Showing posts with label water filter systems for home. Show all posts
Showing posts with label water filter systems for home. Show all posts

BUNN HT Phase Brew 8-Cup Thermal Carafe Home Coffee Brewer Save 13% Off

BUNN HT Phase Brew 8-Cup Thermal Carafe Home Coffee BrewerI am satisfied with the purchase of the newest HT Phase Bunn Home Brewer.

CONS: You can''t be in a hurry with this maker. Ours takes a full 12 minutes starting with room temperature water. The carafe only holds 8 cups. This maker is very noisy. It boils, hisses and jiggles while brewing. Water drips out of the seams of the top if it is filled to the 8 cup level while it is heating. I tested the coffee temperature immediately after brewing by pouring coffee directly in a ceramic mug. The temperature was 172F. I was a bit surprised that it was not hotter than that if it truly brews around 200F+. I will have to due further testing and watch some control factors more closely. I hope that it registers a bit higher than that.

PROS: The automatic start helps to make up for the time of brewing if you simply can''t wait the 12 minutes for the brew cycle to begin. We prefer to grind our coffee just prior to brewing but it is nice to have the option! The thermal carafe prevents over heated, bitter coffee. I tested the coffee temperature directly after brewing and it was 172F. I tested a cup at exactly two hours later and it read 160F. I give the thermal carafe a nice hot pre-rinse and it holds it''s heat for a full two hours. I love the stainless steel brew basket. Our brew basket from our last coffee maker was plastic. It blistered causing me to have concerns about plastic leaching into our coffee. No worries about that with the Phase Brew.

Good Design

The design of this brewer was just what I was looking for: 8 cups, insulated carafe, reputable brand, full temperature (200 degrees F) brewing, and no "always-on" heating tank. After a frustrating and rather wasteful one-month break-in period, it''s operating as I originally hoped. If it weren''t for that problem, I''d give it 5 stars.

Good Support

I bought the Bunn Phase Brew HT despite problems reported by others because, apart from the Technivorm, there''s nothing else quite like it, and I had read the Bunn support is very solid. This turned out to be true.

Problem with Odor, Initially

The biggest problem was a nasty plastic smell and taste originating from the plastic tank. This was especially noticeable during the heating cycle. Eventually I ran about 20 pots of water through the thing over about three weeks, including two cleanings with vinegar and even a couple with hot bicarbonate of soda solution. At one point I called Bunn support, which was a reassuring experience. They offered to replace the brewer, no problem, but they said the smell would go away in a couple of weeks. I hung on the the brewer I had, and sure enough, in a few weeks it was making great coffee. Whether it was the passage of time that did the trick or the endless flushes with water, etc., I don''t know.

Not Wasteful of Energy

I always liked the Bunn brewers for their solid build, but I didn''t want to heat water in a reserve tank all the time, so the Phase Brew seems like a good answer.

Correct Water Temperature

The water temperature coming out of the spray emitter is about 204 degrees F, and the coffee in the pot at about 185 degrees (measured with a Fluke thermal probe). (I pre-warm the pot with hot tap water, but I don''t boil it or anything.)

Pot Stays Hot for 2 3 Hours

How hot is hot enough depends on who''s drinking the coffee, and whether they take cream (I don''t). For me, the coffee is pleasingly hot for a couple of hours; hot enough for three hours or so, and a little on the cool side after that, but still drinkable. Realistically, it''s empty before then.

The Carafe Doesn''t Drip (Much)

The carafe pours nicely until the last half cup or so. Then it takes some practice not to have it drip. I just remove the top and pour the last few ounces out.

Hot Plate Only Stays on for a Short While

Some have said that the hot plate under the pot stays on, but it seems to turn off shortly after brewing. This is good because the pot is insulated and hot plates ruin coffee.

Good Spray Head

I had read that some people had problems with the shower head emitter dribbling rather than distributing evenly in all directions. That''s not a problem with mine -the spray pattern is just right. The shower head is removable for cleaning.

The Clock Works

I haven''t had any problem with the electronics, but I don''t use the pre-set timer to start the brewing so I can''t say anything about that.

Noise isn''t a Problem for Me

The boiling water noise during warm up is about average for a drip coffee maker, and a bit louder than normal for the final couple of minutes while the water is dispensed into the coffee, but it doesn''t bother me. In fact the change in the rumble serves as a final warning that the pot needs to be in place.

Brewing Time is Fine

Brewing takes about 10 minutes. Unless you stare at the machine the whole time, it''s not noticeable. Personally, I pour in the water and hit the start button, then I grind some coffee and pre-heat the pot during the initial heating phase (when no water is coming out), so by the time I''m ready, the remaining brew time is maybe six minutes.

Filters Are Unusual, But Not Hard to Find

Bunn filters are taller than most, because it dumps the water into the coffee quickly, flooding the funnel and wetting the grounds evenly. Short filters might overflow. However, Lowes, Fry''s, and others stock them, and a pack of 1000 is only about $11 (plus shipping) from Bunn.

The Coffee is Really Good

With the hotter temperature of the Bunn, I found that using a medium grind produced smoother results than the fine grind I had previously used to get flavor with my aging Braun coffee maker. My expectation that I could save 20% of my rising coffee bill by switching from a 10-cup to an 8-cup brewer hasn''t been fulfilled though, because the coffee is so good that I often have to have another half-pot later (but at least it''s nice and fresh).

Buy BUNN HT Phase Brew 8-Cup Thermal Carafe Home Coffee Brewer Now

I was excited to see that Bunn had a new brew technique and was in the market to replace my old Mr. Coffee unit. I preordered the Bunn HT and got it on December 30, 2010. Initially, I thought that the Bunn HT made a good cup of coffee and was easy on the eyes, easy for set up, and easy for clean up. However, on January 17, 2011, my coffee maker quit heating water and I did not get my morning coffee which upset everyone in the household! I contacted Bunn and they sent me out a new unit and asked me to ship the broken one back to them. In 2 days, I received the new unit and peace was restored to the family.

Then, on February 1, the same problem occured no heating of the water!! I contacted Bunn and told them of my unhappiness and asked if they were experiencing a rash of failures. They said that they had only had a few but for one person to have 2 failures in month is completely unacceptable!

Although I like the unit, I could not recommend this to anyone as long as it continues to go belly-up in such a short amount of time. I could understand one failure, but two??????????? BTW I use filtered water for the coffee maker so it shouldn''t need cleaning in less than 2 weeks.

Not impressed with the reliability and durability of the product.

UPDATE-March 26, 2011!!

Woke up this morning after a terrible nights rest and pressed the button on my 2nd replacement machine and ............ nothing!! It indicated that it was heating the water but no heat, no gurgling, no nothing! This is the third failure that I have had with the Bunn HT Brewer and I am at my wits (what''s left of them) end. I am struggling to believe that a company like Bunn can''t build a reliable machine. Maybe I''ll just get a stove top percolator!

Read Best Reviews of BUNN HT Phase Brew 8-Cup Thermal Carafe Home Coffee Brewer Here

I wish I could kiss the people who made this coffee maker. Where do I start? Maybe with my supposedly nice Cuisinart story. Last Christmas I received a Cuisinart coffee maker with a thermal carafe. The thing was a menace from the start. The lid never closed all the way, the entire thing was plastic except for the carafe, which almost immediately started to seep water between it''s walls even though it had never been near a dishwasher or submerged in water. Plus, it always overflowed unless we pressed slow brew. To make it more annoying it screeched out five ear-shattering beeps when it was done brewing that woke us up from downstairs even with our door closed. Who needs an alarm? Not us!

After all this I was left thinking big companies don''t care about their end product as long as they sold a bazillion. By the end of this year the crappy thing was more than toast.

