Showing posts with label aquapure water filter. Show all posts
Showing posts with label aquapure water filter. Show all posts

Fit Fruit & Vegetable Wash, Soaker/Refill Bottle Save 31% Off

Fit Fruit & Vegetable Wash, Soaker/Refill Bottle, 32-Ounce UnitsWhen I first started using Fit I was extremely impressed at how well it worked for cleaning fruits & vegetables. It didn''t leave behind a bad taste, there was a noticeable improvement in how clean the food looked & tasted, and the food actually stayed fresher longer.

My cat is very picky when it comes to water. After washing her bowl with very mild dish soap and rinsing it thoroughly she would still detect the smell/tast of soap and would refuse to drink from it. I spent so much time rinsing her bowl out that it was ridiculous. So when I recently purchased a Drinkwell Platinum Pet Fountain (which is great by the way) for her, the thought of cleaning and rinsing it became a nightmare. That''s when I decided to give Fit a try, and wow does it work great. I can wash it, rinse it once, and my cat will drink from it without any problems. It''s also nice knowing that there aren''t harmful chemicals in it that I have to worry about.

So to make a long story short, Fit works great for cleaning your pet''s food & water bowls, especially for the ones that are picky/sensitive.

[Other Thoughts]

One thing to keep in mind, especially for people who are in hurry, is that Fit works best when you lather it up. For example, simply spraying it on an Apple and then rinsing off probably won''t do a whole lot. You need to lather it up with your hands first and then rinse it off.

According to their website Fit also disinfects and kills 99.9% of harmful bacteria. The reason I mention this is because they only advertise that it removes 98% of contaminants, and I wanted to make sure it disinfected as well -and it does.

In case anyone''s interested here are the ingredients they have listed on their website.

Ingredients/Chemical Name: Citric acid (from corn & molasses), sodium lauryl sulfate (derived from palm kernel and/or coconut oil), sodium carbonate & magnesium carbonate (all derived from minerals), Grapefruit Oil extract.

I cannot say enough good things about this product! It does a superb job on my produce, but I''ve also discovered that it''s great on my cast iron, (no matter what I''ve cooked on it). I just fill it with the hottest tap water and add about a teaspoon of FIT. After a two-minute soak I gently swish with a scrub brush and it''s clean. Rinse, and the brush looks like new again too. Before I dump it out, I dip a cloth and and clean my stove-top as well. The FIT solution cuts right through the grease! The first time I did this I noticed how sparkly-clean my rings were afterward, so now I use it in my ultrasound jewelry cleaner too. The list just keeps growing, to the point where I now use it to clean just about everything!

Buy Fit Fruit & Vegetable Wash, Soaker/Refill Bottle Now

I totally agree with the other reviewer about how great Fit not only cleans vegetables and fruits squeaky clean but also cleans and degreases all kinds of household items (I use it on my coffee pot and it takes coffee stains off of the white lid and gets the glass carafe sparkling clean)! Fit is also a great stain remover for carpeting, car interiors and clothing too (very gentle and doesn''t suds up). I''ve used it to remove grease from my hands as well because it''s so mild. The possibilities are virtually endless and this stuff lasts a LONG TIME. I bought two of these sized bottles well over a year ago from the Fit website before they joined with Amazon.com and I still have a full bottle left.

I''ve been using fit since it first came out quite a long time ago (when you could actually get it in local grocery stores) and when it was discontinued for a few years I was absolutely heart-broken and never found any other product that could even come close by comparison so I''m ecstatic that Fit has come back on the market and I highly recommend it. Once you try it you''ll be hooked.

Note: You do not want to water down Fit when using it as a spray-bottle refill. Just pour it into the sprayer undiluted.

Read Best Reviews of Fit Fruit & Vegetable Wash, Soaker/Refill Bottle Here

VERY Deceptive Marketing !!!

Company claims product removes 98% more pesticides, waxes, people-handling residues and other contaminants vs. washing with water alone.

The implication is that 98% more pesticide residues are removed vs. washing with water alone.

This is absolutely FALSE. (see STUDY below)

Claim bundling is one of the most abused marketing techniques. People who buy this product are probably most concerned about pesticides on their produce and it''s no accident that the company puts pesticides first in the bundled list of contaminants of which 98% more are removed versus water washing alone. Putting pesticides first creates a trigger response by the consumer 98% of chemicals removed!!!! CLICK BUY. It''s a lie according to the study (see link below). The study used a long rinse time of one minute but recommends a 30 second rinse for the same result (implied). If you spray with FIT, then rinse, you will use a similar amount of time but will be under the delusion that you have removed virtually all the pesticides.

The scientific fact, based on the Connecticut study, is that there is no difference between thorough rinsing with water vs. using FIT as far as pesticide removal goes. In fact, some chemicals, such as commonly used chlorpyrifos (nervous system inhibitor) and vinclozolin, bifenthrin and were not reduced either way unless you peal the fruit/vegetable.

The REALITY is that basic washing with water only is equivalent to using this product for pesticide removal. If you are paranoid about microbes on the produce, a quick spray with vinegar and/or real lemon juice is effective. Pealing, sadly, is the most effective way to eliminate pesticides... or go with more expensive organic produce.

This is a superfluous product that exists only to lighten your wallet.

SEE THE STUDY:

Removal of Trace Pesticide Residues from Produce

By Dr. Walter J. Krol

Department of Analytical Chemistry

The Connecticut Agricultural Experiment Station

[..]

Want Fit Fruit & Vegetable Wash, Soaker/Refill Bottle Discount?

Used Fit to clense fruit and vegetables for a long time. Always bought the spray bottle, but the bulk 32oz bottles saves money.

Very disappointed though, when the manufacturer would not reply to a simple email question I had about the usage of the product.

Save 31% Off

Lavelle #90-4a Korky Plunger & Holder Save 33% Off

Lavelle #90-4a Korky Plunger & Holder
  • Lavelle #90-4A Korky Plunger and Holder
  • LAVELLE INDUSTRIES INC

I wanted a discreet cover and plunger for our 3 bathrooms. The holders are fine and as described. Easy to open and close, and the plunger is raised so water drains into the base and air circulates to dry. The diameter of the plunger''s bell is the same as our old-fashioned plunger, but it does not work with our 30 year old toilets no suction at all. I called Lavelle (the phone # on the packaging is wrong, but thankfully the party I reached kindly gave me the correct number). They said they make no claims as to whether the plunger will work with any particular toilet, but the rep offered a solution that worked just fine: go to the dollar store and pick up the old-fashioned style plunger. Its wooden handle isn''t as attractive as the Korky''s plastic shaft, but it fits fine in the holder and gives the proper suction. Problem solved for just $1 each, and I gave the 3 Korky plungers to Goodwill.

