiling hot, leaving 1/2 inch room at the top

3. Stir grounds into water for about 15 seconds to saturate all the coffee (saturation is quicker in hot water)

4. Place filter lid on beaker, but don''t press down until coffee has steeped for 4 minutes

This massive french press makes enough hot coffee to fill a carafe to the top and have a whole large mug of coffee left to pour. This worked great for a large party we had this past weekend, because I only have to make one pot of coffee instead of two like I did with our 8 cup Chambord press.

-------------------------------------------------------------------------

10 OTHER PROS:

1. It is nice that this one appliance does two jobs perfectly, it cuts down on the amount of kitchen clutter

2. No filters to buy

3. It cleans VERY easily and quickly

4. If you follow the directions, it is foolproof

5. It is sturdy and feels very well made even though the casing is plastic

6. Looks great, I leave ours out on the counter

7. It has a rubber seal and a thumb pressure pour spout, so coffee doesn''t spill out if jostled in the fridge

8. 50 oz. of concentrate will last us all work week, so I only have to fill it on Sunday speedy mornings!

9. There are no small screws or bits to lose, everything dismantles quickly with just a turn of the filter base

10.The handle is well designed, keeping your knuckles away from the glass if you are making hot coffee

Final tip: To get the top off when you first take it out of the box, twist the top a half inch and then pull the press screen out to remove the lid. There is a twist latch in this lid that my other Bodum french press does not have, and the instructions for using this press are folded up INSIDE the closed coffee press, LOL. Thought I''d pass on this bit of advice for those used to their Chambord press :)

UPDATE: After using this product constantly for over 3 months, I have to say it is one of the all-time best things in my kitchen. I don''t have to take as much acid-reduction medication as I did while drinking hot brew. The system is so streamlined for cold-brew concentrate that I don''t even have to think about it. My hubby cannot believe how delicious cold-brew concentrate is heated up every morning, he says it is the smoothest way to brew coffee that he has ever had. I still highly recommend this product and will be purchasing more for gifts.

BONUS IDEA: I have been adding chicory in with my coffee grounds and it is amazing. Every batch is super smooth, rich and dark. I got it here on amazon on subscribe & save: Community Coffee Private Reserve Ground Coffee, Medium-Dark Roast, 100% Chicory, 12-Ounce Bags (Pack of 6). I add 3 tbls. of chicory to 8 bodum scoops of coffee beans. I read other places that chicory was great in cold brew, but I was hesitant about buying 6 bags without trying it; I am so glad I just spent the $13 to find out -I do not make cold brew without it now.

This is a large French press coffee maker that has a seal-tight lid that can transform it in to a cold brew coffee maker. I mainly use this for hot coffee but when my brother-in-law was visiting, I used it for cold brew; cold brew tends to lessen the irritation of the stomach than regular hot brewed coffee because it is less acidic. He can drink cold brew with no stomach irritation.

Pros:

-Large Size 1.5 Liter I don''t have to make 2 pots of press coffee with this size.

-2 tight fitting lids with rubber seals. The lids makes brewing cold in the fridge a snap; the coffee does not smell up the fridge or take on other odors.

-Glass Jug Glass is best for brewing coffee hot or cold; it''s easier to clean & odors don''t cling. And no concerns about BPA or plastic flavor.

-Nice stainless press mechanism that comes apart for cleaning. I take it apart & run it through the dishwasher along with the glass jug. I put the plastic body through also with no problems.

-Pouring lever & spout

Con:

-Plastic body. I prefer stainless steel because the plastic may break over time. But, the plastic does seem to be a good quality & the colors are fun. I own other Bodum products; they are durable and well made.

FYI: If you already own a coffee press, you can use it to make cold brew too. However, this version has the added benefit of size & the tight fitting rubber seals on both the press mechanism lid & the extra serving/storage lid.

My recipe for cold brew:

I use a 4:1 ratio of water to ground coffee.

