Carpet Rake
Lasko 1128 9-Gallon Evaporative Recirculating Humidifier Save 20% Off
Mine is so accurate that it is almost perfectly synchronized to furnace operation. Furnace comes on and shortly thereafter the Lasko humidifier starts up. Furnace shuts off and shortly thereafter the humidifier shuts off. I presume the same accuracy is maintained in this newer white model.
These do use disposable paper filters. I use 2 per season. Cheapest source for the filters is direct from Lasko. I bought a box of 10 for $50 right after I bought the humidifier and I''ve got about 5 filters left. Even if you throw away about half of them, you''ll save money compared to single filter prices at brick and mortar stores. The shipping was free at the time. Maybe it still is.
Humidifiers require periodic maintenance. These Lasko''s are no exception. Each year, I sit the thing in the bathtub and fill it''s reservoir with vinegar/water and let it run about 30 minutes. This dissolves or loosens the mineral deposits. After rinsing, I then fill it with a bleach/water solution and let it run about 30 minutes to kill mold spores and dormant bacteria.
That yearly demineralizing/disinfecting is somewhat of a chore but I only have to do it once. That''s enough to get me through the entire heating season.
All humidifiers require some maintenance--even the ones connected directly to your furnace. I''ve read operator''s manuals for most every one of the furnace mounted units and some of the maintenance procedures are complex and labor intensive compared to the little bathtub routine I''ve developed for this Lasko.
When I think I will install a furnace mounted unit I search the internet and read the reviews and realize why I put up with this Lasko cleaning routine. Many of those furnace mounted units require demineralizing and disinfecting just like the Lasko--except that I can put the Lasko in a bathtub and keep the mess contained. If I had to rinse and clean a furnace mounted unit, I''d have to use a wet/dry vac to sop up the spillage all over the basement floor, I''m sure. On top of that mess, it seems that furnace mounted units die at an early age due to mineral deposits that can''t be controlled.
When the temperatures drop to about 15°F or below, our furnace runs a lot. The more the furnace runs the more the Lasko humidifier runs. I''m sure I have to fill the removeable reservoir 3 times a day or more. It seems to be sized so that a full reservoir lasts about 8 hours. That''s enough to get a full night''s sleep. Actually, the removeable reservoir holds about 8 hours worth. There''s another several gallons in the base to supply the unit with water so you can easily stretch it to 12-14 hours between fillings. I do it all the time. It''s just that if you stretch it to 12 hours or more, you''ll have to fill the removable reservoir 1.5 times to completely "fill ''er up" again.
All in all, I don''t think I could live without a humidifier. We feel warmer, the children cough less while sleeping, there''s no static electric sparks when we touch objects or each other ... it''s worth the hassle, I think.
This unit says it will do a 3200 square foot home. I guess that''s so, but, it''s quite nicely sized for homes smaller than that because it won''t have to run on high to do the job. Buying the biggest humidifier means you can run the fan on low so it''s as quiet as possible.
Once a year I also take it apart to clean the dust from the fan blades and the vortex shroud. This isn''t absolutely necessary but it makes it look new again. About 6 or 8 screws removed lets the thing come almost entirely apart for cleaning.
So, a humidifier takes some work no matter what type you get. For a household humidifier, I like this Lasko but I''ve also got a wife and kids to share in the task of refilling it 3 times a day.
I''m a home handy man so I''ll be able to replace the motor in this thing when it goes bad. I don''t think it will cost much.
Lasko sells parts and that''s what I truly love! Unlike other companies, Lasko actually has parts available and they sell them at reasonable prices.
We use Lasko ventilation fans year round as a sleep aide to produce "white noise." I''ve got a remote controlled fan that I''ve come to depend on. After about 4 years of daily night time use, I needed a motor for it last year and, sure enough, Lasko sold one to me and the cost was about 1/3rd that of a new fan.
For the home do-it-yourselfer types, Lasko is the only way to go because they sell parts. Other companies, like Holmes, don''t stock any parts at all. Once the complete Holmes unit comes from Taiwan or Sri Lanka to your store''s shelf, that''s it--you can''t get a part even if it was missing from the package before you bought it.
Lasko has a respectable warranty and they don''t charge a fee. Holmes and other companies like them charge you a fee that they call "handling" just to get a warranty remedy. That "handling" fee is usually 2/3 or more the cost of a new fan. In other words, you have to pay to return the defective item to Holmes, you also have to pay that "handling fee", and then they might send you a replacement. Lasko doesn''t do that. I think that they do require that you ship the item back to them at your cost.
This is a recirculating type of humidifier so it doesn''t throw white dust all over everything. The other type of humidifier uses heat to evaporate water (like a distiller) and in the process, all of the minerals of the water become airborne grey-white dust. I don''t like that idea. These recirculating types just trickle large quantities of water through a paper filter. The filter retains the minerals.
I remember as a kid, about 45 years ago, I used to sit on my grandmother''s floor and enjoy the breeze from a "ottoman" style fan and it had the name "Lasko" on it. I used to think it had something to do with Alaska. I presume it''s the same company--still making fans and things that circulate air. Our house is so well insulated that the furnace doesn''t run often enough for a furnace-mounted humidifier to work well in our 255 s.f. house. As a result we''ve tried a number of different kinds of portable humidifiers.
The ultrasonics don''t put out enough volume. Nor do the spray mist ones. The warm mist ones have a very high operating cost. For a couple of years we used a wick-and-fan humidifier that had plenty of capacity and ran quietly. The problem was that the wicking filters were expensive ($16 each) and rapidly lost their capacity: a filter that would wick 5 gallons a day was down to 1 gallon a day within two weeks. So even this solution cost us almost $1/day for filter replacements.
The Lasko Recirculating Humidifier seems to have solved this problem: instead of water being wicked up by the filter, the filter is wetted from the top by a little built-in aquarium pump much in the way that furnace-mounted humidifiers work.
We''ve been using this humdifier for three weeks now. It is slightly noisier (even on its lowest setting) than our old one; but the noise is not objectionable, and the volume of water being put out has not decreased at all.
I can''t speak for the longevity of the product, but its operating costs should be very low, and its technology is exactly what I''ve been looking for for years.
Buy Lasko 1128 9-Gallon Evaporative Recirculating Humidifier Now
This is my second one of these. The first one performed well but quit working after 3 years. It was inexpensive so I bought another one. I bought a cheaper model this time that didn''t have the LED displays the first one had. This one just has a knob with no readout of setting or room humidity. The reason I did that was the LEDs on the first one quit working after about two years. I figured this simpler one would be less likely to fail who knows?I keep it in the master bathroom and fill it twice a day from the tub. It uses a lot of water which is what I want it to do, but without the convenience of the adjacent tub it would be a pain all these portable ones probably have this problem.
I keep it on the medium fan setting and it seems fairly loud for the first few days but now I''m used to it and I don''t notice it coming on and off.
The area around the unit remains dry so it works well as an evaporative humidifier which is what you want it to do. It puts moisture into the the air, not the floor. I keep it on a bath mat to catch the drops that result from the filling operation.
My bedroom ceiling and wall joints have quit coming apart in the wintertime like they did before I added this humidifier so it does the job well.
Read Best Reviews of Lasko 1128 9-Gallon Evaporative Recirculating Humidifier Here
For some reason I find many of the 1-star reviews of this product frustrating...almost all of them can/should be attributed to human error and not defects in the device itself.Yes, if you hold the jug by the one handle water can leak from the valve at the end. Guess what? It has two handles. Use the one at the other end and it doesn''t leak at all....use the top handle only when loading the thing into the unit itself.