Save 33% Off

Culligan CP5-BBS Level 4 Heavy Duty Sediment Replacement Cartridge Save 20% Off

Culligan CP5-BBS Level 4 Heavy Duty Sediment Replacement Cartridge
  • Fits HD-950
  • Level 4 Premium Filtration
  • Filters Fine (5-micron) sediment filtration: sand, silt, dirt, rust and scale
  • Filter life up to 3 months or 12,000 gallons
  • Not recommended for use with non-treated well water supplies

I recommend that no one buy this filter, in fact anything from Culligan. The quality of this product has changed in recent years such that it should be banned from the market. The problem is that the polymer endcaps fail in what is called "punching shear". I have used this make and model of filter for 10 years without a single problem until this past year. I purchased a few year''s supply of filters at once (as I normally do) in 2010 and noticed the endcaps were of a softer material than in the past, but I didn''t think much of this since these endcaps also serve as the gaskets. However, upon removal of this filter after using it for a few months (my typical use) I discovered the filter medium and endcaps had collapsed (not disintegrated) like an accordion, while the center core remained straight and at its original length. Closer inspection revealed the endcap had failed in a ring around the point of contact with the filter housing. This is the location where a separate gasket would be on top of the filter. Unfortunately, this did not turn out to be a one-time occurrence. The exact same failure has happened with three subsequent filters, even though I cut the use period in half. Clearly, this whole batch of filters is defective.

I have been in contact with the manufacturer (Culligan) over the past few months, and after some limited success at getting them to respond (which was a struggle I might add), they have eventually stopped replying to my emails. This is very poor for public relations. At first, I got several excuses as to why this was not their problem, the most interesting being their claim that the filters I bought were not made by Culligan because they were not purchased directly from Culligan. I informed them that I purchased them from Amazon.com, but they still maintained this argument. I scanned the label on the filter, which clearly shows their logo and contact information (which I had used to contact them) and they became even less responsive. Then I placed the next logical step in the investigation for them to answer, and that is when they ceased to respond altogether. This statement was that if they claim they have no material defects, and since they feel the filter is a counterfeit "knock off", then why haven''t they pursued legal action against the supplier to Amazon? I must conclude that they indeed discovered a material defect with their product and don''t wish to continue the discussion for fear of later litigation.

I have since researched and found alternate brands of filters (I use both a sediment filter and carbon filter in my system) and will avoid ever using Culligan products again. I will also recommend to anyone that I can to avoid this manufacturer. That is what has compelled me to write this review.

Buy Culligan CP5-BBS Level 4 Heavy Duty Sediment Replacement Cartridge Now

Nice filter. I was having problems with the blue top filters not working at all, I determined they were a few millimeters too short, allowing the water to bypass the media all together. These have more rubber at the ends and I''m getting a better seal, capturing much more rust. Plus, they are cheaper than Home Depot and fit my GE housing.

Read Best Reviews of Culligan CP5-BBS Level 4 Heavy Duty Sediment Replacement Cartridge Here

I echo the other reviewer about replacing this regularly. My filter disolved into a lump of sludge. Hope it doesn''t plug up the rest of my plumbing. I''ve used Pentek filters for years with no issues, but these filters just broke down and washed away. Literally a pile of paper and two rubber end caps floating around in the housing.

Want Culligan CP5-BBS Level 4 Heavy Duty Sediment Replacement Cartridge Discount?

I can''t say I noticed much difference in my water after replacing the 50 micron filter with this one because I don''t have a big problem with sediment. But I am pleased that the flow rate in the house doesn''t seem any different. It''s been installed about 2 months now. I expect it won''t last as long as the 50 version but if my water is cleaner then it''s worth it.

UPDATE Sept. 17, 2010

I learned something the hard way -CHANGE THE FILTER REGULARLY! I was waiting for the flow rate to go down as a sign to change this filter but it never decreased. Then a month or two ago I noticed the water starting to smell and it really got pretty bad. I''m on a well so wasn''t sure if it was the ground water changing but then thought of the filter. Oh my gosh, it was gross. Black & slimy & stinky and the paper had torn so the water was flowing right through with no filtering, hence no pressure loss.

This was about 6 months use on a well (no chlorine) which was way way too long at it turned out. I''d say the filter should be changed every 2 months.

Save 20% Off

Multiple water main breaks and living in a trailer has resulted in my having to use the Culligan heavy duty filter. With this filter I don''t have to remove the faucet strainers. It does the job simply and easily. I even travel the U.S and Canada with the canister attached to my hoses.

Pentek US-1500 Under Sink Filter System Save 18% Off

Pentek US-1500 Under Sink Filter System w/Monitor
  • This under sink filter system comes with monitor
  • Includes an electronic monitor that tracks water usage
  • Also includes a long reach drinking water faucet and installation parts
  • Certified to reduce 43 different VOCs lead cysts mercury asbestos, chlorine taste, odor and sediment

I bought this system to replace an under the counter system by PUR. The PUR system no longer has cartridges available.

After reading reviews and cartridge analysis I purchased the 1500 with monitor.

Set-up was a snap, water flow is moderate, cartridges long lasting, although the cartridges are often not available.

P-250 and P-250A cartridge sets are available for this unit.

I use the P-250A type as they filter the gas additive MBTE which was found in the water on Long Isand NY.

5 star performance minus one star for poor cartridge availability.

Buy Pentek US-1500 Under Sink Filter System Now

Product arrived damaged. Still waiting on replacement parts from manufacturer. Directions on installation not accurate. Pieces referred to are missing. Important steps also missing.

Floating Candle Kit : The candle you can use forever

Floating Candle Kit : The candle you can use foreverThe photos and colored water didn''t impress me much, and I was skeptical about how well a piece of rolled-up paper towel could work as a wick. I followed the instructions (but with plain clear water instead of adding the color) and was pleasantly surprised by how well these work and how nice they look in votive candle holders. The light is a little brighter than a typical votive candle. I am using these in the Wrought Iron 6 Arm Votive Candle Chandelier w/ Pots-Hand Made and they look great and give much more downward light (towards the table under the chandelier) than votive candles. I am using the cheapest store-brand vegetable oil I could find, with wicks rolled from a name-brand (starts with "Boun") paper towel. There is no smoke and only a little odor (like cooking french fries ... and much more mild than candles).

Caution: stick to the instructions and use only vegetable oil. I tried using citronella torch oil in one, and it seemed to work fine at first, but then after the oil warmed up enough, the entire surface caught fire. I was experimenting cautiously and had a snuffer (jar large enough to place over the entire votive candle holder) nearby. Without the snuffer, the situation could have been dangerous since the flame was too large to blow out and since the intense heat could have fractured the glass and spilled flaming oil everywhere if I hadn''t put it out right away. Vegetable oil has a much higher flash point and should be perfectly safe. In the votive candle holders, it stays cool enough to comfortably touch (I am guessing around 120 deg F) and is thus well below its flash point (aprx 620 deg F for canola oil).