Now THIS coffee maker is amazing!! Bunn seems like they want to design and build something of quality. Really? Do companies still do this? First, the coffee maker is tall, nearly as tall as my stand mixer so make sure you have room. The reason is because there''s a reservoir on top for water to boil to an exact temperature before spraying down on the coffee. And the coffee filter is made of stainless steal, not plastic! I about jumped for joy when I saw that. They also fixed the too flat pour spouts everyone complained about in previous years. It has a nice dip now so coffee doesn''t splash out. Does that mean a company actually takes suggestions? (Sorry I''m feeling a bit cynical after my Cuisinart experience.)

This Bunn is solid, seriously. It''s a well-built machine that looks great in my kitchen. And the coffee? Fantastic! There is only one small thing it doesn''t have. A built in water filter. We have very hard water here, but it''s not a big deal for me to filter the water beforehand. Oh, I nearly forgot. No ear piercing beeps! In fact, no beeps at all. Just a peaceful LED sensor that turns off when my coffee is done.

Bunn you earned yourself a new loyal customer. Thank-you!

Update 16 Feb 2011: Coffee maker still looks brand new and works just as well as the day I bought it. Water is still heating properly. I do have to turn the pot upside down to get the last of the coffee out, but it doesn''t leak or drip when I do. It''s as if it was designed to be able to be tipped that way. Still the best coffee maker I''ve ever owned.

Update 01 July 2011: I found when I fill the water reservoir above the black line the water can''t boil and just leaks out cold. So now I take care to fill the water holder to just under that 8 cup line.

Want BUNN HT Phase Brew 8-Cup Thermal Carafe Home Coffee Brewer Discount?

Very disappointed. I just received the second unit and after one brew cycle it is non functioning. there is obviuosly a major design flaw with this model.

Save 13% Off

Oster BVST-EK5966 1-2/3-Liter Electric Water Kettle, Stainless Steel Save 25% Off

Oster BVST-EK5966 1-2/3-Liter Electric Water Kettle, Stainless SteelI am using this kettle for the last 30 days(Bought it from Wal-M, Sorry Amazon) and i''ve already used it about 30 times or more to make my tea(I LOVE TEA). So far no leak no problem. this kettle hold 1.70 liters which is about 57.50 Oz.

It takes 6 minutes and 45 seconds (6:45)to bring it to boil at full capacity (1.7 liters)and 4 minutes 32 seconds for 1.00 liter and at minimum recommended capacity which is half a liter(2 Cups) it take 2 minutes and 6 seconds water to boil(I start with water room temprature of 69F and 2500 feet above sea level). That it not bad. I like the idea of the body is Stainless Steel because plastic ones add Odor and chemical to the water which is not safe in my opinion(even though, this unit has some plastic part inside, Like filter or top part of the lid from inside But you can remove the filter if you want). It also has Blue LED light inside! the kettle so you can see if the unit in working or not. No cord is connected to the kettle itself so that''s make it very convenient(cordless). I also recommend, Boil water 3-5 times at full capacity to clean (remove manufaturing oil) and disinfect this unit before the first use.

I''ve heard some other ones they have " Keep warm" function so you dont have to reheat the water after 30 minutes of not using it. When you want to buy any electric kettle research about the leakage problem. since a lots of them in the market prone to leak and that can cause fire. One thing i have to mention is, I use Soft Water so when we boil water over time there are no calcium deposits are attached to the inside container and this adds to the life of any water boiler or water heater. By the way, since this unit has open wide top access, therefore is very easy to clean this kettele. In my opinion, this is a MUST HAVE in every kitchen.

Tip: By the way this item(Oster Kettle BVST-EK5966) and Sanyo model# U-K170S are the same one. So if you planning to buy this one, now you can check which one is cheaper.

I''m sure in up coming months more US manufacturer will add more feature to this type of kettle at more affordable prices, like digital control, digital display, keep warm function and so on....

Also remember to close the lid before boiling water. If you dont close the lid, It will take more time for this kettle to turn itself off.

To be honest, I would not even think of buying an Oster product because it seems the percentage of defectives are higher than some brands but this one working just fine for me.

Update: (Jan. 16, 2010): We still use this kettle everyday (now more than 5-6 times a day actually) still works great. no leak and no malfunction and the performance is as good as first day we bought it. I recommend, if you want to use it only for 1 or 2 cups, don''t fill up with water more than 0.5 liter (2 cups). If you dont do that, then you are going to pay higher electric bill for NO reason. If you need to use it again then fill some more water (since this unit it does not have keep warm feature, it does not make sense to boil more than you are going to use in than moment). And since this kettle has window to see how much water has inside, there''s no way to turn on this unit without water.(even though it has protection against dry turn on)

Update 2(April 24, 2011): By now I''ve been using this kettle for the last 18 months and Still working fantastic and we use it many, many times a day. No problem at all. Very happy with my purchase.

Update 3 (Feb. 11, 2013): Still Perfect. No bad taste, No Malfunction, No problem what so ever and i''m using it 10-12 times a day(Yes, Every single day). I own this kettle for the last 3 years and 5 months.

Cons (based on first week of usage):

Auto shutoff kicks in a bit late for my taste. My older kettle shuts off a bit earlier, but this is a personal thing.

Oily residue on the inside of the kettle. Difficult to remove, even after several rinsings with vinegar/water solution and dishwashing soap. Update: I don''t notice the residue now, although it took 5 or 6 boilings to get to that point.

Inside is NOT entirely stainless steel, as another reviewer mentioned. There is the plastic(?) water level gauge, as well as a removable plastic mounting bracket for the filter, which is itself plastic. The wonderful shiny blue light (mentioned in the other reviews) comes from a small plastic casing at the base of the kettle. There is also a steel rod connecting the cap of the kettle to the base, and there is a small rubber seal at the base of this rod. This is not a lot of plastic compared to some kettles, but it is there.

Pros:

Sturdy and straightforward to use.

Easy push-button cap that springs open and clicks shut.

Update (3/27/2011): Seems pretty durable--still going strong after a year of daily use.

The cons above seem to be common to most kettles. Also, the exterior of the kettle gets very hot, although this is normal for a kettle.

Buy Oster BVST-EK5966 1-2/3-Liter Electric Water Kettle, Stainless Steel Now

What a great gift for busy, absent-minded friends and family of all ages.

Due to many forgotten, burned-out water pots on our stove; we have tried many water kettles. We gave up because: impossible to clean the interiors; occupying too much counter space; lengthy heating periods; lids that stuck and rusted; parts, seams and materials in the water chamber affecting health and taste; and the inconvenience of the cord when pouring.

I could not believe the perfect design of this kettle: the interior is accessible for cleaning and all stainless, the cordless removable unit to carry to the table, the quick heating, large capacity, the press-button pop-up lid, non-drip pouring spout, removable filtering screen, cord storage... Oster thought of everything for safety and convenience!

But then added the LED blue light that is on so you know when it is heating! A moment of beauty! The boiling water creates blue shadows through the translucent lid and capacity window like a moving sea.

Most of all peace of mind that the pot is off!

Read Best Reviews of Oster BVST-EK5966 1-2/3-Liter Electric Water Kettle, Stainless Steel Here

This kettle is ok but not great, and different than the image shows.

Firstly, the image and description show a loop handle; and the image also shows ridges (grip) on the inside of the handle.

The actual kettle that arrived, despite having the correct model number, has a long straight handle with no ridges.

The handle is a cheap slippery plastic with a seam running down the side. The seam had a chipped piece of plastic missing along the seam (1/2 inch long), and when you squeeze the handle the seam bulges open slightly.

The handle is slippery, and I have concerns about it tilting in my hand whilst it is full of boiling water.

Pros:

The kettle looks great, shiny stainless steel and a blue light inside.