Yes the little pictograph at the far end says you press the little spring-loaded lever to fill it at the tap. But the entire lid also unscrews to fill using a larger source (like a bathtub).
If you can fill a glass with tap water and not smell the nastiness within, great. Fill that glass then let the water evaporate from it completely. Repeat. Eventually that glass will smell (and look) REALLY bad from the contaminates left behind by the water. This is the process your humidifier goes through daily on a large scale. This is why they have filters. The nastier your water is, the more you have to change filters and clean the unit; and if your water smells, then there''s absolutely nothing ANY humidifier can do to help you with that problem. If the water rings your toilet or sink drains, you''re going to have problems with any device that is built to evaporate water.
Is it noisy? It can be; it has a big fan that runs to pull the moisture through the filter. It also has 3 speeds and the lowest isn''t objectionable. It also has a humidistat so it will run automatically. No, it doesn''t have a digital gauge and a build in hydrometer, so you will have to buy a hydrometer ($3, walmart) and play it by ear; here''s a hint: Crank it to the max; watch the gauge over the course of a day. Dial back a bit. Repeat until desired humidity level is reached. Why is this is a difficult procedure?
If you find that your humidifier isn''t humidifying your house like you would like it to, instead of spending 10 minutes writing a review on Amazon bashing the unit, spend 5 minutes googling for "humidifier placement" and discovering that placing the unit near a cold-air return will allow it to humidify the entire house instead of just the room its in.
Its built from plastic, not solid oak, so yeah, you don''t want kids playing near it; but there''s a lot of things in my house susceptible to damage from small children. This thing is the least of my worries.
I''ve had this unit for 2 weeks. Its not flawless, but i don''t think its deserving of some of the criticism being delivered here. There''s no such thing as a device that''s immune to operator error. The only thing these people should really be faulting Lasko for is not being able to read their minds or providing a user manual that''s 200 pages thick (which then nobody would read and Lasko would go out of business trying to print).
Want Lasko 1128 9-Gallon Evaporative Recirculating Humidifier Discount?
I''ve only had this for one week, and I came very close to sending it back because of the noise. It is effective in putting water into the air, but the fan is really loud. There are three fan settings, and it''s reasonably quiet at the lowest setting and you can have a normal conversation when near it. At the middle setting I have to raise my voice, and at the high speed I would have to start yelling. At the lowest fan setting, it puts about 2.5 3 gallons of water into the air per day, or about 1/3rd of it''s rated capacity. I''ve decided that 3 gallons per day into the air is enough to be a benefit and I will keep this unit. I plan on only using the lowest fan speed and I leave it in a room where I don''t spend much time.As another reviewer pointed out, humidifiers are rated in gallons per day of water into the air. The rating has nothing to do with the size of the water storage. This Lasko is rated for 9 gallons per day (using the high fan speed), but storage capacity is 3 gallons plus 1.5 gallons for the refill jug, for 4.5 gallons total. I like the fact that I can have this running continuously while filling up the jug. Since I only run this on low, I only have to fill it once a day, which is great.
There are some design problems with this humidifier. First, the housing is made of flimsy plastic, and seems like it could break easily. This flimsy plastic also forms the mount for the fan and fan housing. The fan on my unit was not centered within the housing, and the fan blades were extremely close to the housing on one side. With the fan on high and sometimes medium speed, the fan blades would hit the housing and make a terrible racket. I was able to loosen the 4 screws that hold the fan and slightly reposition the fan so that no longer happens at any speed. From the other reviews, it seems like a common problem with this model. My comments on the noise above are for the sound level AFTER fixing the mounting problem.
The other design issue I have is with the refill jug. There is a recessed/retractable handle (good), but the shape of the top is rounded, so it will not stand upright on its top. Since the jug is refilled from the bottom, it would be nice if it stood upright. If the handle is retracted, it will stand lopsided on its top however, so this is just a minor annoyance. There is a valve on the bottom of the jug that is only opened when installed in the unit, and when depressed manually while refilling. This spring loaded valve is just plastic mating with plastic, and is not water tight. So if you carry the jug right side up by the handle, water will leak out the valve. It''s not too hard to carry the jug upside down since there is a handle on the bottom too. I just refill and carry upside down, and then turn it right side up while over the reservoir of the unit; it still spills some water if I''m not careful, but it''s acceptable.
There is a little plastic window in the side of the unit that has water trickling down when the fan/pump is on. This is to tell if the water is flowing, and it also makes a pleasant sound; can only hear it with fan low and even then the fan sound dominates. Nice little feature though.
The controls on top are for fan speed (1, 2, 3 and off), plus a humidity level. It shuts off when the humidity reaches the set level, and turns back on when it falls below that level. There is a green led that lights up when the humidity level is met. I tested to make sure this works, but living in dry Colorado, I expect it to be on all the time.
Mine came with 4 casters to make it easier to slide around. They work fine, but I had to press so hard to install one of them that the receptacle (flimsy plastic) cracked slightly.
Klimaire 18,000 Btu 17 SEER Save 19% Off
First the positive I gave it 5 stars for functionality. There are a couple of "cons" below but I''m so thrilled by how it works, the pros (for me) totally outweigh them.
I love this unit, did I say that??. While I may be the butt of a few jokes in the neighborhood... it is AWESOME to have air conditioning in the garage!! This weekend it was in the 90s and humid and my garage was, get this -68 degrees!! I wont run it down to 68 normally but I wanted to see if it could do it.. and it was no problem. Yesterday my wife was doing yard work and opened the garage door several times. I was amazed! Once the temp gets near the target setting, the unit backs off to a (very) quiet level just maintaining. The wife opens the big door to get the mower and for 4-5 minutes the door is open. When she leaves, I notice the Klimaire automatically kick it up to make it up. I was working in the middle of my garage and while I obviously felt the heat encroaching when the door was opened, because of the automatic speed increase, I could also feel the cold air blowing from the back and it never got uncomfortable in the middle of the garage. Once the door was closed it only took a few minutes to recover.
Now the "cons" (or at least warnings)...
These may be a bigger deal to some than they were for me. After researching it, none of this surprised me. And considering the money saved going this route vs buying a marked-up unit from an AC dealer/installer was worth the risk to me.
1. The Mini-Split Warranty Myth
After looking at a lot of product literature, poking around HVAC contractor forums, etc... one thing I have taken away is this: Though all the mini-split systems on Amazon and Ebay are promoted as "simple to install" and within the scope of an experienced do-it-yourselfer [which I agree with], the fine print clearly states that if you do, you will likely void the warranty. Most warranties require that the installation be done by "certified" HVAC technician. The supposed work-around to this is to do all the installation grunt work yourself (hang the inside unit, cut the holes, run the lineset, etc), then call your neighborhood AC guy to come out and hook stuff up, leak test, evacuate the lines, then VOILA!.. you are in business for a couple hundred bucks with a full warranty!.. NOPE... Every warranty fine print I''ve read (including this Klimaire) wants you to register the warranty with the particulars of the installation tech/company who will then be responsible for performing any warranty repairs down the road. Good luck finding any decent HVAC firm that will do that, they won''t. It doesn''t mean that you can''t find an HVAC tech to do the check-out and evacuation as a side job, and I recommend that. But your not likely to find one to sign up for being responsible for the warranty when they don''t supply the system and get the mark-up they are legitimately entitled to. So, resign yourself up front to no warranty or buy from a dealer/installer. You''ll have to decide for yourself if it''s worth the risk.