I wanted a unique gift for a friend, and this is what I came up with. She''s an avid diver, so I did an underwater scene in the glass vase, combined with the blue powder (of which you need very little) for a personalized candle. She loved it!

I did have a bit of trouble getting the wick to work out. Definitely heed the instructions on the length.

Buy Floating Candle Kit : The candle you can use forever Now

The candles are awesome. I put them in a wrought iron holder that hangs from my deck roof. I have purple and orange for Halloween. They give off the perfect amount of light (more than a regular tea candle) Beautiful!

Read Best Reviews of Floating Candle Kit : The candle you can use forever Here

Hoping to use these for my centerpieces for my wedding. I played around with them a little bit and they are perfect!

Want Floating Candle Kit : The candle you can use forever Discount?

First: NEVER USE LAMP OIL WITH THIS PRODUCT -TOO FLAMMABLE! The directions call for vegetable oil and specifically exclude olive oil. I made the mistake of using standard lamp oil and two of the floating candles caught fire within about 30 minutes. I then tried peanut oil, which didn''t light at all, and I''ve given up for the moment. You have to get the wicks at JUST the right height -if they''re too short, they won''t light, and if they''re too tall, you have a high, smokey flame. If you can get the things just right I''m sure they''re fine, but I found them to be too much work.

BISSELL ProHeat 2X Select Upright Deep Carpet Cleaner Save 4% Off

BISSELL ProHeat 2X Select Upright Deep Carpet Cleaner, 9400MI am a 52 year old widow with 4 grown children, and I''ve always had at least one dog; now with the kids gone I have 3 small dogs. This is the third carpet cleaner I''ve purchased over 15 years. The first was a Hoover, and though I thought it worked fine, advances over the years have made big improvements both in the machines'' ability to clean, and their design.

My second machine was the old version of this machine, which was 5 years old, and still working, but one of the kids borrowed it, and when I stressed the importance of cleaning after use, she went nuts and disassembled the thing to clean it (totally unnesessary), and it came back not working well. Obvious user problem, not the machine''s fault.

So, I ordered the 9400 Select, which arrived promptly from Amazon, quickly assembled it, and went to work in the bedroom. With 3 dogs, I clean the carpet every 3 months. My dogs are potty trained, but they are dogs, after all, and unlike me they can''t remove dirty shoes when they enter the house. Amazing what 12 little feet can track in to a carpet! So, between my normal use, and the dogs, I am always looking for the best machine.

I am going to post some pictures of the things mentioned, if this site allows... By the way, the room I did first and will base these comments on is a 12x15 foot bedroom, with very light colored carpeting. Some reviewers expressed frustration with the fuzzballs that can get left behind. Yes, this machine does that. It is old carpet, dog fur, and dirt. It is confined, slightly damp, and picks up easily. In this room there were maybe 12 chunks of this stuff, which were picked up as I went along. Not slimy, didn''t require toweling or gloves.

Next, one reviewer said the machine leaks dirty water spots all over. Again, the machine at the end of a pull does leave some water spots. As soon as you go over the pull again, they are sucked up, leaving no spots in the wake. When I am changing the dirty water tank and refilling the bladder, I always throw a towel under the machine for the few minutes I am away. This is a water/detergent based machine; of course some excess might drip out when it is stationary. All of my machines did this, so I don''t even think of it as unusual.

As for not knowing when the bladder is empty and needs refilling, I did not hear the "pop" some reviewers did, but I didn''t need to stop and check the level, either. I just paid attention when pulling the trigger for the cleaning mode, and if nothing was being sucked up when trigger is released and it is in suction mode, which one can easily see through the clear design, I know there is nothing going out, and it''s time to throw out the old water and refill the bladder. In this room, I take an hour or so to clean it properly. People who want a 10 minute clean are going to get exactly that. It takes months, sometimes years for carpeting to get dirty, but some folks want it to be cleaned in 10 minutes. I just don''t get that. The trick is that though this is a very easy machine to use, the key is in going SLOWLY, and allowing the machine to do what it was designed to do. Get the fibers wet/soapy; then let the brushes get down deep, suck up the slop the machine cleaned, then turn the dial to rinse only (I always do this, though many don''t, because in my opinion detergent residue left behind becomes a magnet of sorts for dirt once the carpet is dry). In any case, to do the job right, this room took me about an hour. Time well spent, with excellent results. Cleanup is a breeze. Take the bladder/ takeup container, empty it, then pour water through the take up holder to get any remaining dirty water out. This takes all of about 1 minute.

If my trend of getting a new cleaner about every 5 years continues, and in that time I use the machine 20 times, this is a bargain.

I am thrilled with the results this machine gives, and highly recommend it. I guess the only other issue I could address is the storage, and I do understand that it is slightly bulkier than a traditioner vaccuum cleaner, and if one doesn''t have a spare closet it could be a problem. In this house, it just rests under the basement staircase, ready and waiting to be called into action again.

I have been through the ringer with carpet cleaners and stain removers. We have a dog that vomits about once a week. Unfortunatley, he does not do this on our wood floor, which comprises most of our house, but rather he prefers to stain our carpet. I think it is the law with him.

Anyways, I had no luck with the SpotBot I purchased so I was a little reluctant to try another Bissell Product. I saw the good ratings for the 9400 and figured I would give it a shot.

It seems to have everything one could need on a steam cleaner and it even includes Scotchgard Protection. I tried the Bissell on a tough stain that had set in for a couple of months. Nothing could get it out not even the Rug Doctor from the supermarket.

At first the Bissell did not totally get it out. So I tried it again with the hottest water I could get and heated the water with the built-in heater. Sure enough it got it out like a charm. I think Chem-Dry will have to find another customer now!

Steam cleaners are kind of a pain to use with all the filling of tanks and solutions and they usually soak your carpet. But I finally found something that can get up just about any stain and leave my carpet clean as a whistle. We have a winner!

Buy BISSELL ProHeat 2X Select Upright Deep Carpet Cleaner Now

I''ve been wanting to steam clean our carpets in our house for a number of years now. We had them professionally cleaned before moving in (8 1/2 years ago!!). Three kids, a dog, and a cat later have reduced our carpets to what I thought, was their last legs. The carpets are probably 12 years old (they were not new when we moved in, I am guessing here).

We have carpeting in our kitchen, our kitchen table rests on the carpet. You can imagine how dirty they look(ed) after years of spilled milk, cereal, wine, ketchup, etc... We had planned on ripping them up and putting in tile or Pergo in the next few years.

So this past week our dog gets sick and really puts me over the edge here. I decide to rent one of those "Rug Doctors" at the grocery store. However, I realize that it will take days for me to clean all the carpets and I really don''t want to have to shuttle the Rug Doctor back and forth to the grocery store (about 15 20 mins away). On a whim, I check out the reviews on Amazon and find that the Bissell 9400 is the real deal. There is even a reviewer mentioning his sick dog.

So I decide to go with the Bissell.