It is 2000w so heats fast

The press-open lid works well

The filter is easy to remove

Cons:

The water gauge is in liters rather than in cups/mugs, so it is hard to know how much to fill it depending on the amount of drinks you need to make.

The handle is a cheap plastic, prone to defects and different than in the image

Want Oster BVST-EK5966 1-2/3-Liter Electric Water Kettle, Stainless Steel Discount?

Returned it due to the tainted taste and smell from the plastic component, water level indicator inside. Otherwise, it was a cool looking one and functioned well.

Save 25% Off

Copco 2510-9963 Acadia Reusable To-Go Mug

Copco 2510-9963 Acadia Reusable To-Go Mug, 16-Ounce Capacity, BrownI''ve used my Copco cup DAILY now for 22 months. No kidding! How the the 1-star rated folks managed to crack their lids or that they complain about leaks is beyond logic. I don''t see how either is possible. Perhaps they microwave the lid. That would destroy the rubber seal eventually.

I''ve now used this cup EVERY single day since I bought it and I only have one complaint: the temperature drops faster than I would expect too cold to drink after 20 minutes or less. Although I''m disappointed, I continue using the cup anyway. It''s fine for your desk or a short trip to the office. Also, the cup does stain rather easy just drop an Alka-Seltzer in it and let it soak for 6 or more hours.

MSRP: $7.99

I came across this Copco cup while out shopping, looked it over and thought "wow, this is perfect for me". Although I own several costlier double-insulated stainless steel cups, they have one problem ... you can''t reheat your coffee in the microwave. This Copco cup solves that problem.

You''d think this was a Styrofoam cup until you pick it up. It''s very well made, solid & sturdy, and has a twist-on lid with a rubber seal. Surprising to learn: double-insulation! It''s top dishwasher safe although I hand-wash mine. The dark rubberized brown band makes it non-slip. It''s microwavable but I recommend: remove the lid so you don''t shorten the life of the rubber seal.

The only improvement I could suggest: Add a swiveled rubber plug for the lid hole just like what a typical to-go cup has. (stay hot longer). I highly recommend this Copco cup, sent one to my picky brother, and will buy an extra spare for myself.

Cheers,

Jeff

Pros:

microwave safe

dishwasher safe

does not have that plastic smell

good quality plastic which keeps the stuff hot but feels good in hand

Nice soft rubber grip

fits in all cup holders

Cons:

none so far

Buy Copco 2510-9963 Acadia Reusable To-Go Mug Now

I bought two of these Copco Cups. Excellent design and the seal is quite good. I never had a drinking disaster in my car.

Ok. I''ve used this five times a week with Hot Coffee brewed at home. Initially I noticed no taste of plastic or smell. Since then, about three months later, I now notice a plastic smell and a taste that has infused into the coffee. I think it is a good product, but I think a ceramic mug may be better here. I would keep the design exactly the same but use ceramic for the body and perhaps the same plastic top with the same seal. Ceramic never has any taste.

It is close, but not perfect for me.

Read Best Reviews of Copco 2510-9963 Acadia Reusable To-Go Mug Here

I just received this as an Easter gift and had to come rave about it. This is my new favorite travel mug. Like other reviewers have said, it doesn''t have a plastic smell, which is a big plus. The cap twists on tightly and has an inside rubber seal to prevent leakage. Surprisingly, even though the inside is white, it hasn''t become stained by my coffee (I''ve used it for 3 days and haven''t run through the dishwasher, just rinsed in the sink). The grip is comfortable. It keeps my coffee warm for hours and doesn''t become too hot to hold, like many other travel mugs. Plus, it is the right size to fit in a car cupholder.

I recommend this! Plus, if you buy one in pink, some of the proceeds are donated to the Breast Cancer Foundation.

Want Copco 2510-9963 Acadia Reusable To-Go Mug Discount?

I really like this mug. I have had many before, but this one is by far the best. The only thing to remember is that the brown sleve comes off and I find that I have to take it off to wash it, or it gets a mildewy smell from water just sitting underneath it. Besides that, Great cup. Oh, and it has a really good gasket system, so when the lid is on there will be no drips from the threads.

Update: I have been using a combination of 3 of these for 3 years now and still love them. They work great and are very durable. I dropped one on the lid and the lid cracked, but besides that I am very happy with the purchase and would absolutely buy them again, if I ever need to.

Brita 42633 Faucet Filtration System

Brita 42633 Faucet Filtration System, Black/Chrome
  • Unlimited, great-tasting water
  • Brita''s most advanced water filtration system
  • Tool-free set up
  • LED filter replacement indicator
  • Brita On Tap faucet filters

I may be reiterating what many of the reviewers before me have said, but I may have a few helpful points to add.

First, they should have never used plastic adapters. Kitchen faucets with internal threads are quite common and the likelihood is high that you will have to use one of the included adapters to attach the filter to that kind of faucet. The plastic threading simply can''t withstand the water pressure that will inevitably push on it when you turn the water on all the way.

It would have been very easy for them to use quality steel parts, and I''m sure most people would have been happy to even pay $5-10 more for something that will actually last. It is especially surprising that they would cut corners on a product where the real profit comes from the replacement filters rather than the original purchase. Who knows what they were thinking (or if they were thinking at all), but this product simply doesn''t work when setup correctly.

The use of plastic is not where the problems end, however, because there is literally less than a half an inch of exposed threading within the top portion of the adapter. The adapters themselves also have around a quarter inch of threading. This is really a shame, because even using a weak material like plastic might be sufficient if they had enough threads engaging to strengthen the connection.

That said, if you are set on using this product (or forced to), here are a couple of things you can do to help alleviate the problem. I''ve gotten mine to work long enough for me to order something from one of their competitors.

Turn the water pressure down on your faucet. In case you don''t know how, there are usually two levers (one hot, one cold) underneath your sink that control the water supply. Try tightening them until the water flow is slow enough that it won''t blow the filter off.

Try epoxy or a similar plastic bonding agent. I used epoxy to bond the adapter to the filter mount. You can then screw it on by holding the rotating ring in place. This is an irreversible and permanent solution, but it will make it so that there is only one point that will leak.

Another poster suggested you can contact Brita to get a metal replacement adapter. That may be a good solution. However, keep in mind that you will still have to screw the metal adapter into a short length of plastic threading. That may simply shift the weakest point to a different part of the mount.

Buy Brita 42633 Faucet Filtration System Now

I was cautious after reading the disgruntled reviewers state the Brita On Tap''s alleged weaknesses but figured it was so easy to put on and take off that worst case scenario I''d just return it. The first thing I learned is that my sink faucet has threads on the inside. This means I had to use the Brita''s included adapter. The adapter fit easily but without the washer. I could never get it on with the washer attached. This would be a problem if I had leaks or erratic water flow but so far that has not been a problem. After installing the base system to the faucet three minutes later, I was done. Now it was time for the taste test. Very good. The water didn''t have the normal bad aftertaste from normal tap water and I''m now poised to cancel my water delivery, which is costing me about 650 dollars a year and which for all I know has more impurities than the company is willing to divulge. Compared to my Brita system--30 dollars for the unit and then 60 dollars a year in filters (every 3 months you have to buy a 15 dollar filter), I''d say I''m ahead more than 500 dollars a year. Sounds like a good deal to me.

Update: I discovered I couldn''t put in the supplied washer in with the adapter because the old washer was "hiding" in the faucet. Once I took out the old washer, I was able to put on the adapter as prescribed in Brita''s instructions. I tightened firmly by hand and there are no leaks or spattering problems. For the money, a very good unit indeed.

Second Update on 1-12-10

After 3.5 years, the system finally started leaking all over the place. A $30 system that lasts that long still seems like a fair deal.