2. The DIY Installation
Again, after much surfing and reading I decided to tackle the installation myself. It seemed to me to be within the grasp of most competent do-it-yourselfers. Mine was pretty straightforward with only a 4inch frame and siding wall separating the two parts. I only used a 16ft line-set and frankly I wish it had been 10ft. You''ll notice that these systems are packaged with different lengths of line-set. The variety is obviously to fit different install scenarios, but an important thing to remember is that the amount of refrigerant charge shipped in the compressor is matched to the line-set length. Altering the length of the line-set after the fact technically changes that balance. So in my case if I shortened the line-set to 10ft I would be creating an overcharged condition and conversely if I had a 25ft line-set lying around and used it... it would be undercharged. I''m not certain how big a deal either of those scenarios might be, but I decided to try to make sure I installed the line-set it was shipped with without alteration. Not wanting to have the line bundle running vertically down the outside of the garage, I ran it inside the wall and had it come out a hole down about 12-15 inches off the ground, then I had to run it 4-5 feet horizontally before bending out to the unit. I wasn''t thrilled to have a 5 ft run but its low enough that the plants easily hide it. The lesson here is to put some serious thought into how long a line-set you''ll need. When I started planning the install (after receiving the unit) I cut a piece of Romex to the length of the line-set and played with different configurations before deciding the best place to park the outside box. I was pretty surprised how long 16ft was.
The inside and outside parts were pretty straightforward to install. As several reviewers of other units mention, the trickiest thing with the line-sets is bending the larger diameter tube. I spent the money on a fairly good tubing bender, the one that has the two handles and has sized channels for 3-4 different diameters. I think it cost me about $60 on Ebay, but it was worth every cent and the bends went flawlessly. I will probably just re-sell that on Ebay. I also picked up a flaring tool which I never used and will also resell.
So now I was at that "certified tech" part. For those whose successful install reviews I''ve read, I''m certain I must look like an idiot to you. But really, I have done some fairly sophisticated DIY stuff... lots of electrical, some major plumbing, several tile baths and couple of decks... but this humbled me. From all the reading I did, I was certain that I could do this myself if I was just careful. So I invested in few necessary tools. I bought a cheap vacuum pump on Ebay for about $100, a digital vacuum gauge for about $110 (required to read the necessary deep vacuum down to 200 microns), a set of manifold gauges for about $90 I think and a 410 adapter fitting (on Ebay for about $14). And trust me, you will need that adapter, no matter what the manifold gauges say. Mine said they were specifically for 410A (and that usually means the gauges cover a higher pressure max than the older refrigerant required)...but they did not fit the service valve out of the box. So... do the math... I am out close to $300 for tools I''ll likely never use again. Pretty sure I could have found a Craigslist HVAC guy looking for side-work for that, but some of us just like to try to do it to see if we can do it... anyway that''s me.
So I dive into playing HVAC tech and spent most of a morning realizing I''m not an HVAC tech. I spent a fair amount of time on the internet trying to figure out which ports on the manifold I should hook up to. Then another couple of hours trying to decide where the vacuum gauge should be hooked in there, suspecting for quite a while that someone must have forgotten to include the specific part I needed. Once I did get it connected correctly enough to actually get a reading on the vac gauge, imagine my excitement as I watched the digital display steadily decline from like 1900... 1840...1810...1790...1750...1710...1693...1643...1609...1588...1557 1557. 1558 .1557 .1557 WTF??? It has to down to 200 !!! Messed with the pump, oil, connections for another 2 hours... never got it go below 1200. I finally gave up trying to monitor the vacuum and to get a tighter connection I removed everything but the pump, connected it directly to the service port, let it run for an hour continuously, crossed my fingers, disconnected the pump and turned the control valves to release the gas into the lines. After much additional research, I''m pretty sure my problem was cheap Ebay vacuum pump. So I guess I should have dropped at least another $50-$70 on a better pump.. or maybe donated it to homeless HVAC guys.
The end of the story is so far a good one, the unit came up smoothly and works great did I mention I love it? I''m pretty confident I''ll recover most of the $$ for the tools. But whats eating at me is that I don''t really know how good an evacuation I got on the lines... so after all this.. I am probably gonna have a guy come out an check it out for me.
I am very pleased with this purchase, if I were to do it again, I would pay a pro to do the final checkout for cash, but again resign yourself up front no warranty.
UpdateOct 30, 2012
I am still loving this unit!! It cools the garage in no time and makes summer projects a joy. And on a couple chilly days this fall and all last winter...nice and toasty! No problems at all.
UpdateFeb 20, 2013
(Still in love!!) I thought I would update this since we''ve had some seriously cold days this winter, several in a row in the 20s and a couple of dips into the teens. I was really not expecting much heat output at those temps from a heat pump because, after all, not much heat left in 15 degree air. (And in fact purchased a 220 amp garage heater for those bitter days, not installed yet)
BUT....I have been pleasantly surprised! On a 20 degree day; while it won''t get the garage to 60-70, it does get it fairly comfortable (I''m not sure exactly how warm it got, definitely above freezing. I do know my wife complains when it''s not on and she goes into the garage to gets stuff from the spare fridge!).
The bottom line for me (re: heat) is that having this unit in my garage warms enough to solve two concerns; 1) I added a sink a few years ago and have had to use heat tape to prevent frozen pipes and 2) I do woodworking and have a cabinet full of finishes, paints, etc., that can be affect/ruined by freezing. Now I set this to about 40 and I no longer have to worry about either.Hey, Guys. I bought two units, the KSIM009-H219 and the KSIM018-H217. Research led me directly to the Klimaire distributor in Miami (I''m in Jacksonville) where they responded to my call for info. I bought directly from the dist where they cut me a break on the shipping for the two. Ordered on Thursday, they shipped on Monday SAIA freight and arrived in Jacksonville the next day where I picked them up at the terminal. Packaging was spot on, no issues.
Installed myself, but I''m no stranger to mechanical stuff. I think an installation of this sort for a newbie would be a challenge since there''s so many disciplines involved. The biggest challenge is working with the supplied lineset and making sure you don''t damage it or run short since you don''t want to modify the length. Careful planning always pays off here. After the typical hookup, I vacuumed the lines for about two hours on both units, opened the liquid line a bit to charge the vacuumed lines and evap up to atmospheric pressure, opened both packing valves and buttoned everything up.
At this point checked for leaks with a leak detector solution and found I had leaks on three out of four connections. Some serious tightening solved those problems and I''d say that was the most surprising, it takes more than you''d think it would. I worked with a plumber for several years as a young pup and the answer to "how tight should this be?" was "till it stops leaking."
After flipping the breaker on the disconnects I started each system and have simply been amazed at how quiet and seemingly efficient these units are. I think you could run them both on power from a hamster in a wheel. Matter of fact, I did connect both of these units to my gen-set so we''ll have cooling in those two rooms when the storm hits. Less than 4 amps on the small unit and 7 on the large unit. Amazing.
My thoughts on reviews. Anyone that is considering making a large purchase such as these will do some research and inevitably run across negative reviews and there are those here as well. But, any company that is putting forth the effort to bring items like this to market is not doing it to fail. Sure there are issues and problems that can and do arise, but that''s from any company, with any product. More often than not problems stem from a language barrier, and this is where patience, compassion and persistence will help solve most problems. If you''re looking for trouble, you''ll probably find it. Those with a bad experience will rush to warn while those with a good experience will simply enjoy and move on so one needs to see all reviews in that context.
Of course most AC guys in the states hate messing with something they did not sell you, or something they are not familiar with. Most everyone is biased in one way or another. Knowing that and wanting to learn something new can make a project such as this rewarding if you do it yourself. Of course it''s all at risk, and they''ll be no shortage of people with a God complex to warn you of that fact.
All in all, I''d say that if you''re a good car mechanic and know your way around the construction of a house and have an understanding of home wiring beyond the basics, you''ll be happy.