It was very well packaged, little boxes for all the accessories (there are a ton of them). There is even a mesh bag full of various cleaners (wish I knew that before I bought $60 worth of cleaners!!). The Bissell goes together in about 10 minutes (including the time it took to locate my screwdriver).

I used the Bissell "Pet Strength" cleaner, taking two bottles to do two rooms (wayyy more than is required, but these were dirty carpets!!).

It is a slow process, you have to push the cleaner forward, depressing the trigger. Move slowly, then pull back with the trigger depressed. A few passes more will remove the moisture.

I didn''t count the number of times I had to empty the resovoir and fill the water & cleaner. It certainly was a breeze to do.

This first pass took me some 3 hours to do, but was well worth it. I am willing to bet that this will go faster now that they have been recently cleaned!

I noticed a huge difference before they even dried!! The carpets were no longer soiled, almost all the food stains had been removed, the nap was much fluffier. I pulled out about a large handfull of cat/dog/human hair that the brushes spit up( This is normal and nothing to worry about, its much better in the trash than ground back into the carpet).

Once they dried (overnight) and after a pass with our Kirby, they looked incredible!!

My daughter walked barefoot on the cleaned carpet and on one in our family room (that is scheduled for next week). She said the clean one was a lot more cushier.

When I walk in the house now, I am greeted by a nice scent (there is a scent in the pet-strength cleaner) and a very clean-looking carpet!

I intend to clean our furniture as well as the rest of all the carpets. I''m beginning to believe that this will help with our allergies too....

If you are on the fence about this, go for it! You will not be sorry.

Oh, I mentioned above and will restate it. Do NOT use this like a vacuum cleaner, pushing and pulling at a fast clip. Go slow!! You will reap the benefits..

Update: 8 Apr 2006

Still very happy that we got this. Last weekend I completed the cleaning of all the original carpets in our home. I had to do all of our Master Bedroom in 3 passes (moved furniture around) because the pets loved to sleep under the bed, beside the dresser, etc). Before last weekend, the only "Original Carpet" uncleaned was the Master BR. The difference in smell when walking into the Bedroom was noticeable. (Before cleaning). We never noticed the pet odor because we were ''used'' to it throughout the house. Once I cleaned the rest of the house, the odor in the remaining room stood out.

After cleaning the Bedroom, I''ve noticed a very signifigant impact (for the better) on my allergies. Cleaning the carpets under the bed where we sleep made a huge difference.

On another note, I cleaned a pet stain (from where our dog was sick) in my daughter''s room. The carpet in there is only 6 months old. I couldn''t believe the hair it picked up! I originally thought I could bypass all the new carpeting, but am in the process of cleaning all the new carpeting too!

OK, in case you haven''t guessed it... This was by far the best $250 I''ve ever spent!

Read Best Reviews of BISSELL ProHeat 2X Select Upright Deep Carpet Cleaner Here

I didn''t think a cheap, inexpensive, household extractor would do a good job, but I was wrong. It does a great job. The spinning brissles do the trick, they really spin fast. It scrubs stains out better than a washing machine can get stains out from clothing. My friend uses this thing for house cleaning and she has been told many times that she does a better job than the carpet cleaning companies around our area. Reviewers mentioned the exhause being a design flaw because it breathes into the carpet. It is not a flaw, the warm air assists in drying the carpet. The turbo paw is fairly well built, it doesn''t spin as quickly as the main brissles but it does much better than just a regular scrubber. I think peoples'' expectations of the turbo paw are set high after seeing the floor extractor in action. I thinks it''s great esspecially for $225. Can''t top it.

ONE TIP: After shampooing, you may want to go over the carpet one final time to get any excess water from the carpet, turn your heater OFF. The heater draws from the 12 amp motor which steals power from the sucking mechanism.

Want BISSELL ProHeat 2X Select Upright Deep Carpet Cleaner Discount?

I bought my ProHeat a few years ago and it is by far one of the best home purchases I have made. I use it all the time and it really does keep the carpets looking clean and new. We have pets and a toddler and there hasn''t been a single stain it could not get out.

Very easy to use...just like vacuuming. It cleans so much better than the rental cleaners. With what I paid to have my carpets professionally cleaned twice a year, I paid for it in six months.

Save 4% Off

Danner 02720 Pond Mag 9.5 950-Gallon-Per-Hour Pump Save 31% Off

Danner 02720 Pond Mag 9.5 950-Gallon-Per-Hour Pump with Foam PrefilterI bought one of these that broke after one season and was returned under warranty. The replacement pump also broke at the start of the second season so I bought the replacement impeller kit which was the item that broke. That lasted only 4 months. I have a 1000 gallon pond in the northeast and run this for 8 hours each day for 7 months before it''s removed and stored in the basement.

Each time, the problem is with the ceramic bearing in the base. After several months, it loosens and begins to rotate along with the impeller. This gouges out the bearing seat and causes the impeller to rub against the sides of the base and finally breaks the ceramic shaft of the impellor. The base bearing cannot be removed so the pump is now useless.

Although it has only one moving part, that part is a huge problem. Two pumps, same problem three times.

Cheers....

I have been using this pump for about a month, and it has been working well. It pumps a pond at the bottom of a waterfall, through a filter, and into the upper pond. The lift is about 3 ft, so I get about 500 gph for the system.

The pump seems sturdy and well built. No problems so far.

The only issue with the order is that the description said the filter was a foam block, when in fact it was a plastic cage. I don''t have an issue with this because the cage works better in my application (pumping some silt is not an issue).

Buy Danner 02720 Pond Mag 9.5 950-Gallon-Per-Hour Pump Now

I have had this pump for about three years now and it has taken a beating and kept on pumping. On its third spring some plant material was sucked into the impeller and ended up breaking it. I just ordered a new impeller for 25 bucks dropped it in and all better. POND MAG is the best. By the way replacement parts are easy to find and easy to change.

Read Best Reviews of Danner 02720 Pond Mag 9.5 950-Gallon-Per-Hour Pump Here

This pump is a true workhorse! It''s a bit pricy, but you truly get what you pay for. I use it as a sump return pump for my 125 gallon reef and I actually had to dial the pump back a bit as it was too powerful at 5 foot head. It was easy to find plumbing attachments. Highly reccomended!

Want Danner 02720 Pond Mag 9.5 950-Gallon-Per-Hour Pump Discount?

This is the third Danner Mag Pump I have had over 10+ years and am replacing the existing one after 6 years continuous duty submerged in my fish pond not because it is broken it is still running strongly but I wanted to increase flow rates.

If you are looking for total reliability backed by a good warantee ( never useded ) this is the pump you should buy.

Save 31% Off

Hamilton Beach 48274 Brew Station 6-Cup Coffeemaker Save 29% Off

Hamilton Beach 48274 Brew Station 6-Cup Coffeemaker, BlackOk, in my family, I am the only one who drinks coffee. My wife does not. This coffee maker is perfect for myself. It allows me two full 14oz mugs of coffee without wasting an entire pot on just myself.