Read Best Reviews of Brita 42633 Faucet Filtration System Here

We have gone through 3 of these in 2 years. The actual water filter works great but the way it attaches to your sink will eventually fail and end up spraying you or completely falling off. The attachment parts are plastic and if the threads don''t get stripped while you put it on the first time, they will eventually wear down and then there is nothing you can do except shell out more bucks for a new one mainly just for the little plastic threaded connector. Also, the indicator light is not 100% reliable. I recall it flashing red for weeks even though we had just put a brand new filter in the holder.

Want Brita 42633 Faucet Filtration System Discount?

There are a couple of things to be aware of before you buy this.

The indicator lights are powered by a non-replaceable battery. Britta says it has a 5 year life but if it fails sooner it can''t be replaced. After that, no indicator for filter replacement.

The mounting fittings that come with the filter are cheap plastic and I couldn''t mount mine without it blowing off if the water was turned up too high. Call Britta and they will send (free) metal fittings but it takes a couple of weeks.

Britta automated phone assistance is horrific to navigate.

NYC water clogs faucet filters fast. I''ve tried a few systems and so far this one has lasted the longest. It''ll go for a month+ before it needs replacement. Not the full four months Brita claims but the other brands I tried lasted less than two weeks. I''ve had the system for 6 months.

Keurig My K-Cup 2-Pack Reusable Coffee Filter Basket Replacement

Keurig My K-Cup 2-Pack Reusable Coffee Filter Basket ReplacementSomething that is important to be aware of is that you can''t use just any ground coffee in this filter. I have a Kuerig Elite and bought a standard bag of Dunkin Donuts ground coffee and when I first tried to use it, the water going into the cup overflowed and came out of the overflow which essentially watered down the coffee considerably and had water pouring everywhere. I tried it again, this time with a little less coffee in the filter and had the same result. I contacted Kuerig customer support and they replied and told me to make sure I didn''t pack the coffee, the filter was clean, and that the grind wasn''t too fine because a fine grind would clog the filter. I cleaned the filter very carefully and even stirred the coffee grounds with the end of the spoon to ensure that it wasn''t packed. The results were the same. I haven''t tried using a different brand but I will. As for now though, the idea is great but I''m not convinced that there isn''t a possible design flaw with this. Once I try a different ground coffee I will update further.

There isn''t a K-Cup coffee pod out there that can beat grinding your own freshest coffee beans and the average cup of making your own coffee is at a fraction of the costs.

There was a person here who posted the perfect permanent method and that is to buy the replacement metal mesh filters from Keurig.com which are $9.99 for a pair.

We bought two pair for a total of 5; one came with the coffee maker. We trimmed the edge of a few of the K-Cups we got with our coffee maker for safe keeping. Trimming the edge will allow the metal mesh filter to fit perfect in the "pod" holster and screw the gray lid snugly.

We use a Food Saver and Mason Jars to store our coffee. We prepare the filters just prior to loading them each and every day and each and every evening, Cleanup is incredibly easy and reloading them equally easy.

The average cost of Paul Newman''s brand at Wal-Mart is $9.88 or $10.77 counting 9 percent tax. That''s 60 cents per cup which is simply ridiculous. I don''t deny you can find it cheaper elsewhere; my problem is I''ve yet to enjoy a fresh cup of coffee via these little devils.

We bought 6 K-Caps and they have their place too but we found the coffee weaker due to having to use less coffee than the metal mesh but come in handy in a pinch.

We''ve done our fair share of experimenting and both K-Caps and the reusable filters and give the nod to the metal filters.

For those of you who grind your own beans; we found fine-medium is the same as what are in the pre-made K-cups.

To those of you who had some really wonderful tips; thank you very, very much!

Buy Keurig My K-Cup 2-Pack Reusable Coffee Filter Basket Replacement Now

I used to drink coffee only on Sundays. Bought Starbucks maybe twice a year. Now, thanks to Keurig and K-cups, I am absolutely (and happily) addicted, drinking 3 cups a day, the stronger the better. However the My K-Cups are useless. I bought a burr coffee grinder. I tried coarse grinds, I tried fine grinds, I tried filling them halfway, I tried filling them all the way. The coffee was always terribly weak. I even emptied a K-cup and put the coffee in it into the My K-Cup. Still lousy coffee. I called Keurig and their solution was to send me two new My K-Cup filters. The new ones were no better than the old ones. Then I bought on Amazon the EZ Cup with the EZ cup filters. These work and work very well. Keurig admit that your My K-Cups are a total and abject failure and buy the company that makes the EZ Cup and EZ Cup filters. Your customers deserve better than the My K-Cup.

Read Best Reviews of Keurig My K-Cup 2-Pack Reusable Coffee Filter Basket Replacement Here

If you have a Keurig brewer then you need these extra filter baskets to please the other coffee drinkers in the morning. One works, but you don''t need to constantly wash them before brewing another cup. While there are many flavors and types of K-cups, there is none better than using your own grind.

Want Keurig My K-Cup 2-Pack Reusable Coffee Filter Basket Replacement Discount?

Each one lasts us about 6 months. There''s 2 of us and we drink 2-3 cups of coffee each day. That''s over 1000 cups of coffee per filter.

Clean filter out right after you make coffee to make them last longer. Don''t bang on the filter too hard to clean out the coffee or it can come apart. I rinse it in the sink coffee grinds and all.

We buy a giant tub of folgers and that costs $6.99. It takes us about a month to drink it. We save SO much money this way and the coffee (even Folgers) tastes great! Save your grounds and add them to your potted plants or compost, plants and flowers love them!

Trojan UV Max 602732 Quartz Sleeve

Trojan UV Max 602732 Quartz Sleeve
  • Replacement needed only in the unlikely event of sleeve breakage
  • Cleanable and reusable; simply use soap and warm water every few months
  • For optimal performance, visually inspect for cracks, leaks and loose fittings
  • UV technology is environmentally safe

For those who have a Trojan UV system to purify their water and want to have a new sleeve available for replacement when performing the yearly bulb upgrade, this item will fill the bill. The price was good and whenever I have to replace the quartz sleeve, I''m ready.

Pentek DGD-7525 Sediment Filter

Pentek DGD-7525 Sediment Filter
  • Reduces the need for multiple housing step-down filtration systems
  • Filters extra-fine dirt, sand, sediment, silt, rust particles, and scale particles effectively
  • Bacteria resistant and chemical resistant
  • 3 times the dirt-holding capacity of similar sized sediment water filters

Works well for us. We can buy it at a better price online than we would be paying our plumber, and it is master plumber approved over the store variety name brand pleated filters.

Buy Pentek DGD-7525 Sediment Filter Now

I use this filter with my whole house well pump and found it to work as good as advertised. No loss of water pressure and it has continued to work past the ideal replacement time frame.

GE Osmonics Desal TFM-100 Reverse Osmosis Membrane

GE Osmonics Desal TFM-100 Reverse Osmosis MembraneIts works great and my water tastes great. The product seems to produce the ideal amount of water for my family

This is review of "Non-Watts Premier Brand RO Membranes" like this one OR "Dow Filmtec Residential RO Membranes". While it should work as described, DO NOT USE on Watts Premier WP systems (i.e. WP-4V, WP-4, WP-5). The WP systems are the one-piece manifold systems from Watts Premier.

This does not have the built-in Check Valve or Brine Seal inside the white plastic tube of the RO Membrane. Without this Check Valve or Brine Seal, water from the reservoir tank (when full) will back flow to the RO membrane and damage it, and waste water.

This back flow or reverse flow will happen when your reservoir tank gets full. So basically, you will be wasting water as the water trickle will not stop. When I tested it, water continued to trickle out of the reject water outlet tube even when my reservoir tank is full already (it should stop when reserve tank is full). The water coming out is at a much slower rate though, but still plenty enough to raise your water bill since the water trickle will continue 24 hours a day.