Of course, mine could fail tomorrow.
Feel free to write me with any questions and I''ll try to help.
All the best, Don
Fluidmaster 8300P8 Flush ''N'' Sparkle Toilet Bowl Cleaning System Save 43% Off
- Fights stains with every flush, leaves bowl crystal-clear
- Isolates bleach from the tank water so tank parts aren''t damaged by the detergents or bleach used by other in-tank cleaners
- Injects bleach-treated water only to the bowl where it''s needed, so application is efficient, not wasteful
- Leaves no residue and adds no bleach to the tank water that can damage parts or hinder operation
- This item is not for sale in Catalina Island
Installation was very simple. You don''t even have to shut off the water supply. I did six of them in less than an hour altogether. Replacing the cartridges is simple.
I was afraid the cartridges wouldn''t last very long, given the number of users in our house (and a number of them small children who tend to use the toilet more often), but even if our highest-use toilet they seem to last three to four months. On our lower-use toilets, I get the blue ones so I can tell when they''re running out. The high-use ones gets the bleach cartridges and I just replace them every three months or so. Occasionally I get in to replace one and find it still has a fair bit of material left in it; I just leave those for another month or so until it is all gone, or nearly so.
My wife likes these almost as much as I do; she thinks this system works better than the disks you drop in the tank (which makes sense; the cleaner/bleach is concentrated in the bowl where it''s needed, not sitting in the tank where some of it will pass through the bowl but most of it will go right down the drain), so we''re both happy.
Buy Fluidmaster 8300P8 Flush ''N'' Sparkle Toilet Bowl Cleaning System Now
I agree with those who believe that this product is superior to the drop in chlorine pucks. Here is how to make it more economical. Use up the cartridge that comes with the cleaner kit, then remove the used cartridge and with a hacksaw blade or serrated similar carefully cut off the top of the cartridge at top of the first line of perforations and using a flat file smooth at the cut line. Then discard the bottom of the used cartridge. You now have a usable cap with a seal. Buy several pounds of 1" chlorine swimming pool stabilized chlorinating tablets. drop three of these into the unit chamber and seal with the cap. Does the same job at a much reduced cost.Read Best Reviews of Fluidmaster 8300P8 Flush ''N'' Sparkle Toilet Bowl Cleaning System Here
I am writing a review of three toilet cleaning systems I''ve bought here on amazon:Fluidmaster:
Uses a cartridge containing a chlorine based tablet.
Cartridge is not meant to be refilled.
Chlorine odor noticeable in the bathroom.
Cartridge can be modified (I used a dremel) so it is easily refilled.
NeverScrub:
Uses a cartridge containing a chlorine based crystal.
Cartridge is not meant to be refilled.
Chlorine odor noticeable in the bathroom.
Kaboom:
Does not use a cartridge. Bromine tablet refill inserts directly by unscrewing a cap.
No odor noticeable in the bathroom.
All three of these systems work the same way and all are really easy to install. All of them put a toilet cleaning chemical (tablets or crystals) in-line between the water fill valve and the toilet bowl fill pipe. All of them prevent the chemical from getting into the tank water (so there is no damage to the plastic parts in the tank). All sell refills for their systems. All keep the toilet bowl equally clean for about 1-3 months depending on how often it is flushed.
Amazon also sells Pool/Spa Cleaning Chlorine and Bromine tablets, which as far as I can tell do just as good a job keeping the toilets clean as the refills but at a fraction of the cost. I have tried all of the following, each of which provide enough tablets to keep all the toilets in the house clean for 10 years and they are all very cheap:
Kem-Tek 177:
The tablets fit well in the dremel-tool modified Fluidmaster cartridges.
The tablets fit well in the Kaboom.
The bathroom has a slight chlorine odor.
Spa-Kem 267:
The tablets are too large to fit in the Fluidmaster cartridges.
The tablets fit well in the Kaboom.
No odor.
Tropi Clear:
The tablets fit well in the dremel-tool modified Fluidmaster cartridges.
The tablets fit well in the Kaboom.
No odor.
Chlorine and Bromine are fairly equal in cleaning ability. Chlorine has that chlorine odor. Bromine is broken down by sunlight. Which is why, on a sunny day, outdoor pools use chlorine. But at night, or indoors, or on a cloudy day, they use bromine since there is no smell.
Summary. The Fluidmaster system works but the cartridges are expensive. To refill the cartridges easily requires a small modification with a dremel tool. The cartridge is too small for any tablets larger than 1 inch in diameter. The NeverScrub system also works but the cartridges are expensive. What I am using is the Kaboom system with the bromine tablets (either the Tropi Clear or the Spa-Kem 267) as they have no odor and clean just as well as the chlorine tablets.
Want Fluidmaster 8300P8 Flush ''N'' Sparkle Toilet Bowl Cleaning System Discount?
Excellent for removing ring around the toilet and keeping it clean without any extra work. Does not erode toilet working parts and yet does a wonderful job. Easy to install, replace cartridges, and maintain. Investment for long term use. Highly recommended for home use.These work great!Use the bleach type cartridge.
Order several refills when you buy the unit to save shipping costs in the future.
Simple to install.
Works fine, lasts a long time........
Watts MAXVOC-975RV 10" Filter Housing Replacement Cartridge
- Fresh Water Supplies Carbon Block- 0.5 Micron Maxvoc-975Rv Watts Water Quality & Conditio
Buy Watts MAXVOC-975RV 10" Filter Housing Replacement Cartridge Now
This filter is identical to the one sold at the local RV store, only this one costs less. Works great. No reduction in water flow and water is clear and tastes fine.Read Best Reviews of Watts MAXVOC-975RV 10" Filter Housing Replacement Cartridge Here
I messed up and ordered this filter and it was not the one I needed. It still can be used in my system and I will keep it as an emergency filter in case I have a problem and need one quick.Brita Water Filter For Faucet (White) Save 17% Off
Tersano lotus LBU100 Sanitizing System Save 18% Off
- Sanitizing system decontaminates food and surfaces without harsh chemicals or residues
- Absolutely safe, even for babies or people with sensitive skin; the system operates without poisons, toxic substances or fumes
- Works 3000 times faster than bleach with no odors; FDA and USDA approved process kills up to 99.9-Percent of germs and bacteria
- Includes base unit, multi-purpose bowl with lid, trigger spray bottle, 2 microfiber cloths and a booster cartridge
- Weighs 9-3/5-Pound shipped; 1-year limited manufacturer''s warranty
1.) Washing fruits and vegetables. Now I am finally following Rachel Ray''s advice to wash everything when I bring it home from the grocery store. I pile in as much as the bowl (included with the system) will hold and rinse it briefly under the faucet to remove loose dirt. Then I fill the bowl with cool tap water and place it on the base. As I write this, I am processing 5 avocados, 4 tomatoes, and 2 peaches in the bowl. The cleaning cycle takes about 4 minutes, then you leave the produce in the water for another two minutes. The base unit counts down the time so you know when you''re done. Finally, I use the bowl''s lid, which has a built-in strainer, to drain the bowl.
There are a number of advantages to this method of washing produce. For me, the most important one is that I know that the produce is truly clean when the final beeper goes off. In the past I was never sure when I could stop rinsing my produce. This method is also a time-saver, since I can wash quite a bit of produce in each batch, and I can do other things while it is processing. Washing the produce when I bring it home from the store also makes it last longer, because the bacteria which cause decay are destroyed. Additionally, when I drain the water from the bowl into my sink, the super-oxygenated water helps to sanitize the sink. Finally, I don''t have to wash the bowl, because it is sanitized with each use.