I put 4 cups of fresh cold water in the jug and add 1 cup COARSE ground coffee. Stir it, put the press mechanism/lid on & place in refrigerator for at least 12 hours and up to 24 hours. After 12-24 hours, press the coffee down & either store the coffee concentrate (the liquid) in this container or another glass pitcher/jar after disposing of the grounds.

This press comes with a separate lid so you can store the concentrate in the jug but you will want to remove the grounds from it if you do that. Coarse ground coffee makes a better brew. The beans can become overextracted if they are too finely ground & some of the fine sediment will escape the press filter to leave sludge in your cup. You can pour your concentrate through a paper coffee filter but you will lose some of the taste complexity.

You can store the coffee concentrate in the refrigerator for a week with no problem.

To make hot coffee with the cold brew concentrate: Just pour half a cup of coffee concentrate & add hot water to taste. I usually do this in a 1:1 ratio (coffee concentrate to hot water). You can make 1 serving easily by half filling your coffee cup w/cold water, zap in microwave until hot & then add the coffee concentrate.

To make iced coffee with the cold brew concentrate: Put ice in glass, fill glass ¾ full with concentrate & top off with cold water & cream.

Buy Bodum Bean Ice French Press 1.5 Litre Iced Coffeemaker Now

I love my coffee, but it does''t love me so much anymore. I drink a lot of coffee. Mostly espresso, straight up -no milk, no syrup, but after having a lot of heartburn and acid reflux (and later finding out I had an ulcer) I was told I had to give up coffee. The withdrawal symptoms were awful, even worse to me than the ulcer pain. I tried Caffeine gum, but it tasted awful (eventually that didn''t matter and I chewed it anyway just because the headaches from the lack of caffeine were so bad)

Next, I tried Pre-made cold-brewed coffee, but the shipping prices made that really expensive, and I really didn''t like the taste. I tried a couple of the toddy type systems too, and while they work, I found one system was too messy and the filter often clogged. The Second system leaked out all over the fridge during the night.

But this works. Easy, no-mess, It doesn''t leak, and the used grounds just rinse away when you''ve finished drinking the coffee. It is just a big french press, so If you already have one, you should use it, but this one is a great size, and seems very well made.

I find I like it best, after it''s brewed overnight, but I think it''s drinkable after 4 hours if you don''t dilute it.

Read Best Reviews of Bodum Bean Ice French Press 1.5 Litre Iced Coffeemaker Here

The Bodum makes fine cold brew. The quality of the product seems good as well. The way the multi part lid is designed / manufactured places a lot of stress on the plastic guiding tube on the top piece. To get the lid on and off, you have to rotate so the spout is to the left

of the slot in the lower lid section. Then you twist it straight. To get the lid off, you twist to the left and pull up on the ball connected to the metal plunger. There is a thin plastic guide for the metal rod in the upper lid, and mine broke off....Just be careful as the lid is very tight,

and the part is fragile. I will have to order a new lid part from Bodum.

Here''s the real "weak link" for me with this brewer--the quality of the cold brew. When I bought this, I also bought a Toddy system. The toddy is designed for cold brew, and even though that system feels cheaply made, the quality of the cold brew is fantastic. It also makes 2 weeks worth of coffee with one batch, rather than the much smaller bodum. Once you get the hang of the schedule, either one works. It is just that you are cleaning up grounds more often with this than with the toddy, and in exchange you get a weaker cold brew as well.

Want Bodum Bean Ice French Press 1.5 Litre Iced Coffeemaker Discount?

Just got this coffee press because of the larger capacity than my 1 litre bodum coffee press (Brazil). When I opened the package all was well and good, however when I finally got the lid off it turns out that the rubber seal got stuck to the glass. No wonder I had a hard time opening the lid despite having twisted it into the proper open position! So now since the rubber gasket is torn from sticking to the glass, I have to find a replacement. The ring of rubber stuck to the glass had to be scraped off using my fingernail it was that stuck on. I hope they ship the newer stock without the gasket installed so other people won''t have to experience what I just did. Can''t return it since I''m overseas too, bummer.

Save 29% Off

Read More >>