Buy GE Osmonics Desal TFM-100 Reverse Osmosis Membrane Now

Seven Plate KYK Genesis Home Water Filter and Ionizer

Seven Plate KYK Genesis Home Water Filter and IonizerOrdered KYK Harmony Home Water Filter and Ionizer. Received an email that day stating the product is on back-order for two weeks. The seller Water for Life USA stated that they will upgrade the order to the KYK Genesis water ionizer for free (this system has better filtration and ionization, more features)if I wanted. I said sure, and thanks. Received the order in a couple of days. My wife and I are extremely happy with the purchase. I did approximately twenty hours of research on all the Ionizer(s) Why? They are expensive. If you look at how KYK developed the unit with the features and history and the company that marketed this product you have a win, win.

I personally have this unit and bought it from Henna Hut. Those people are awesome and it was a pleasure to do business with them. They answered all of my questions and the low price was the icing on the cake. sure prices vary on shipping, but at 1525.00 I also got free filters and installation kit. Putting it in took all of 10 minutes.

Buy Seven Plate KYK Genesis Home Water Filter and Ionizer Now

Aprilaire 600M Whole-House Humidifier

Aprilaire 600M Whole-House Humidifier With Manual Control
  • Whole House Humidifier With Manual Control
  • 24 volt Humidistat Included
  • Fresh Ideas For Indoor Air
  • Mounts On Furnace Supply Or Return Air
  • Open & Closed Damper For Summer And Winter Setting

(This review is posted for both the Aprilaire 600M and 600A units in order to contrast them and to describe their similar functions.)

The Aprilaire folks say the "important considerations in the evaluation of a humidifier are precise control, sufficient capacity, trouble-free performance and minimum maintenance." I would add cost, ease of operation, and ease of installation. My sense is that this unit gets high marks in all of these areas.

The Aprilaire 600 humidifier operates in conjunction with your heating system to add moisture to your air. It is called a bypass humidifier because some air leaving your furnace is rerouted to bypass your ventilation system and instead run through the humidifier, absorbing moisture through evaporation, before returning to your furnace and on into your home. (The bypass is accomplished as a function of the higher air pressure in the supply leaving your furnace than in the return air going into your furnace.)

Generally, a hole is cut into your supply plenum (through which heated air leaves your furnace and goes into your home) and a bypass duct is run into the humidifier, which is mounted on the return plenum (which feeds air from your home into the furnace). Within the humidifier is a pad, which holds water like a sponge. As the heated air from the supply is bypassed through the humidifier, it picks up evaporated moisture and is run back into the furnace for distribution into your home.

A hygrostat (humidifier control – set manually on the 600M and automatically on the 600A) monitors the humidity in the air and controls a valve to release (or shut off) water running through the humidifier. It is generally mounted on the return plenum from which it measures the relative humidity (RH) in your air.

Water running through is a key point here, since when the valve is open, water not only soaks the evaporating pad, but excess water runs through a hose into your drain. I don''t know how much water is simply – literally – poured down the drain, but it doesn''t feel good to watch it go. This leads to your first decision – hooking your humidifier to the hot water or the cold water supply. The hot water humidifies your house more quickly, as it is easier to evaporate, but of course the waste is much more expensive (and it''s not good for the environment to heat water only to run it down the drain).

When the hygrostat determines it is time to run the humidifier, it generally waits for the furnace to come on and send it a signal from the control board (in most modern units). However, you can also install the humidifier to run when the fan is on without the heat (you''ll need to use the hot water for this). Finally, you can install it so the hygrostat signals the fan to run so that it can humidify your dry house automatically.

Automatic v. manual control?

It is highly recommended by the manufacturer to keep the humidity low enough in your house to prevent moisture from condensing (or frosting) on your windows, which could cause rot and mildew. The condensation point is a function of the humidity in your house and the temperature of the inside surface of your windows. This is a function of the thickness of your window glass and the temperature outside.

The automatic hygrostat (600A) measures the temperature outside your home to drop the humidity when the temperature falls. However, it takes up to three days to make a significant change in your home''s humidity, and the hygrostat can''t know what the temperature is going to be over the next three days. The automatic control of the 600A is a bit more expensive, is harder to install, offers more possibilities for malfunctions, and doesn''t fully do what you want it to know the temperature in the future. Still, you''d have to have more discipline than I have to keep up with the weather forecast and run to the basement every day to manually adjust the unit. Although I chose the manual version based on the recommendations of two plumbers – one on YouTube and the one who installed my unit – I believe I would now select the automatic one.

Installation was done quickly by a professional for $240 plus $30 in supplies. I was quoted prices up to $500, so be sure to shop around. The work is simple, if you know how to do it, and most plumbers have installed many of these.

The maintenance seems simple – replace the pad annually (about $15), shut off the air bypass valve and the water valve in the spring. I suppose you should also check the water flow through the little orifices and stuff, but I imagine I''ll forget that until the system doesn''t seem to work properly.

Overall, I am very happy with this unit.

Buy Aprilaire 600M Whole-House Humidifier Now

I installed the 600M to replace a 400M hooked into my Harman PF 100 pellet furnace. The 400M just didn''t put out enough humidity. Installing the 600M was very straight forward. The wiring was easy and the humidifier starts running with the blower on the furnace. There is so much more water being pumpled into the system now and the humidity levels are much easier to adjust. This is just the manual version, which is what I needed for my pellet furnace.

Price for the unit was amazing and shipping was very quick.

Read Best Reviews of Aprilaire 600M Whole-House Humidifier Here

I wish I would have bought one of these years ago. Works great, my skin feels alot better. Plus I don''t wake up in the mornings with a dry mouth.

Want Aprilaire 600M Whole-House Humidifier Discount?

This is a pretty great humidifier. Instead of doing just one room, it will work for your whole house, which is pretty amazing. Its priced well, and it actually works. The only drawback to it, is that it is a manual controlled humidifier. It is easy to use and efficient. It also has an open and closed damper for different seasons, so it is guaranteed to get the job done. However, if you want one that is digitally controlled, there is one that is the exact name, it just operates digitally compared to manually which comes in handy a lot. It is an Aprilaire Model 400 automatic whole house drainless bypass humidifier with digital control. Its only a little bit more in price but I would reccomend the digital over the manual any day.

http://www.amazon.com/gp/product/B004PDDZRS/ref=as_li_ss_tl?ie=UTF8&camp=1789&creative=390957&creativeASIN=B004PDDZRS&linkCode=as2&tag=wwwworkoutwei-20

My wife and I can already tell there is significantly more moisture in the air.

Installation was slow only to make sure I was doing it right.

Who wants to make a mistake when cutting into the sheetmetal?

After the installation was complete the first test revealed the setting on the separate control feature could not be maxed out.

The setting had to be dropped down to a point where the water turned off when the furnance was off.

I have opened up the unit several times to make sure the air was moving over the filter and the water was cascading correctly.

I am really happy with this unit and the results I have seen and experienced.

Kick Away Shoe and Boot Cleaner

Kick Away Shoe and Boot Cleaner, Heavy Duty Commercial ModelIf you''re looking at this, you''re probably familiar with the leading brand. I think this one works way, way better. The frame is stiffer, there''s an extra brush on the bottom, the brushes are stiffer, the side brushes are farther apart so boots fit better, the tops of the frames are scrapers, and since the underside is open it doesn''t clog up, the mud falls out.

The "Kick Away" Shoe and Boot cleaner, Heavy Duty Commercial Model works fine. We have several other scrapers but needed a more robust scraping for certain weather, shoe/boot/soles, and debris combinations.