2.) Sanitizing my kids'' orthodontic retainers, and the family''s various toothbrushes, nail clippers, nail files, etc. I use the bowl for this. I wish I had had this when my kids were babies, because according to the instruction book it can be used to sanitize pacifiers, baby toys, and other baby paraphernalia.
3.) Sanitizing my kids'' shower shoes and gear when they get back from camp or a field trip. I use the spray bottle, which is included with the system, for this. First I rinse the gear in my utility sink or with the hose outside. Then I fill the spray bottle with cool tap water. I place the bottle on the base, and start the processing cycle which takes about 2 minutes. Then you have 15 minutes to use the super-oxygenated water, after which it starts to break down into oxygen and water. The base unit counts down the 15 minutes, so you know when your time is up. I spray everything and let it dry in the sun.
There are several advantages to this method of sanitizing gear over my old way of using bleach and other cleaners. First, it is extremely effective. Second, there is no residue left on the gear (again, the super-oxygenated water breaks down into oxygen and water), so there is no rinsing. And third, I do not have to wear gloves.
4.) Cleaning my refrigerator inside and out. I use the spray bottle for this. I especially love the fact that no residue is left in the refrigerator, and there is no odd cleaning-product smell either.
5.) Kitchen countertops, sink, and cabinets. I have an under-mounted sink, and the thought of all the bacteria growing in the space between the countertop and the sink used to really bother me. In the past, I would fill my sink with hot water and bleach, but now I use the spray bottle. It is quick and easy, requires no rinsing, and there is no bleach smell or concern about getting bleach on my clothes. Plus there is a strong environmental benefit to avoiding bleach and the plastic bottles that bleach comes in.
6.) Bathrooms. In the past I used cleaning products that smelled terrible and that warn you to only use them in a well-ventilated area. It made bathroom-cleaning a dreaded chore. Now I use the spray bottle, and the job is quick and easy. I live in Florida, where mold and mildew are a big problem in the bathroom. We have had a particular problem with mildew growing in the toilet tanks (up where the flush mechanism is). This has been difficult to keep under control in the past, because bleach damages the rubber portions of the flush mechanism. The super-oxygenated water has not caused any damage, but has been extremely effective against the mildew.
I like the fact that no residue is left behind on surfaces, and the bathroom is truly sanitized. I will also note that although I have arthritis in my hands, the spray bottle is easy to use.
Other reviewers have mentioned getting an error code when trying to use the Lotus system. I have also had error codes in two situations, but I figured out how to deal with them.
The first error code I have encountered occurs when there is no water in the base. During processing, water circulates between the base and the attachment you have chosen (either the bowl or the spray bottle). Between uses, clean water remains in the base unit. However, when you are first starting out, or if you have emptied the base unit, it takes time to get water into the base unit. This is when I have had an F4 error code. I remove the attachment, fill the blue reservoir on the base with water, and then put the empty bowl on the base unit. Using a large measuring cup, I pour cool tap water directly over the valve system in the bottom of the bowl to get water to go through the valve into the base. Then I turn on the processing cycle and see if it will go. If not, I repeat these steps until it does. Normally you do not have to worry about this, because clean water will be left in the base between uses.
The second situation where I have encountered an error code is when washing fruits that shed tiny seeds or hairs, such as raspberries, blackberries, strawberries, and kiwi. I belive that there must be a sensor in the base that reads the water as dirty, and halts the processing. Even when I pre-rinsed these fruits, I still got an error code because you can''t get rid of all the tiny seeds and hairs. I dealt with this situation by emptying the "dirty" water out of the base. Next, I get clean water into the base as described in the previous paragraph. Then I put clean water in the bowl and process it in the usual way. At the end of the processing cycle, I remove the bowl from the base and add the fruit to it. I let the fruit sit in there for two minutes before draining. This way, no seeds or hairs circulate through the base to create problems. This is actually the method that the instruction book suggests for meat, poultry, and seafood.
I highly recommend this product, and plan to give it to family members as Christmas gifts. Please note that I am not associated in any way with the company that makes this product.
Buy Tersano lotus LBU100 Sanitizing System Now
I first learned of the Tersano Sanitizer in the January 2008 issue of "Fine Cooking", in a review of this and other ozone-based cleaners by the respected scientist and author Robert Wolke. Since I eat a lot of raw fruit and salads I was interested because of all the news stories about contaminated produce (and in our industrialized food chain, a contaminated batch from one farm infects a huge amount of food). So intrigued but not in a rush to spend $150, I read thru all the posted reviews (and comments to reviews, since a company spokesman leaves comments especially on negative reviews). So why am I adding another to the pile? There are a few things nobody else has mentioned that I think are worth knowing before buying this unit.The most important thing, of course, is does it work? I''m not a biologist so I can''t offer a professional opinion as to germ killing, but it clearly to me seems to be doing something plain water doesn''t. For example, after a dinner with wine if the glasses dry out there is a red film left that water and even soap don''t easily remove. But a spray of the Tersano-treated water and it dissolves away. It also seems to kill mold and dissolves grease splattered on the stove.
But you''ve read about cleaning elsewhere. Here are the new observations. First, if you''re planning on using this, figure its going to take some extra time. For example, you come home with some fruit, some lettuce and salad fixings. The Tersano comes with a large bowl for cleaning food, but it might hold 6 or 7 apples. So wash those, then repeat with the next fruit, then the lettuce stuff. Each cycle takes 2-3 minutes to prepare the bowl water and then its supposed to sit for 2 more minutes, then drain/dry and put the items away. Each cycle takes me 5-6 minutes, so I can spend 15 minutes just getting stuff cleaned and put away. Granted its now clean and wasn''t before so that''s valuable, but you should ask yourself if you''re going to commit this time each time you bring home groceries. To me it''s worth it.
Also while cleaning food its easy to end up with a bunch of bowls on your counter. The Tersano unit will tell you if the water isn''t clean at the end of the cycle, so you really need to rinse lettuce, parsley, etc. well before using the unit. Its an eye-opener to find out how much dirt is in stuff that looks clean and that you''ve just run under the tap (which is how I used to clean greens before); I find I need to dunk it in a bowl of water and swirl, often 2 bowls worth, before the food is really clean. And you''ll probably want a salad spinner out too so you can dry the lettuce before putting it away, otherwise it''ll get moldy. So that''s another bowl on the counter in addition to the Tersano unit. Bottom line is the unit really does sanitize food and you''re putting it away clean, but its taking some time and effort.
As for cleaning, I really LIKE that I can spray it around my kitchen and not worry about splattering any knives or things in the drying rack, or on the sink in my bathroom without having to first move toothbrushes and so on. Read the label on cleaners and you''ll understand why splatter isn''t a good idea with chemical spray cleaners. But again, there''s a catch. The bottle of 409 isn''t that big and is right there under the sink. With the Tersano the ozone water only keeps for 15 minutes, so you need a fresh bottle each time you''re going to use it. It only takes the unit about a minute to prepare the spray bottle, which is faster than the food bowl. But the Tersano isn''t small, so be sure your kitchen has room letting you put it somewhere where you can get to it quickly. If you have to unstack and move a bunch of things, you may be less willing to pull it out when you should be using it.
One bonus not mentioned in the literature is that the water seems to be purified by the machine so it doesn''t leave spots when it dries. I was spraying my sink and was quickly getting tired of drying the chrome faucet, so I decided to just let it go. To my surprise when the mist dried the chrome didn''t have spots. I''m just using ordinary tap water that usually leaves spots, so I''m curious to hear if other people are getting spot-free drying also.
While the literature says it can replace harsher cleaners, I tried it and it doesn''t always work. On some dirt spots the treated water didn''t really allow them to come that clean even with some scrubbing, but when I hit it with 409 the spots dissolved right away. This has only been in a few places, most others the Tersano water does a great job, but I wouldn''t throw away all your other cleaners until you''ve found out whats going to work for you.