Most 10-12 cup coffee makers don''t do a good job of making smaller amounts of coffee for those of us that may have a single coffee drinker family. The coffee is either lukewarm or not strong enough when trying to make a smaller batch. My wife doesn''t like coffee so I am stuck either getting an expensive single K-cup style coffee maker, pod maker or a 4-cup drip brewer. However, thanks to the Hamilton Beach 48274 Brew Station 6-Cup Coffeemaker, I can end my search for the perfect solution.

The Brew Station makes an excellent, piping hot cup of coffee. It is said to be a 6-cup brewer and that may be the case for a regular 5oz mug. But for me, I use a 14oz mug and this brewer makes exactly two full mugs of coffee with none to spare. The coffee maker does an excellent job of keeping the coffee hot until needed, without continuously cooking the coffee or burning it. The programming is easy to use, and the overall design is simple enough once you get used to filling the water reservoir. I immediately ran three brewing cycles of just water once I opened the box and then made my first batch. There was no plastic taste or any other chemical taste to my coffee.

Other reviews have stated their Brew Station leaked, but mine does not. There is a little plastic arm that swings out over the coffee ground basket which dispenses the water. I could see that if this arm was not swung out over the basket, it might leak out the back. Also, the actual dispensing mechanism might be another place for leakage if there are coffee grounds or some object stuck between the valve and gasket so be sure to make sure this area has no coffee grounds in it prior to using. Again, I have not had this problem and don''t anticipate that I will as I am really careful to not get coffee grounds in the coffee reservoir and always make sure the arm is over the brewing basket.

Others have mentioned that 8-12 cup filters don''t fit this maker. The manual does not state which size filter to use either. I have found that 4-cup filters are a perfect fit for this maker and most likely what Hamilton Beach intended. Walmart sells 200 of these filters for around one dollar. If they aren''t on the coffee aisle at Walmart, then check where the coffee makers themselves are sold as Walmart tends to sell things in multiple locations inside a store.

Overall, I am very pleased with this maker especially considering the price.

I bought this coffee maker because I got tired of making single cups in my Senseo. This is a PERFECT size for me...3 full coffee mugs the size I use. LOVE the fact I can use a "program" brew feature.

Maybe I was one of the "lucky" ones...but so far no problems. BUT, just want to address some of the prior complaints.

1) "Leaking"....none for me...just at the end when you flip the lid open to clean out the grounds, etc...simple condensation from the lid...just wipe it up.

2) "Not hot"....coffee was PRETTY darn hot....I CAN say, though, as time goes by, the 2nd and 3rd cup were "hot", just not SUPER hot as the first cup...I programmed mine to be ready EXACTLY when I get up....NOT 30 mins earlier,etc. The process of brewing is REALLY fast, so IF you can''t get the time that close, just have it ready the nite before....don''t use the "auto brew" feature....just turn it on "manually" and it''s done basically in 4-5 mins.

3) "Weak"....I used one "coffee scoop"...which is basically a tablespoon/cup...strong enough...depending on taste...maybe use a "columbian" coffee....the REAL stuff....that''ll put hair on your chest!! LOL Or, a French Roast....JMO

4) "Filter size"...well, I used what I had on hand...the larger sized ones. I made sure the "water arm" was placed properly to dispense the hot water into the middle of the coffee area...no problems. BUT....I can say....using the "taller" filters (for the 12 cup makers) is DEFINITELY a far better practice...I noticed the grounds traveled "up" the filter after I opened the lid when done brewing....using a "shorter" filter (even though "look wise" they are a better "fit") it would DEFINITELY cause the coffee to overflow out the filter. Just make sure when you close the lid with the "taller" filters a) the water "arm" is centered over the grounds in the filter b) when you close the lid, be sure the "excess" filter material is "fitted" around the inside of the filter basket...it WILL obviously "crinkle" on the top when you close the lid since it''s taller.

Seems like a lot of work...but, just common sense stuff...for the money, and compact size, you can''t go wrong !!

********************

January 31, 2011

Have NEVER done this...but when I bought this, there were quite a few "1 star" posts. I ended up thinking "I must be one of the lucky people who always get things that work".

AND...yessss, I must have too much time on my hands to come back and update my original post....LOL

1) No offense to anyone....BUT...I didn''t bother to read the "directions"....coffee makers are kinda "self explanatory"....or simple enough to figure out...NOT rocket science, IMO. AND...there''s "pictures" on the lid with step by step directions if you forget what to do.....

2) I''ve been using 1/3 cup coffee Folgers STILL the filters that fit my 12 cup maker...STILL just "fold" the excess paper over the edge of the filter basket.....STILL MAKE SURE THE WATER ARM IS MOVED ALL THE WAY OVER THE FILTER BASKET as far as it will go!!!!! Add xtra coffee if it''s "too weak" for you!!

****Yes...the lid stays sligltly "open" does NOT go all the way down. One thing wrong...but I said "deal with it".

Coffee is HOT!! Unless you''re adding enough milk/half-n-half to make something like a "latte"...then, it WILL be cool. I get THREE 10 oz. mugs of coffee out of this machine....YES, I went and measured!! LOL

3) Fill ONLY up to line inside the well for the water....they put them there for a REASON!!! AND...make sure the water goes INTO the well...DO NOT pour it all over the inside....there IS an "opening" for the dispenser device....which can be seen....and water WILL leak out if you pour it all over the place.

4) Be sure the coffee "well" is put TOTALLY back into the maker...NOT tipped...FLAT with the bottom of the space where it goes.

5) AGAIN...when you flip the lid "up" it WILL have water droplets....the water WILL leak out the back as it flows off the lid....it''s called "condensation"....not much to do but to WIPE IT UP!!!

6) Coffee maker IS light weight...coffee maker WILL move as you push the dispenser button to get coffee into your cup ....NOPE, it''s NOT a "Krups" or "Cuisinart"...it doesn''t imply it is.

Now I KNOW I have too much time on my hands this morning...but, after going thru all this, I''m NOT gonna delete my post now....LOL

Buy Hamilton Beach 48274 Brew Station 6-Cup Coffeemaker Now

After reading the negative reviews, I was a little leery of buying this coffee maker, but my daughter bought it for me, and I''m thrilled. I have found that if I''m careful pouring the water in and if I pack the 4-cup filter in the basket before adding the coffee, I have no problem with leaks. The little arm that sprinkles the water over the grounds moves automatically in place when you close the cover, but I just position it myself to be sure. The programming function has worked great so far. The best part is that I no longer have to put the coffee in the microwave after pouring it-it''s nice and hot. I think the dispenser is cool, and I love the fact that there''s no glass coffee pot to play around with. I feel it''s very easy to clean-I just let the pot cool and then soak it for a few minutes and wipe it out. There''s hardly any water left in the reservoir after brewing which is great

A word of caution-the components are made of cheap plastic so you do need to be a little careful putting them in place. Don''t let the cover slam because it won''t close tightly and I think I may have displaced mine a little but it still works fine. It''s a little noisy-makes a soft perking type noise as long as there''s coffee left, so I know when it''s almost empty because the noise stops. There were complaints about it not really making 6 cups, but as far as I know, every coffee maker on the market uses the 6 ounce measure as 1 cup, even though there are probably not many people who use that in real life. What does a 6 ounce cup even look like???