The scraper does need to be mounted as it is tall and top heavy and will tip over in use unless you have a child''s shoe in the scraper. ONE big advantage of the scraper being tall is you can slip the toe of your boot/shoe under the entire scraper but between the plywood board we have it mounted on and lift the entire scraper and board to move it around to better position it or to sweep up under it every so often. I have size 13 shoes/boots and my boots slip between the scraper and the plywood easily.

The bad is the welding on this scraper looks like it was done by a beginner and is very poorly done on the 45 degree supports on the underside. The good news is the scraper is built like a tank and will last just as long and serve just as well. The two flat metal strips that serve as feet were not level and wobbled so I had to bend the supports to get it to stand right on level cement (before the board was mounted) which caused the powder coating to come off at the welds.

The "Kick Away" label was put on with a crease/wrinkle and was crooked. I tried to straighten it and hoped to reapply it but ended up being unable to salvage it for reapplication. The "Kick Away" label was on one side of the scraper only which was nice in that you could face it either way depending on if you like the label showing or not. Both the front and the back of the scraper are identical.

It is too bad the welding on the leg supports are so poorly done. Otherwise, this is a solid American hand-crafted quality item that can be handed down for many generations.

Buy Kick Away Shoe and Boot Cleaner Now

This thing is awesome. When they say "heavy duty" they''re not kidding! The steel is THICK and strong. The brushes are rigid and stiff and do a terrific job of scrubbing the grit out of my tennis shoes before stepping onto the doormat and onto our hardwood floors. That grit is like sandpaper on our floors, particularly when it''s rainy out.

My only complaint is the screws provided for mounting the device. It *WILL* have to be mounted to use, otherwise it will tip and rock as you try to clean your shoe, and you won''t be able to get much accomplished. The screws are pretty "fat" and have a phillips head. I tried to drive the first screw into my deck using my cordless drill and stripped out the head. The next screw I put in after having drilled a pilot hole, but I still spun it before it was 100% cinched down. It would have made much more sense had they included hardened hex-head lag bolts for mounting. I ended up using lag bolts I bought at the hardware store. A template would have been helpful too, along with maybe some brief mounting instructions...

Despite the cheap-o mounting screws, lack of template or instructions, I still give this thing five stars. It''s just that good!

Read Best Reviews of Kick Away Shoe and Boot Cleaner Here

Every now and then you purchase a product that is what it says it is. As a bonus the company was more than responsive in shipping it out. This product is very well built and works like a dream! It must be screwed down to use. I used the large screws that came with it to screw it to a board so I did not have to put four large holes in my deck. I then used a couple of small deck screws to attach the board to the deck. It makes it very easy to move it around if desired. I have an outdoor wood boiler which spews soot which gets in the cleats of my shoes and then was getting tracked into the kitchen and causing my wife great consternation. I tried to wipe them on a mat but it was not effective and taking shoes on and off every time was not practical. This boot cleaner does a perfect job and we are both delighted! Thanks!

Want Kick Away Shoe and Boot Cleaner Discount?

This is without a doubt the best boot cleaner I have ever used. Its heavy duty construction really gets the dirt and grime off of your boots. The side brushes get off the mud that creeps up the side of your boots.

BISSELL Steam Mop Deluxe Hard Floor Cleaner Save 34% Off

BISSELL Steam Mop Deluxe Hard Floor Cleaner, 31N1After hearing wonderful things about steam mops from my friends, I starting doing research on them. I was anxious to retire my Swiffer which, as a mop, was better than nothing, but it left my dark hardwood floors streaky and I felt like I was just pushing the dirt around on the ceramic tile in my kitchen. I borrowed my neighbor''s Shark and after using it one time knew that I wanted a different mop. I was excited to see this new model from Bissell as I had narrowed it down to a Bissell or the Eureka Enviro-Steam. so I decided on the Bissell. The Bissell 31N1 was easy to put together, and includes a hanger so that you can hang your steam mop for storage. I used distilled water since it is supposed to prolong the life of the filter it comes with. The pads are substantial and easy to attach and stay in place while mopping. The unit took a little while to warm up but has an indicator light to tell you when it is ready. In use I saw hot steam pouring out which was great. The floors stayed wet for a while after use, but just like what happens when you mop a floor. I think I was trigger happy so I probably won''t hit the steam button as much next time and try to spread the steam around a little bit better. I did dry the hardwoods after I used it as a precaution and that was fine. I was disappointed to see my hardwood floors were still streaking but a neighbor told me that once all of the other floor cleaners come off the floor (after I continue to use my steam mop), the streaks will go away. I hope so. A cleaning person I used sprayed furniture polish on the hardwoods (argh!) so it might be a while. I still think the floors are wonderfully clean and the mop is easy to swivel around and use with the cord being a nice length. I didn''t have water leak on the floor like the other reviewer but perhaps that is because I removed the water tank immediately after use not sure. I think you would be happy with this mop. I clean up after a 2 and 4 year old so life is good now.

I feel the need to write this review because of all the crazy reviews I read while trying to decide if I wanted a steam mop, and which kind. I always seek reviews in a variety of places when I''m considering a new purchase, and this is the ONLY product I have ever been so confused about. The reviews are insane! They seem mostly to be written by people with muddy feet, 6 dogs, and they mop twice a day. Those same people also seem to want to feel comfortable serving dinner directly off the floor. That is NOT me. I keep a tidy home; I have 2 little girls, no pets; I mop when necessary (I''ll go 2 or 3 weeks if I can get away with it); and we typically dine at the table.

So, here is my review: The Bissell Deluxe Steam Mop works great. I love that I do not have to deal with dirty mop water and measuring chemicals. The cord seems plenty long enough, and my rooms are large and extra large. It takes a few seconds to warm up, and a few more seconds to get the steam to the mop head...which is perfectly fine with me. It gets my floor lightly wet, less than my traditional mop because I was never patient enough to ring it out thoroughly. If I come across yucky-dried-on-the-floor food, I hold the steam mop over it for a few seconds (no more than 15), run it back and forth a few times over the area, and the floor is clean. I don''t hold the steam button down the entire time I clean, but off and on as necessary. The longer you hold it, the more water it uses. So, depending on the type of cleaner you are, and the type of junk on your floor, the water may need to be refilled. My steam mop came with two washable pads that are easy to put on, pull off, and throw in the washing machine. So, basically, in my opinion, the steam mop that I bought at Target (on sale for $89 and their promotion gave me a gift card of $20 with the purchase) a few weeks ago is MUCH better than a traditional mop.

Other things to note:

-Get one with a removable water tank so that it''s easy to fill.

-I''m sure all of the Steam Mops work just fine. Unless you expect a miracle, of course. It''s just a mop. It''s still work. Just find one that suits your tastes and price range.

-My one year old is allergic to milk and peanuts, and that is why I looked into a steam mop. She''s also the child guilty of causing carrots, peas, and greenbeans to dry like concrete on the tile floor.

-I would have given the Bissell Deluxe Steam Mop 5 Stars IF it was a robot and all I had to do was push a button. But the mopping robots are too expensive and have horrible reviews. Again, this steam mop works great.

-My home has hardwood floors and ceramic tile floors.

-I like that the steam mop head turns and bends to fit under and around ANYTHING. Impressive.

-I probably could eat off my floors in the few seconds after steam mopping. I still wouldn''t. And I don''t require that from my mop.

Just a note: I have a iRobot Roomba vacuuming robot. I can''t imagine life without it. It does require emptying the bin and cleaning off the rollers after almost every use, but it works AMAZING and saves a ton of time and effort with cleaning. I run it several times a week.

Buy BISSELL Steam Mop Deluxe Hard Floor Cleaner Now

Well I bought one of these from ABCVACUUM in Austin Tx yesterday for 89.95. I got it today.

I couldn''t wait to try it out. Anything that looks this good on TV usually isn''t.