Lastly, if you look at the pictures on the amazon site they show it with a mesh holding the fruit under the water. You need it because apples and other fruit tend to float, lettuce bobs above the surface, etc. That mesh is NOT included with the unit you buy. Since I read thru the reviews, I knew the company would send me one free if I called and they were really nice and did just that.
To sum up, I''m glad I got this. I use it a lot. I''m happy to be using it when I can instead of harsher chemicals.
Read Best Reviews of Tersano lotus LBU100 Sanitizing System Here
I read the review of Ed G of San Jose, California with interest. The reviewer is correct that ozone kills bacteria and can cause chemical reactions such as converting bromide to bromate, a potential carcinogen. However, the conversion of bromide to bromate is pH dependent, and also dependent on the amount of available ozone and bromide present in the water. I have personally tested the Lotus systems for bacterial killing, pesticide removal, bromate formation and ozone production. Analysis of pesticide removal and bromate formation was conducted by a private independent laboratory. Known amounts of bromide added to the water before Lotus treatment. Analytical analysis revealed little if any formation of bromate during the Lotus ozonation process and subsequent removal if present, of bromate through the filtration of the water. Moreover, the water after Lotus treatment was superior when compared to the water used before Lotus treatment.Gary E. Rodrick, Ph.D.
Professor
Department of Food Science and Human Nutrition
University of Florida
Gainesville, Florida 32611
Want Tersano lotus LBU100 Sanitizing System Discount?
...since there have been mixed experiences with this product, I waited until I had owned the sanitizer for a while before I wrote a review. I have had the system for 9 months now, and absolutely love it. There have only been 2 times where I have had an error (I believe it was an F1, though I can''t remember exactly) that was due to the machine needing one more cycle to complete the sanitization (I was sanitizing store-bought apples at the time) I emptied the bowl, filled it with fresh water, and the cycle completed itself. The vast majority of the time the machine completes its cycle the first time. The food feels and smells squeaky clean after the sanitizing process, and tastes terrific.The spray bottle attachment has been a particularly pleasant surprise I haven''t need to use chemical cleaners at all. The super-oxygenated water simply dissolves dirt and grime on contact, and has removed spots in the carpet as well. It makes a good deodorizer for upholstery as well.
This is truly a terric product in so many ways it''s effective, safe, environmentally friendly and one of the most "important" appliances I own for my health. Highly recommended!UPDATE Jan 2008:
OK, I''ve now had my Lotus for close to 1 1/2 years, and I happy to report I still use it and am glad I bought it. Actually, sometimes I wish I didn''t buy it because I hesitate to eat non-Lotused food, wondering what icky pesticides are lurking there!! It still works great, although the spray bottle is not the best sprayer and I''ve noticed sometimes some gunk gets caught in the blue wheel at the bottom of my bowl, which can be difficult to remove (push in the wheel, turn the bowl upside down and run it under water is what works for me) It can be a bit time consuming sanitizing all of your food, so I usually run one bowl of water and then dip items in there for about 30 seconds at a time -if I have a lot or if the water gets dirty, I may do a second bowl. Not sure if this gets everything 100% sanitized, but I figure it''s close enough, and I don''t have to run things multiple times and/or worry about waterlogged fruit or lettuce.
I don''t use it for household cleaning all that much -I just haven''t been all that impressed with that aspect, and the 15 minute limit is inconvenient. Also, it''s a hassle to brew up a bottle for a quick clean up. I have used it at times to clean up after raw meat or poulty and it''s nice to spray water not chemicals around food, on cutting boards, etc.
Now that the price has dropped by about $50 from what I paid, I think it is a better value, too.
Lastly, I haven''t replaced the cartridge (primarily because I can''t find them in a store and S&H makes buying online rather expensive) and it still works. So, in my mind, that is pretty much useless and I don''t plan to buy one unless my Lotus stops working.
-------
Original review:
I was undecided about purchasing this due to the cost and after reading the mixed reviews... but finally gave in. The unit seems to work fine and appears well made. I''ve only had to re-process one batch to date due to the F1 error (I guess my oranges were extra dirty!).
The biggest question mark to me is, does this thing really work? I have to assume so, but honestly, I have no idea. Food looks the same before/after sanitizing. If you''re expecting stains or mildew to instantly disappear, it''s not going to happen. You still have to wipe or scrub. Things might be "sanitized" but they''re not necessarily "clean" to your eyes unless you wipe, spray again, wipe some more, etc. At least with bleach, you can see the cleaning before your eyes.
Assuming it really works, I think this is a fabulous product. But I only give it 3 stars because 1) you can''t "see" it clean; 2) the high price and 3) some general disappointments. For example, most fruits float in water, so the top part doesn''t get sanitized. The bowl should''ve been designed with something to press the fruit under the surface of the water. Also, you have to replace the booster cartridge ($6) every 3 months, which adds up -this was unclear when I bought the product.
Brita Bubbles Grand Pitcher
Plusses over other Britas:
1. No more sloping edges allowing water to pour back
into the pitcher around the spout when loading.
2. No more large messy lid that flies off when pouring or
trying to open.
3. No more flying off lid when pouring.
4. Larger capacity
5. Stylish as Hell, especially in the black, gray, clear combo.
Now I am not ashamed to keep a Brita it near my semiauto Italian espresso
machine or the Krups heater,
Am I happy? You bet!I bought this filter water pitcher for one the color and style. And next because I wanted to make sure I had the beast water pitcher I can get. I know that Brita has a name brand that I can trust. And boy is it worth it. I love the little indicators on top. That lets me know when I need a new filter put in. It not real heavy when you fill the pitcher with water. And it has a easy to carry handle. The water taste really good and know after taste when you drink it. I really love my water filter pitcher.This pretty baby is a great space saver in the fridge and delivers the best drinking water I''ve had. Now, my kids enjoy getting their share of clean water daily!
PUR 1-Stage Replacement Water Filter for Pitcher
Keurig My K-Cup Replacement Coffee Filter Set
I ordered it based on a review that said it was Keurig stamped on the lid. When it arrived, I discovered that this was indeed the case.
I imagine that this is sold at a discounted price because, like perfumes and colognes, it''s an "open box" item... meaning no box and no instructions. Fragrances sold that way have a generic box for shipping but no fancy packaging and sometimes no cap.
The bad reviews I''ve seen on the replacement filters for the Keurig simply do not apply to this Keurig product... probably because it was made by Keurig, for Keurig and meant to be quality that would instill loyalty.
1) Reviews saying the lid pops off --NOT on this one... it twists a partial turn and locks in place... there is no "popping" off while brewing.
2) Reviews saying the filter is too porous and even coarse coffee grinds come through -- NOT with this filter... you can see for yourself that the filter is extremely tight... not only in the picture, but also in the package when you see it for yourself. It is obvious by looking that a fine grind will work in this filter, and it has for me. The tightness of the filter allows the water to truly be forced through, as it should be.
3) Reviews saying that the filter is ineffective because the sides are mesh instead of just the bottom -- NOT an issue... and anyone who has used a conventional coffee maker and a permanent filter knows that the filters are mesh on the sides with a plastic bottom to hold the mesh in place and keep its shape. You have to have a frame for the mesh in order to use the mesh as a filter. Common sense. Certainly not an issue here.