I think there may have been some improvements since the earlier reviews-there is a picture guide inside the lid, and a very basic manual. One thing it does say is not to use more that 5 Tablespoons of coffee, probably because if you use much more, it will leak or get grounds in the coffee. I have had no trouble so far with using heaping spoonfuls

Read Best Reviews of Hamilton Beach 48274 Brew Station 6-Cup Coffeemaker Here

Made my first cup of coffee this morning in my new 6-cup Brewmaster. I read the reviews of the thing after I bought it (of course) and took note of the many complaints about leaking. It is an idiosyncratic little device. The coffee basket isn''t quite deep enough for standard 10-cup filters, so that when you close the top, the mashing action can push the water arm out of the way, which I''m guessing can lead to leaks. Thing is, I see no mention of a water arm--dripper--whatever in the instructions or in the diagram, and the part is movable. If it moves, you should mention it in the manual, especially if said ''it'' needs to be in a certain position for unit to work properly. Because you have to move the water arm out of the way to take the basket and reservoir in and out, and if you don''t move it back in place after you put the reservoir and basket back in the machine, the water will not drip over the coffee but elsewhere. Given that the arm can also move around after you close the lid, it really needs to be mentioned in the directions. Too bad it doesn''t lock in place. It moves too easily.

The brand of coffee you use will help determine whether you can 1) fill the thing to capacity, and 2) get a decent cup of coffee. Instructions say to add 3/4 tbsp per 6 oz cup instead of the usual 1 tbsp (or 2 tbsp in the case of Starbucks coffee, which I tried first). Make note of your preferred coffee if you''re thinking of buying this. My first cup of Starbucks was definitely weak. I then made a cup using Eight O''Clock French Roast, and that tasted better but was still a little weak for me. My rule of thumb will be ''more coffee, less water.''

During clean-up, I noticed dried coffee on the reservoir''s metal warming plate. Not sure how much flavor that would lend to any coffee left in the reservoir, but it''s one more reason to stick to one cup at a time.

I agree with the other reviewers who say that the coffee is not piping hot. Not much of a drawback for me, but if you''re one of those people who adds a lot of milk/cream to your coffee, you will wind up with a lukewarm brew.

Over all, the unit is a decent fill-in for someone who just wants a cup at a time--many larger coffeemakers have trouble when brewing smaller amounts. I like it because it''s fast, small, doesn''t take up much room on my kitchen counter, and there''s no carafe to worry about. As for the coffee-water proportions, every coffeemaker is different and you always need to work that out anyway.

One star for the manual, because it''s incomplete. If I hadn''t read the other reviews here, I wouldn''t have been on the lookout for leaks and wouldn''t have caught the fact that the water arm had moved after I closed the lid.

UPDATE (8/29/2010): Still using my Brew Station. It still makes pretty good coffee. If I fill to the 4-cup line, I add 6-7 level tablespoons of autodrip-grind coffee. Yes, it''s more coffee than the directions say to use, but that''s the amount needed to make a strong brew.

The unit has leaked since the beginning, but these aren''t signs of breakage or damage. It just isn''t a tightly closed system, so there are plenty of places for water to condense and drip. The underside of the lid especially collects water, which can drip down the back of the unit when you open it to remove the used grounds. Leaking also increases as deposits build up--it really is important to clean the unit regularly with a good descaler like CLR.

Still give it 3 stars, maybe 3 1/2 for lasting as long as it has. If it breaks down at some point, I would consider getting another.

Want Hamilton Beach 48274 Brew Station 6-Cup Coffeemaker Discount?

I bought this to replace a 12-cup coffee pot that I couldn''t get bad smell out of, and I''m the only one in my house who drinks coffee. This thing is fabulous! Read pros and cons below:

Pros:

Low price!!

Programmable, so I can have hot coffee waiting for me when I wake up in the morning.

No pot. I just put my cup under it and have a hot cup of coffee.

Easy to clean. EVERY part that coffee touches is removable on top, unlike some where the basket the filter sits in is attached.

Cons:

There''s no way to know how much coffee is left. No window or meter or anything.

It has a tendency to slide back when you press a cup against it.

It''s easy to spill when pouring water into it, but just be a little careful and it''s no big deal.

For the price (actually a little cheaper at Walmart), you can''t beat this! I want a second one for making tea!! =)

Save 29% Off

Kiwi Protect All Rain And Stain Repellant

Kiwi Protect All Rain And Stain Repellant - 4.25 OzI loved this product. Works very well on shoes & it was a quick, easy purchase!

I reccomend this brand to everyone :)

You can no longer purchase in stores so I was really happy to find this online. It does great on my shoes.

Buy Kiwi Protect All Rain And Stain Repellant Now

DeLonghi ECO310BK 15-Bar-Pump Espresso Machine Save 29% Off

DeLonghi ECO310BK 15-Bar-Pump Espresso Machine, Piano BlackWe were worried about purchasing this product after reading the previous review about the lukewarm results. However, we had read so many other reviews of similar machines that we thought it could easily have been user error. When we bought the machine, we actually read the manual very carefully before doing anything. (Not our typical style :) We followed the instructions. We did more than the minimum 5 recommended times of running the machine using water only; it needed about 10 times of this to get really hot -but only on the first time out of the box. The espresso itself can be pretty good, but probably only for a casual espresso drinker. Even for casual sippers such as ourselves, it is easy to pull a shot that is completely undrinkable. (Actually, my husband is less discerning, so we feed him the "bad" shots.) I know what a beautiful espresso tastes like since I work next to a famous Illy shop in DC, and this espresso is, sadly, not the same. But, it is still very wonderful and enjoyable. Very drinkable, if you take care. Overall, I am very happy with this purchase.

I would like to give another tip, which is that the first 10 or so times that you use the machine, the filter attachment (the thing with the handle) is extremely hard to get to its fully attached position. Fully attached is perpendicular to the machine; this is not indicated anywhere in the manual. So if your machine is LOUD, you may not have this fully attached. It gets easier after a few uses. The machine is not very loud when you use it properly.

Cheers!

I fell in love with this machine--both its looks and its espresso quality--after being introduced to it by a DeLonghi employee in a department store. He pulled a great shot for me in the store: dark, rich taste, very hot, with a lot of crema, and for the past week I''ve had similarly great results at home. I was leery buying this machine after reading the Amazon reviews, but I took a risk and I couldn''t be happier.