First some facts. I''m a guy and I''m 65 and a widower. It''s me and the dogs and the linoleum floor in my kitchen is about 50+ years old and the old spoonge wet mop just wasn''t cuttin it.

Well, I put this thing together and plugged it in. It doesn''t have an on/off switch. You wait for the red light to come on which doesn''t take long and then pull the trigger and start mopping.

The first thing I noticed was it was hard to push on the old floor, but since I lift weights I decided this was just a new form of exercise that I could get something out of besides muscle tone. The next thing I noticed was the dirt came off the floor. It didn''t take me very long and the kitchen was done and next time it should be even quicker since it''s much cleaner now.

If you are slight and weak you''re not gonna like this on the kind of floor that I have because it''s hard to push around. It may work easier on a wood floor.

Second they give you enough liquid for two uses and then you need to get your own. I have really hard water so I''m skipping the tap water and going with distilled water from the start otherwise I think I would be buying a lot of filtration systems.

I''ve got a closet full of Dust Devils and other stuff that doesn''t work but this thing works good. Now if it will just last.

This review is for the Model 31N1 series.

Read Best Reviews of BISSELL Steam Mop Deluxe Hard Floor Cleaner Here

I just purchased the Bissell Steam Mop Deluxe today and couldn''t wait to get home to try it out. I vacuumed first, then put it together (pretty easy!). I decided to try out the eucalyptus distilled water that came with it. I was surprised to see that this is the water you use INSTEAD of tap water -not as an additive. It has a nice but very faint smell, and I really wouldn''t waste money buying more when this is gone.

The unit took several minutes to get the water/steam to the mop head for the first time. I think there is only one tiny hole on the bottom of the head where the steam comes out, but after a few pulls of the trigger on the handle, the mop pad gets plenty wet. In fact, I would say that you should only pull the steam trigger when you want more wetness or when you have a particularly tough spot to get off the floor. If you keep the trigger pulled continually for steam, your floors are going to get quite wet.

My floors did get pretty wet anyway -I will try calling for less steam next time and see if the floors will dry faster that way. I didn''t see any streaking while the floors were wet, but after they dried there was a bit. No more than with a mop though. I liked the fact that I knew my floors didn''t have any cleaner residue after they were dry but they really didn''t feel any different than when I use my old mop.

The thing I like least about this steam mop is that after you''re done and you take off the mop pad (nice pads, by the way), you need to stand the mop on a folded towel or something because water continues to slowly leak out of the mop head. You surely don''t want to leave the mop standing even for a few minutes on any kind of wood floor or you will have water stains.

When I read back on this review, it sounds like I''m not crazy about this mop. In reality, I''m not sure. I think there is probably a little bit of a learning curve here, and I believe that after I have used it a few more times I will learn how not to get the floor so wet and how to store it quickly without leaving a puddle. As for the specifics of the mop, the cord was plenty long enough for me -20 ft. The head swivels but it''s not like driving a race car, if you know what I mean. It''s not small and maneuverable enough to get all the way behind my toilet. Two mop head pads are included and they are very nice and machine washable. The unit feels sturdy enough to last a long time. With this deluxe unit there is also a "glider" type tray that you can put over the mop pad and "refresh" your carpets or rugs. I don''t know how this refreshes anything. It is going to make your rug damp and unless your carpets are already really clean, it seems to me that it will just make it smell. I haven''t used this attachment though, so maybe I''m wrong.

I have only used this on ceramic tile floors -not wood or Pergo type floors. I think it would be too wet for my wood floors, which just have a satin finish.

In conclusion, I don''t know if this steam mop it cleans any better than a regular mop, but it''s more fun and maybe faster. No emptying buckets of mop water, which is nice! It''s a lot to pay for what is essentially not much more than just a wet mop (although the water that makes it wet is hot!), but maybe I''ll mop more which will help make it worth the price.

UPDATE: It is now August 2012, and I''m still using my Bissell steam mop. I may not use it as much as some people since I only have my husband and myself at home to dirty things up, but it still works fine. I have wondered the last couple times I mopped if I was getting less steam than I used to. I think so, but it is enough to get the job done, although I still don''t think it gets your floors any cleaner than a regular mop. The mop head covers have held up well, and I just throw them in the wash occasionally or else rinse them out by hand just before I use the mop. I think it works best if you dampen the mop head covers first before using them anyway. I never notice water leaking from the mop head when I''m finished anymore. I just remove the cover and stand it up against a wall (on tiled floor) when I''m done until it is fully cool. I also make sure I empty the water reservoir after each use.

Want BISSELL Steam Mop Deluxe Hard Floor Cleaner Discount?

Just recently purchased a Bissell 3 in 1 steam mop after much research. I had a Shark steam mop for the last couple of years which I loved but wanted something I didn''t have to pump for steam and a sturdier build. Out of the box the Bissell is a beauty and everything I wanted in a steam mop. Very sturdy and well built. The cord seemed a bit heavier than it needed to be for a 1500 watt, same as my Shark. The cord is also two feet shorter than the Shark''s 20'' cord. I couldn''t wait to start! Then disappointment seeped in. The little bit of steam coming from the Bissell didn''t seem like it could possibly clean my floors but I have to say it maneuvered nicely and fit under all the cabinets. I started on the hard linoleum floors and then made my way downstairs to the tile floors.

Just like so many of the reviews I had read I noticed the floors were way to wet but went in choosing to ignore what many reviews had complained about. I was willing to wait for floors to dry.

As my floors were drying the streaking and spotting started to appear. Not to noticeable on the linoleum floors but as the tiled floors dried they looked dirtier than before I had mopped them and they didn''t feel clean like when I used my Shark. Then the ultimate disappointment. I took the pad off the mop and even though it was soaking wet it wasn''t very dirty. As a rule when I''m done mopping the pad is quite dark. Dismayed I got out my Shark and went over the floors again. I noticed that the steam was so much more than the Bissell which in turn left minimal water on the floor and the drying time was 5-7 minutes compared to the 20 plus with the Bissell. Now for the last but most important test. I took the pad off the Shark and yes my floors really had been

dirty. It was all there on the bottom of the Shark pad. I realized then that the Bissell just doesn''t put out the steam needed to clean my floors and even though I loved the looks of the Bissell I really need a mop that will clean. I would give the Bissell three stars but only for the build of the mop. If I graded the Bissell on the way it worked there would be no stars because it just doesn''t work which in my opinion is rather unfortunate.

Save 34% Off

Haan MS-30 Multi-Purpose Steam Cleaner Save 24% Off

Haan MS-30 Multi-Purpose Steam CleanerI have had my eye on the Ladybug steamer for months now, drooling over all it could do but it was far out of my price range. I own the Envirosteamer steam floor mop and love it, but I wanted something to get into tight spaces like around the toilet, in the tub, the oven, etc. With some Santa money I got more serious about purchasing a canister steamer in addition to my floor steamer and began some comparative testing and studying. Fortunately, I live in a neighborhood that is all "green built certified" which means, in order to have a green rating, all homes were built with no carpet and lots of people hate chemicals which means it''s a neighborhood full of steam mops which makes comparing the models quite easy. That''s a good thing because it just saved me over a thousand bucks because I wound up no longer wanting the Ladybug. Here''s how they rate...you decide which is best for you:

These are the canister mops I compared:

Vapamore MR-100

Ladybug XL-2300

Haan Canister

Reliable Enviromate

V=Vapamore

L=Ladybug

H=Haan

R=Reliable

NUMBER OF STEAM JETS SPITTING OUT HOT STEAM:

V-10

L-8

H-12

R-5

WATER PRESSURE CONTEST; (1st place being shoots steam the hardest)

V2nd PLACE

L-1ST PLACE:

H3rd PLACE:

R4th PLACE:

CORD LENGTH: (so you don''t have to stop, unplug, water cools some, replug in)

V-18 feet

L-15 ft

H-18 feet

R-8 feet

recap: An 8'' cord is INSANE. I couldn''t even get across my kitchen counter or walk around my bed to steam all of the mattress without using an extension cord!