4) Reviews saying the filter doesn''t seat properly -- READ all the reviews from people answering back on that one telling people to remove the insert in the Keurig that is there to hold the K-Cups in place. They also tell you that the insert holds firmly in place, so while it acts like it is not meant to be removed, that it is made to be removed and you can read that in your Keurig manual or contact the company for that same How-To information. It only makes sense that if the filter takes the place of the K-Cup and it is inserted in the grey filter holder, that you would have to remove the Keurig holder in order to properly seat this 3-piece replacement.
When in doubt, and when without, head to the Keurg website for information and support... but TO REMOVE THE KEURIG K-CUP HOLDER INSERT, the manual tells you to grasp the top while pushing the bottom up from underneath. It''s a simple as using one finger to push up. Trying to pull it out will make this far harder than it really is; it pushes out easily. Once the holder is out, you will remark, "Wow! This looks just like the replacement filter holder!" Amazingly simple. Works like a charm.
I waited on a Keurig until there was a KEURIG K-Cup Replacement Coffee Filter available... because I knew that if Keurig made one, that it would not be the cheaply made junk that so many people have complained about in their reviews.
5-star real deal.... and mine came from WildWin at a great price and shipped IMMEDIATELY! So now I ordered another for the family.
Enjoy with confidence! I am.
Updated 11DEC2012 in response to questions about the filter:
1) To reseat the original K-Cup holder, take notice of the white triangles/arrows that need to be aligned; then, slip that side''s clip in first... it''s easier to get it to lock in place due to simple physics... when you try to push down on that side last, then you discover that your force is also trying to close the whole holder/basket.
2) Some people say the coffee basket in this replacement is smaller than the K-cups and holds less coffee -NO, it does not hold less coffee, even though it is smaller than the K-cups... the reason is easily apparent if you take a K-cup apart. Inside of a K-cup is a small paper filter that is "glued" to the top; once removed, you''ll realize that it does NOT extend to the bottom... and in fact, holds the same amount of coffee as the replacement filter cup.
3) People comment that the filter should only have a mesh bottom like the K-cups -this is incorrect because, again, upon opening a K-cup, you''ll find a full paper filter, so the coffee only drains from the bottom of the plastic cup... and the plastic cup is there to keep the coffee fresh -how else could you mimic a paper filter with coffee in a traditional pot, in a single serving, AND keep it fresh??
4) People comment that the coffee grinds spill over - impossible with the Keurig replacement because the rim of the coffee filter sit ON TOP of the rim of the lower holder AND the top cap locks over top of both rims. Once the replacement holder is in the Keurig, you lower the handle and the water "needle" inserts into the opening and seals against the holder, in the very same manner as it does with K-cups.
Again, for those with comments that differ... make sure 1) you''re using it properly and 2) that you''re using a Keurig. This product matches up PERFECTLY for the Keurig because it''s made and been tested by Keurig... and it''s worked perfectly for me.When I bought this for 1.99 + 7.99 shipping, I thought it might be a cheap imported knockoff of the Keurig My K-CUP.
It is the real thing. Even has Keurig moulded in the cap.
Total price is 9.98, Kroger has these for 14.95 and Kuerig has them for 17.95, so 9.98 is a great bargain.
They work wonderfully. Some K Cup reviews state difficulties in operating these, but the people who wrote them must have to have special class instructions on even using a ballpoint pen, as the My-K Cup is the easiest and most convenient way to make coffee.
Buy Keurig My K-Cup Replacement Coffee Filter Set Now
So my only complaint as with any Kuerig product, if you like a strong cup of coffee, the right k-cup after several trials of premium coffee might get you the strong cup of coffee but at 50 cents a cup. These my k-cup allow you to save money and trust me this is the way to go. K-cups are not recyclable so less trash too. Here''s where the trouble with these. Some of the my k cups have a tight seal along the top with the filter in. You want it to be tight for a strong cup. Reason, the coffee needs to be dark roast or espresso. It needs to be grinned pretty fine. More surface contact with coffee to water ratio. As ground coffee is put into the basket, tap if on the table to pack it in. Do not tamp it. Add until it is just below the top black rim. Because there is so much coffee in the basket, the kuerig product will struggle to force water through it and if that lid is loose even after it has been fully closed....the water and some grounds will seep out through that not so tight lid. I have two of these. One is tight and never leaks and the other is a nightmare if you are trying for the strong cup of coffee. These style of coffee pots do not spend a lot of time contacting the coffee itself. Results in a weak cup of coffee. These my k cups vs k cups is like blowing up a hot air balloon vs a balloon with your own breath. It runs right through it. The tapping technique but not tampered allows for a restricted flow and longer contact thus a stronger cup of coffee. The lid loose is like a whole in either balloon. A problem no matter which situation you have.Read Best Reviews of Keurig My K-Cup Replacement Coffee Filter Set Here
great to have in case you prefer a different coffee from what K-cups have to offer but still allows you to have the ability to make one single serving with little to clean upWant Keurig My K-Cup Replacement Coffee Filter Set Discount?
I really like coffee but I don''t think I''m a coffee snob. I prefer Dunkin Donuts to Starbucks.I received my single cup Keurig brewer for Christmas and was concerned that I would not be able to use the four pounds of coffee in my cupboard. The Keurig My K-cup had such rave reviews that I had to try it and seeing it was from the manufacturer how could I go wrong? I ordered this and was a little confused because I thought it would be 1) fill with coffee 2) insert in place of K-cup. Okay so I had to remove the original K-cup holder in order for this to fit. I did so and tried it.
The coffee tastes as good as it did in the drip coffee maker and it saves a lot of money. It won''t replace K-cups totally for me because I will open and use one bag of coffee at a time until it''s done. K-cups still let me have several kinds of coffee a day.
Why four and not five stars? Because Keurig could have inserted a little instruction sheet reminding morons like me to remove the cup holder first so the replacement will fit in.
ZRO-4 Undercounter 4 Stage Zero Waste RO Water Filter
We had to get a handyman to install this system and it took him several hours to put it together. Then we realized that the system requires power and has to be plugged in to operate. Unfortunately, our home, like most homes, did not have electrical outlets under the kitchen sink. So we had to call an electrician to install an electrical outlet for the unit to be plugged in. By the time we were done, we had spent more on the handyman and the electrician than what we paid for the system!
Maintenance is also hard. The system require filters to be changed every six months. The replacements kitts and shipping charges from the Watts'' website are expensive. I would tolerate that if the replacement procedure was easy enough. Unfortunately, it''s quite frustrating. The system has several parts and connections. The instructions in the accompanying manual are difficult to follow. In this day and age, you would think Watts could post a video on their website? The biggest problem is that the filter housings get so tight that you cannot unscrew them with your hands to replace the filter. You need to purchase a special wrench, which Watts does not bother including in the filter change kit. You have to order it separately and pay even more in shipping charges.I have been using this for several years. It works great. Previously I had a wasteful RO system. It trickled water down the drain 24-7. Big waste of water and noise enough to bother me sleeping. This produces about 2.5 gallons a day, which could be plenty or not enough. This one has a small electric pump, which hums when its making water, quiet when it''s done. The water is perfect.