Lukewarm shots seem to be a common complaint for machines like this. They happen for a variety of reasons, but this 15-bar pump definitely produces all the heat you need. Problems occur, rather, when the filter (the scoop-like handle) and your espresso cups aren''t hot enough. First, run the machine with just water at least once before you make a shot, every time. I also run the filter and my cup(s) under hot water just before using, and as a result my coffee both tastes rich and is very hot. You also, without a doubt, need coffee that''s been ground with an excellent conical burr grinder to get a fine and consistent grind, which is crucial for the way machines like this work. Most grinders that do a great espresso grind unfortunately cost as much as this machine, but as a substitute you can certainly get it ground professionally at your local coffee shop, and use that coffee for a few days. Not as fresh, but the grind is more crucial. Keep in mind these two things (good grind + warm cups & filter) and you will produce fantastic shots with this machine. And its style definitely classes up your kitchen!

Buy DeLonghi ECO310BK 15-Bar-Pump Espresso Machine Now

I had the same leaking problem with the DeLonghi 270 that so many others seemed to have. I had it fixed, but decided to give up when the frothing nozzle melted onto the unit and could not be removed for cleaning (right after the one year warranty expired). The DeLonghi ECO 310 seems to be a much better design. It has a larger water tank, easy to remove frothing cover and nozzle, makes a large cup of espresso fairly quickly, and doesn''t look chintzy. Hopefully, it''s built for the long term. The only drawback I found was that there is only 3.5 inches between the cup tray and the filter holder, so most large mugs don''t fit. That seems to be common with these machines, however. Also, I would like to mention that the measurements in the product description are slightly off. It is 10 3/4 inches deep x 9 3/4 inches wide x 12 3/4 inches high (to the top of the steam knob).

Read Best Reviews of DeLonghi ECO310BK 15-Bar-Pump Espresso Machine Here

Purchased to fit the look and size of my small European kitchen, I use it with the little Deca Premium pads easily available here in Belgium for a reasonable price. Haven''t yet tried tamping my own cup with ready-made, or grinding & using my own beans, but when I do, it''ll be Illy or Lavazza, or Douwe Eggberts coffee, that I try. The coffee itself, and fineness of the grind, is 9/10ths of the equation when it comes to filter coffee or espresso, in my opinion.

Haven''t had a bad cup yet using the Deca pads, and the temp has been just fine, every time, so no reason to go crazy trying everything under the sun. Around the corner, there are 8 caffes I can use for that, anyway! What I wanted was a way to get my caffiene fix, quick, here at home, without needing a degree in avionics or engineering to learn the ins and outs of the machine.

It was simple to use using the "quick card" pictures included to set up and get going, and in a few minutes--voila! Hot, delicious espresso.

The machine is brand new to me, so maybe over time I''ll come to find some things I don''t like about it. For now, it''s exactly what we wanted at a price we didn''t mind paying.

Want DeLonghi ECO310BK 15-Bar-Pump Espresso Machine Discount?

I have to say that I love that I got this espresso machine. It has been a lot of fun making tasty espresso at home. This is my first espresso machine and before this I had never pulled a shot of espresso before. After only half an hour of explanation I learned how to easily pull a very tasty shot from this machine. There is a lot of good stuff about this machine, but also a few things I wish were improved upon.

The best thing about this machine is that it is easy to pull a delicious shot of espresso with this machine, if you do it right you won''t fail. I like that the machine looks really good on my countertop. It has a larger water reservoir and a nice cup warming tray, although the warming tray won''t heat up your cups but will keep them warm if you have already heated them up with hot water. Its really great that I can use either a prepacked coffee packet or tamp my own grounds for the espresso. The two spouts pour very evenly and it produces a lot of great creama.

There are a few things I wish were improved upon. One of which is the button interface, its nonintuitive if you are using it for the first time. I will go into detail later on how to properly use this machine. Another big annoyance is that frother wand only swivels side to side and doesn''t rotate front to back like most machines have. The whole thing is made of plastic which gives it a slightly cheaper feel and makes it less sturdy when you are knocking the thing around. Another big annoyance is that the size of tamper you need is a really uncommon size, 52cm, and the tamper provided that is attached to the machine is awkward to use and you never really get a good tamp with it.

Here is how I have learned to make a cappuccino with this machine. If you have any other tips or recommendations, please comment below as I am still learning too.

1) Fill the water reservoir at least a quarter of the way full with water.

2) Turn on the machine by pressing the top button. The top red light should turn on. Press the bottom button to heat the water for steaming (disregard if you are not going to steam any milk). The bottom red light should turn on.

3) Grind your beans using a burr grinder on the espresso setting

4) Put a filter basket into the handle filter holder and fill the filter with one or two scoops of ground coffee using the provided scoop. (1 scoop if using the one cup filter, 2 scoops if using the two cup filter)

5) Using the handle of the scoop, level off the coffee grounds with the top of the filter. You can push the excess grounds off the filter

6) Tamp down your grounds with ~20 lbs of force. You will get a feel for how hard you need to tamp it after you see a few results

7) Turn the filter holder over and lightly shake out any loose coffee grounds. Make sure to hold the filter lock up so that the filter doesn''t fall out

8) Put your filter holder back in your machine

9) Fill a cup or frothing pitcher with however much milk you want. I pour in about half a cup of milk.

10) Once the middle green light turns on, you are good to go. Open the steam, using the knob on the top of the machine, for just a few seconds to let any water out. It is good to have a cup under the nozzle to collect the water.

11) Now put your steam nozzle into your milk and open the steam. If you put the nozzle at the bottom of you milk you will make less foam, like a latte and if you keep your nozzle near the top of the milk you will make more foam, like a cappuccino. Steam your milk until you have the amount of foam that you like and the milk is just slightly too hot to the touch (140-160 F)

12) Close the steam and take the nozzle out of the milk. Now lightly tap the bottom your pitcher and swirl the milk to make the foam just right

13) Turn the steam function off by pressing the bottom button. The bottom red light should turn off.

14) IMPORTANT. Now you want to surf the temperature back down to the proper coffee pouring temperature. To do this you want to have an empty cup ready under the steam nozzle. I use the cup that I will drink my coffee out of to heat it up, afterwards I place it on the heating trip. Open the steam knob all the way and after this press the middle button (the coffee button). You should get all the steam out of the wand at first and then the hot water will start pouring out. Do this until the middle green light turns off. Now unpress the middle button and then close the steam knob. This will help prevent your machine from burning out its heating elements.

15) Once the middle green light turns on, place your shots under the filter and press the middle button. Espresso should start pouring out in a few seconds.

16) Once you have the right amount of espresso unpress the middle button.

17) Pour your espresso into your warm cup and then pour in your steamed milk slowly adding in your foam at the end.

18) Enjoy you delicious espresso.