STEAM TEMPERATURE

V-256 degrees

L-297 degrees

H-212 degrees

R-218 degrees

Note: These temperatures are based upon using the small hose attachments. In every case that we used the long hose attachment included to turn these into a floor mop, the steam had to travel down the long hose so it cooled and wound up only being about 115 degrees by the time it reached the floor. Which results in very poor cleaning. Because of this, if you are wanting this mostly for floor steaming, I would suggest going with a steamer that shoots out hot steam directly onto the floor from its tank rather than through a long hose before reaching the floor as a canister mop does.

TIME TO HEAT UP:

V-10 min

L-8 min

H-3 min

R-5 min

WATER TANK:

V-1.6 liters

L-1.8+1.5 quarts

H-20 oz

R 2 liters

CLEANING:

For a controlled cleaning test, I mixed Dr. Pepper with sugar and spread it evenly across a 4'' length of my stained concrete floor and kept the pets away until it dried completely in a gunky mess. I then tested each mop against it in lengthwise strips, moving them at the same pace after a full heat up, as well as testing each on its own strip of bathroom tile & grout. Here''s who performed the best:

Tie: Ladybug and Vapamore. These, due to the really hot temps, loosened the gunk on impact and made it VERY easy to clean my floor. Their hot temps and heavier steam also cleaned tile the best but Vapamore actually did a BETTER job on uneven surfaces like tile with grout..but don''t expect shiny white grout because it wasn''t exactly returned to looking brand new either.

2nd place:Haan...but it wasn''t nearly as good as the above two.

Last place: Reliable. Although the steam temp is hotter than the Haan, it doesn''t shoot out as strong and only had 5 steam jets so this diminished its effectiveness Didn''t come close to the V or L.

All were at temps to kill bacteria and sanitize without using chemicals such as counters and mattresses, unless you tried to turn it into a floor mop which I don''t suggest because the steam was too cool to clean as well as a real floor steam mop made for that purpose..

Other notes: The ladybug was the most awkward to carry. It just wasn''t made for carrying up stairs, etc.

Conclusion: Considering the Ladybug is over a thousand dollars more than any of the other mops, this was a real eye opener! I tested these with my friends and we all agreed, hands down, that the Vapamore was the best buy. And I love it! It cleaned the best BUT the Ladybug lasted much longer as far as cleaning time. However, Vapamore cleaned for 50 minutes prior to needing a refill which, for me, is all I need. That said, if you want to use this commercially and don''t want to have to take time to refill, the Ladybug may be worth the steep price for you. Considering they have the same 3 year warranty though, I''d rather buy 4 Vapamores for the price of one Ladybug and have one in every room. I kid. The Reliable seemed to lack things that were just silly...like having a cord longer than my blow dryer and only having 5 steam jets.

My bamboo and travertine floors get a lot of foot and paw traffic. I bought the machine with a little skepticism since the floor isn''t clean unless I hand scrub it (the idea of swiffer grosses me out). I was amazed at the job this machine does and oh so happy with the labor and time-saving advantage in using it. I tested it on the walls, and viola! Nice job. I didn''t need cleaners, which is a big plus as I am trying hard to do my part in environmental mending.

Look forward to trying it on tiny tiny glass tiles surrounding my master suite bath. The only downfall is the cord length, but an extension cord remedied that.

Buy Haan MS-30 Multi-Purpose Steam Cleaner Now

I rec''d my Haan Steam Cleaner on Friday and I cleaned everything in sight! I cleaned my tile shower, my hardwood floors, my tile floors, my area rugs, my windows, my bed (yep), my countertops, inside my refrigerator...my pets and husband kept away in fear I would steam clean them! I used every attachment, every pad and I loved everything about it. My house sparkles and smells heavenly without any harsh cleaners. I cannot recommend more highly.

Read Best Reviews of Haan MS-30 Multi-Purpose Steam Cleaner Here

I researched tons of steam mops before purchasing the Haan MS-30. After evaluating my needs, I decided that I wanted a multi-purpose cleaner. A separate steam mop and handheld steamer would take up too much room. I chose the Haan because it had relatively good reviews, but mostly because it is German-made and in my experience, that has meant high quality.

The first thing I noticed when I opened the package was how sturdy it seemed. My best friend has let me use her Shark Vac Then Steam mop, which I liked, but it was not nearly as well-built as this one seems. It has a ton of attachments, which all seem to work pretty well.

The bathroom: Cleaned the floors great, they felt sanitized. It also got this ring that I had on the linoleum around the toilet. I wasn''t able to get it off mopping it. Granted, I did not get on my hands and knees to do it either. The squeegie attachment cleaned my mirror great and did a pretty great job on my glass shower door. I did have to stop mid-cleaning to refill the machine, but I was doing some pretty thorough cleaning, probably wouldn''t happen for maintenance cleaning. I steamed the toilet and it worked well for that. I have to admit that I don''t have water rings because prior to this, I used professional strength toilet bowl cleaner. Yes, I know, icky chemicals. I didn''t see much of a difference in the tile in the bathroom. We have subway tiles with white grout. It did wonders for the crease between the backsplash and counter. I got all kinds of crud out that I couldn''t remove with q-tips and soft scrub. Overall, I liked it for the bathroom because it felt sanitary without having to use the harsh chemicals that I normally use.

The Living Room: Great on windows. I thought I would be sneaky and use it to clean my walls...BAD IDEA. It smudged some of the paint, but that''s fine because I really didn''t like the color anyway. I had some carpet stains from where my dog chewed his bone. Mind you, we only had this dog for two weeks. The steamer and some hand scrubbing did nothing to remove it. Overall, okay for living room cleaning, didn''t really shine.

The Kitchen: This is where the Haan MS-30 shined. I have a glass-top stove that has a rubber seal around it. I have scrubbed and tried everything to get the little particles out of there, but everything seemed to push it deeper. I can happily say that this cleaned the stove to new. It blew out all of that crap like it was nothing. It did wonders cleaning the knobs and underneath them and all of the build on grease around the edges. It''s like I have a brand new stove/oven. The same thing with my dishwasher, it was amazing. The Haan did a decent job on my finished wood floors. They certainly felt clean, but later I found a place where it started to pull up the refinisher that I put on it a week ago. The angled-tip attachment cleaned between the floors and baseboards like magic...a place where I have hand-scrubbed before with no avail. It It finally cleaned the hand prints off the fridge handles that would not come off with a magic eraser or comet. My Kitchenaid mixer is now sparkling again (It is 15-years old). Overall, amazing for kitchens.

I spent about four hours doing what I mentioned above, but I suspect that it won''t be as long for maintenance cleaning.

Pros: Wide selection of attachments for every job. Great at cleaning crevices and appliances. Great for sanitizing. Decent floor cleaner. The squeeze handle lets you turn off the steam. The machine rolls very smoothly on hard floor.

Cons: The door to the storage for the cord is a little flimsy, but it is nice to be able to store the cord in the machine. The unit has to frequently pause to reboil water. You have to let it cool for about 15-20 minutes before the safety cap will come off to refill. You can''t adjust the heat of the steam.

Want Haan MS-30 Multi-Purpose Steam Cleaner Discount?

I am happy with this steam cleaner. It arrived in perfect condition and seems sturdy. I like the way attachments are stored inside the unit. I was impressed by the way the shortened wand and a pointy attachment melted grime on my tiles and grout. I wouldn''t use it on a really filthy floor without damp mopping first. The pad would get dirty too quickly.

Save 24% Off