Buy ZRO-4 Undercounter 4 Stage Zero Waste RO Water Filter Now
DII Kitchen Millenium Microfiber Kitchen Towel
Buy DII Kitchen Millenium Microfiber Kitchen Towel Now
My wife purchased these and is writing the review. She hoped these would be similar to her old DII MICROFIBER towels, purchased at Amazon last year and no longer available. Those previously-purchased DII towels, as well as some recently-purchased DII plain cotton towels carried a "DII For The Home" label. This set of towels being reviewed has a cheaply-printed "no-brand" label on the towel and nowhere does the packaging say "DII Home Essentials" (as they are advertised) or indicate any relationship to the popular DII line/company. Instead they are made by "Kitchen Millenium" and, when washed, each edge rolls toward the body of the towel and also shrinks up and down the whole length of that border. So, once washed, they are unsightly and a nightmare to use because you cannot flatten them out (remember your old rag-bag items). I wish I had read the other "1" review because I agree completely. (The DII microfiber towels I bought at Amazon last year lie flat out of the dryer every time.) Very disappointing. Oh, and they are not 16" x 24" but, brand new out of the package, 15.5 x 23.25" This is the second Amazon purchase in the last 2 months that has been advertised as a name-branded item and arrived as a substitution with a non-branded knock-off item.Read Best Reviews of DII Kitchen Millenium Microfiber Kitchen Towel Here
After a lifetime of buying terrycloth towels for drying my hands and smooth cotton towels for drying my dishes, I decided to give these microfiber towels a try and I couldn''t be more pleased. They''re nice and soft so they''re great as hand towels and they''re so absorbent that one swipe is all it takes to dry a dish. I''m even using one for wiping off my counter top and stainless steel sink so no more dish rags and sponges cluttering up the area around my sink. All of my old kitchen towels, nice looking as some of them were, have now been relegated to the rag bag :-)Want DII Kitchen Millenium Microfiber Kitchen Towel Discount?
I have washed these towels several times. They still bleed red dye when I wet them and wring out by hand. They have bled all over my other towels, even though I washed them several times by themselves in cold water and white vinegar. More trouble than they are worth.Kenmore 46-9902 Compatible Refrigerator Water and Ice Filter Save 17% Off
Soleus Air WA2-02-50 New Aqua Sub Water Cooler Save 45% Off
- Unique Bottom-load design
- Keeps water out of direct sunlight to reduce bacteria and algae growth & prevents leakage of cancer causing chemicals like BPA
- Included hose and cap are dishwasher safe
- FDA Approved
- Hot and Cold Temperature Settings
Update, they couldn''t find a unit for me. They will refund the money in 10-14 days. The also didn''t call me back to tell me this. I had to call them 3 times before finding someone who would tell me what''s going on. Do not buy anything from this company. they are just plain terrible. You''ve been warned.
Buy Soleus Air WA2-02-50 New Aqua Sub Water Cooler Now
I bought two of these.The first one failed within a couple of months. It wouldn''t turn on. I opted for a refund and was asked to cut the power cable and send it to them. The second one works about 10% of the time. During the 90% when it''s not working, the display shows EEE EEE. The red lettering burned out a long time ago. It''s a month out of warranty now (should have returned it promptly, assuming they have a 1 year warranty which I don''t know). I liked the idea of not having to lift the water jug high, but what can I say, gravity is more reliable than this thing.Read Best Reviews of Soleus Air WA2-02-50 New Aqua Sub Water Cooler Here
I purchased the Soleus Air WA2-02-50 New in 2010. I loved the product...until when, 6 months later, it no longer heated or cooled water. The manufacturer replaced it, but with a FAR, FAR inferior, PLASTIC unit, that didn''t even have a slide in/out slab for the water. The new unit is noisy,and doesn''t get really cold or adequately hot. Keep your $$$. This product is not worth it. I would not recommend to ANYONE.Want Soleus Air WA2-02-50 New Aqua Sub Water Cooler Discount?
Having the bottle hidden is very nice but the machine is very loud. Every time you pour water, i guess it re-draws the water. though it is only about 5 seconds long, it is really really loud and annoying. Also the machine arrived with a huge sticker about their product on the bottom and the sticker is impossible to remove. If i knew that it was not going to come off, i would have never tried so now it looks horrible. i called the company about it and all they said was that they only address "working" issues for the machine. I like the clean look but would not recommend the machine. Try other brands.Warning: If you have four hours to peel off the 7 x 7 inch advertisement from the front of your new water cooler, then this product is for you. Yes, a brightly colored permanently affixed decal with list of features of your new water cooler is prominently displayed on the front door. Great decor for your kitchen. Plastic door scratches so be very careful!!!! Don''t use tools. Just sit on the floor and use your fingernails when you have some spare time. Then get out the alcohol and painstakenly work at the adhesive so that the water cooler actually looks like it does in the picture. Stupendous thinking of the company. Thank you so much for wasting my time. Really.Culligan RV-800 Level 1 Recreational Vehicle Water Filter Save 24% Off
- Culligan Recreational Vehicle water filter with KDF
- Granular activated carbon filter reduces chlorine taste and odor, bad taste and odor, sediment and Bacteriostatics
- Filter Cartridge life of up to 2000 gallons
- NSF Certified
- Comes with a 5 year warranty
Buy Culligan RV-800 Level 1 Recreational Vehicle Water Filter Now
You will need to flush the filter before each use to avoid carbon (black water) filling your water tank. Did not go away after first few uses.Read Best Reviews of Culligan RV-800 Level 1 Recreational Vehicle Water Filter Here
i used this filter for a different purpose, to fill my hot tub. My tap water has a lot of metals and the water in the tub always look yellow and unattractive. i tried everything to get the metals outfilters in the tub, metal remover solutions etc. Finally I bouth this refilled the tub and the water is perfect!! Crystal clear, with a natural blue tint. i can''t belived it removed it all!Want Culligan RV-800 Level 1 Recreational Vehicle Water Filter Discount?
I''ve used this filter for about 10 camping days. I have no complaints about it. The water that comes through it tastes good and looks clear. I put my pressure regulator after the filter to minimize pressure drop, and the filter has withstood the pressure.Does a great job for large hot tubs. Just remember that the first time you hook up the water, a moderate cloud of carbon dust will come out. So let it flow for about a minute before you stick it in your crystal clear hot tub water.3M 16300 PPS Standard Size Kit Save 52% Off
- Sale Unit: CASE
Also, this allows you to paint upside down. Once in your gun put your gun upside down and wait until the paint comes out. It creates a vacuum and keeps until you remove it from your gun. Very handy for the hard to reach places. We will never go back to not using a system like this.this is a great product not only can you spray at any angle but you get more even coverage and they are cheap.
Laguna PowerJet 900 Fountain Pump Kit Save 48% Off
- Fountain and waterfall pump kit for water gardening
- Kit includes: PowerJet fountain pump, fountain pump, riser stem, diverter valve, flow control, 2 fountainheads, garden hose adapter, 2 hose couplings
- Suitable for ponds up to 1800 gallons; Circulates up to 900 GPH
- Equipped with 16 ft electrical cord; 65 Watts
- 3 year warranty
BRITA SPACE SAVER PITCHER Size: 1 Save 50% Off
I have owned several Brita pitchers in the past and had no reservations about purchasing another one because the others worked great. However, the design of this model is idiotic. The lid is made out of a poor quality plastic that flexes making it difficult and annoying to take it on and off or flip open the top opening. The lid also falls off (possibly because it is so hard to put on completely) when you pour from the pitcher unless you hold it on while pouring. This causes a mess if is knocks the glass you are pouring into or the reservoir is full and spills out a bunch of unfiltered water. Where the handle connects to the top, there is a significant dip (basically a hole) so that if you fill the reservoir close to the top, it is extremely easy for the water line to go above the hole. The handle is covered with another flimsy piece of plastic that is merely snapped on. When the water from the reservoir spills out of the hole, the handle fills with water. Since the covering of the handle is only snapped on and not sealed, if you don''t notice this immediately, water will start streaming out of the bottom of the handle all over you or your table or whatever. Even if you were careful not to fill the reservoir above where the hole is, when you go to set the pitcher down, some water will inevitably slosh through the hole and you have the same problem or water going into the handle and streaming out.
This is a terrible product. I gave it two stars because the filter itself functions just as well as any other Brita filter, but the pitcher design is a nightmare.