Save 29% Off

Slim Line Sprite Shower Filter

Slim Line Sprite Shower Filter without Shower Head-WhiteThese filters work fine to take chlorine out of your water. You screw them onto a standard shower pipe and your showerhead goes onto them in front. The threads on this filter are plastic, so you need to be careful not to booger them up. It''s not possible to see how the pipe is going into the rear threads, so you need to feel it out and get it on tight. Some teflon tape is included -this should be wrapped clockwise around the shower pipe threads.

I rate it 4/5 stars due to the plastic threads. These aren''t so cheap at $40 and put a lot of plastic in the landfill if you change them every 6 months. You might want to take a look at more solidly built alternatives that use small replacement cartridges and cost less in the long run. The same company, Sprite Industries, also makes a Universal Shower Filter in nickel that takes small $15 cartridges.

I did alot of research before buying this shower filter. It''s great. The boyfriend installed it in about 1 minute. It doesn''t impede the water flow very much at all and look quite good in the shower. We already can feel the effects of the filter on our skin. I highly recommend this product.

Buy Slim Line Sprite Shower Filter Now

Due to a malicious design the filters can not be stacked one on top of another for better filtration performance and the plumbing fittings are going to cost you and arm and a leg. I had to buy Aquasana shower filters because they can be put in a row connected to each other. If your public water utility is good buy only one but if you live in New York City this product is not for you. So much for having the purest water in US.

Read Best Reviews of Slim Line Sprite Shower Filter Here

Grohe 46 298 IE0 Ladylux Plus Handspray for 33.737 and 33.759 Save 49% Off

Grohe 46 298 IE0 Ladylux Plus Handspray for 33.737 and 33.759, Chrome Finish
  • For use with models 33.737 and 33.759
  • Kitchen handspray
  • Requires hose # 46092

I gave this product three stars not because of the quality, but just to put other customers on notice of a few issues I encountered during installation. Hopefully, I can spare others the hours it took me to get this installed correctly.

As far as delivery and price go I purchased through Amazon directly with my prime membership. I was pleased with how quickly the part came. While I have a hard time swallowing the $82 price tag for a piece of plastic, at least I didn''t have to pay the almost $150 list price.

I have a Grohe Ladylux plus faucet (the one that swivels) that was installed just prior to my moving into this house in 1999. I don''t believe any owner''s manual was ever left for us, but if it was, it is long gone. A number of years ago, my (ex) husband had to take apart the faucet to either fix or replace the cartridge. I don''t recall how good the water pressure was before that, but for the past several years, the water pressure has been very weak. Anyway, when he fixed the faucet years ago, a leak occurred in the top of the sprayer handle where the buttons are. Somehow he was able to use putty and get the sprayer back in working condition without leaking. I had forgotten about this when, a few months ago, I decided to mess around with the spray handle in order to improve my ever-declining water pressure. (I''ll spare you the details, but I was following some advice I found online.) Long story short, I ended up making the situation much worse.

About a week ago, my water pressure dropped to almost nothing. I really had to do something. After hours of searching online for help troubleshooting, I finally figured out that the problem was a water flow regulator in the quick connect coupling. Once I took care of that problem, I had great water pressure which was now spouting out the top of the spray handle. Time for a new sprayer! (You really can''t seem to get replacement parts).

I was very excited to receive this replacement, and it looked great. First problem, however, arose when I opened the box to find two plastic capsules. They seem to be flow regulators one was white, the other yellow. I knew they were to go into the spray handle, but I didn''t know which one to use, or whether they both went in, etc. The instructions were little to no help. I spent an hour and 1/2 online trying to find information about these parts, which one should be installed with my unit, etc. I found nothing. So, finally I just decided to try them. I first tried the yellow. The handle leaked from where it connects to the hose. Then I tried to put the white one in with it both didn''t fit. (That answered that question). Finally, I took out the yellow one and put in the white one which, to be fair, most closely resembled the piece in my old handle. At first it didn''t seem to leak as much as with the yellow regulator in, but it did also leak. (Oh, and a tip each of these pieces has an arrow etched into it from what I could read on the instructions, you should install the regulator into the handle with the arrow pointing up into the handle and away from the end of the hose.) Both the yellow and the white pieces seemed to work, though I do believe there was water backed up in the handle behind the yellow valve when I unscrewed it from the hose. I still don''t know what the difference is between the two parts, but I mention my experience in case you end up just as stumped as I am and can''t find information online regarding your particular faucet model.

About the leak others have mentioned it, and I do believe it is just a result of this replacement piece being a hair roomier than the older handle. But it is something that MUST be dealt with immediately or you will have water running down the hose and under your sink. I was able to find an O-ring at Ace Hardware that did the trick. The o-ring that worked for me is the #54 ring made by Danco, Inc. Measurements are 11/16 x 9/16 x 1/6 (I''m sure Grohe products are metric, but the store didn''t seem to have any metric o-rings, and this seems to be working fine for me) and the Stock number is 35768B. I think I paid about 50 cents for it, but it is also available online. Here is one link that is active as of the time of this review. http://www.amazon.com/Danco-54-O-Ring-Bag-35768B/dp/B000UF0P46/ref=sr_1_1?ie=UTF8&qid=1337982310&sr=8-1

Now that it is installed, I am really happy with my new sprayer (will be even happier once I get my drain pipes fixed.) Hope this helps!

Buy Grohe 46 298 IE0 Ladylux Plus Handspray for 33.737 and 33.759 Now

I had 15y old grohe kitchen faucet. Handle started to leak. This model fits fine, looks better, and seems to work fine.

Read Best Reviews of Grohe 46 298 IE0 Ladylux Plus Handspray for 33.737 and 33.759 Here

The right thing was delivered on time. No problems with the seller.

I wish I could say the same for Grohe. I downloaded their latest parts lists and diagrams for this faucet and its parts. The part numbers on their documents don''t match what I find on the web. For example, the quick disconnect coupling at the end of the flex hose Grohe 46 092 000 Pull-Out Spray Replacement Hose, StarLight Chrome (opposite end to this spray head) is number 46315 on their diagram, but number 46138 in the current parts suppliers (or another number for a green one with a flow restrictor).

The handspray was delivered with two cartridges, one black and one green. If the numbers on my parts list are correct the black one is 08567 and the green one is 64689. Only one of these is to be used, apparently, and there are no instructions as to which to choose and what the effect of the choice is.

So my complaint is with Grohe, for lack of instructions and documentation, and inconsistent part numbers.

Good luck.

Want Grohe 46 298 IE0 Ladylux Plus Handspray for 33.737 and 33.759 Discount?

I''ve had this unit installed in a kitchen faucet, where it gets constant use, for about 4 months. So far it has worked very well. Note--it projects water farther from the faucet base than the original faucet did. The original faucet projected water straight down, more or less.

This unit is made of plastic, which may turn off some people. But I''ve had no problem with it, and it is lighter and more maneuverable.

Save 49% Off

perfect fit

great service from Amazon

Should have replaced the handspray a long time ago.Didn''t think it would be as easy as this was