Showing posts with label fxhtc water filter. Show all posts
Showing posts with label fxhtc water filter. Show all posts

Set of 2 PF-4 Fluoride Replacement Filters for Berkey Ceramic Filters Save 17% Off

Set of 2 PF-4 Fluoride Replacement Filters for Berkey Ceramic Filters
  • Set of 2 Berkey PF-4 Replacement water filters. Reduces fluoride, arsenic, MTBE, Lead
  • For use with gravity filter systems that use ceramic filters
  • Will fit on British Berkefeld and Doulton ceramic filters
  • Used as a post filter, these screw onto the bottom of your ceramic filters
  • Will NOT fit Black Berkey filters.Only fits white ceramic filters.

PF-2''s are useless PVC placebos so chances are these are just the same.

I wanted these fluoride filters to work, I really did.

After running 15 gallons of city tap water (with an average ppm fluoride content of 0.30 to 0.60) through 2 x Berkey black filters and 2 x PF-2 fluoride filters I sent this sample of "filtered" water to 3M Industries for a fluoride concentration test. The results confirmed that these so-called "fluoride filters" DON''T actually filter out very much fluoride at all, if any.

3M Lab Result: 0.36 ppm of FLUORIDE (remaining in the water filtered through these PF-2 "fluoride" filters).

"The fluoride concentration result for the sample you submitted is listed above. This result was obtained using state-of-the-art equipment for accuracy. The method of testing is the fluoride ion selective electrode." (3M)

So if you just want to KEEP the fluoride in your "fluoride filtered" drinking water while adding some PVC leach-age with a sprinkling of aluminium into your drink, go ahead and blow some $$ on this rubbish.

Alternatively you could go and buy some plastic pipe fittings from the local hardware store, throw in some aluminum shavings and hang those in the "filtered" water chamber of your Berkey for a mere fraction of the cost.

Buy Set of 2 PF-4 Fluoride Replacement Filters for Berkey Ceramic Filters Now

you have to follow instructions and flush those under pressure to clean them up before first time use. Be sure to order a set of 2 (4 filters) when ordering with a new berkey filter. Each of those connects to the top filter which you have 4.

Read Best Reviews of Set of 2 PF-4 Fluoride Replacement Filters for Berkey Ceramic Filters Here

First of all, the PF-4 Fluoride filters came without so much as an instruction sheet. I had to remove the blue inserts at both ends of each PF-4 filter and try to figure out what to do to attach them to the ceramic filters. After hooking them up to the ends of the two ceramic filters that were protruding into the bottom Berkey chamber and securing them tightly, I allowed the water in the upper chamber to filter through to the bottom chamber, not once, twice or thrice, but four times. The reason being that I was consistently getting an oily looking, murky, contaminated mess in the bottom chamber. In fact, the unfiltered water in the upper Berkey chamber was crystal clear and drinkable, though fluoridated, as compared to the filtered, yucky looking product that was being produced in the bottom chamber. Thank goodness I had enough common sense to check the content of the bottom chamber each time rather than blindly pouring and gulping down a mouth full of murk. I even did a fifth run the day after the previous day''s disappointments, but to no avail. Nothing drinkable at all! I kept getting filtered murky water, instead of filtered Berkey water. How much patience should one have? In desperation, I decided to detach the two PF-4 Fluoride filters from the ceramic filters, and allowed only the ceramic filters to filter the water. At last! It was then and only then that I finally obtained crystal clear, clean, drinkable water in the bottom chamber. Thus, the Berkey ceramic filters worked perfectly, but not the PF-4''s. I am therefore justifiably returning the malfunctioning PF-4 Fluoride filters for a well-deserved refund.

Tully''s Coffee Decaffeinated French Roast

Tully''s Coffee Decaffeinated French Roast, Extra Bold, 24-Count K-Cup for Keurig BrewersThis is the best coffee that we have had for our Keurig. It''s full flavored with no bitterness and easy to drink black. After trying others, we keep coming back to the Tully''s French Roast.

I have to drink decaf coffee for health reasons; and, frankly, a lot of them leave a kind of after taste. Tully''s was really AWESOME!!! If you haven''t tried this coffee yet, give it a shot. It''s REALLY good!!!! The French Roast Decaf has a smooth flavor, and this coffee is one I will DEFINITELY buy again!!!

Buy Tully''s Coffee Decaffeinated French Roast Now

My doctor order me to cut caffine. I hope this is swiss water process decaf.

I like strong coffee. This has a bold body. It taste great. If you like starbuck coffee, you would like this. Strong.

Read Best Reviews of Tully''s Coffee Decaffeinated French Roast Here

I like a fairly strong cup of coffee. Since it''s French Roast, and labeled as Bold, I assumed that Tully''s version would be. Unfortunately, to me, at least, it''s pretty weak stuff. It may be better if your Keurig can be set to brew a small cup size...ours is fixed at roughly 8 oz.

I personally prefer:

Timothy''s World Coffee, Rainforest Decaf Espresso Extra-Bold for Keurig Brewers, 24-Count K-Cups (Pack of 2),

Coffee People Extra Bold French Roast Decaf for Keurig Brewers, 24-Count K-Cups (Pack of 2) and

Emeril''s Jazzed Up Decaf Coffee for Keurig Brewers, 24-Count K-Cups (Pack of 2) for decaf coffee.

For caffeinated, I like Coffee People Organic, Extra Bold K-Cups for Keurig Brewers (Pack of 50) [Amazon Frustration-Free Packaging],

Coffee People Santa''s Buzz K-Cup for Keurig Brewers, 24-Count K-Cups (when it''s available), or

Emeril''s Big Easy Bold Coffee for Keurig Brewers, 24-Count K-Cups (Pack of 2).

I think all six have much better flavor than Tully''s French Roast.

Want Tully''s Coffee Decaffeinated French Roast Discount?

This is the best decaf that I have found thus far. It taste very close to regular coffee.

All Purpose Cleaner Spray+Wipe 32 Ounces Save 1% Off

All Purpose Cleaner Spray+Wipe 32 OuncesAfter trying numerous natural cleaners, you begin to realize that many are all-purpose, but some just won''t do every task. If you run out of one cleaner, you can''t always use another to do the same task. With one bottle of Bi-O-Kleen, you can literally clean everything in your house. This product will even clean mirrors to a streak-free shine. You can use it in the kitchen, bathroom, on walls, for carpet cleaning, to remove laundry stains, clean stainless steel and chrome, shine up plant leaves and even clean toys, RVs, Cars and Boats.

Ingredients: Surfactants, wetting agents and degreaser from coconut, grapefruit seed and pulp extracts, cold pressed Valencia orange oil, linear sulfonate and filtered spring water.

This is a very safe cleaner and I feel good about using it on the floors and counters. I''m always worried about cleaners being used around my cats, but with this one, I don''t have to worry because there are no harsh fumes. I used to have to lock the cats out of the room I was cleaning, but now they happily sit at the open door, watching me work.

Added Bonuses:

Guilt-Free Cleaning Won''t harm rivers, streams, plants or wildlife.

Safety Factor Won''t harm vinyl, stainless steel, painted surfaces, chrome or porcelain.

Non-Flammable unlike other orange cleaners

Neutral PH

No Animal Testing

I love that I can use this on mirrors! It won''t cause you any respiratory problems like other glass cleaners can and I think it cleans glass perfectly.

~The Rebecca Review

I have been trying "greener" products for a few years, but I haven''t been to terribly successful. This All Purpose Spray and Wipe Cleaner delivers! It cleans everything without leaving a residue and it doesn''t have a strong scent (a big complaint I''ve had with a lot of the products I''ve tried). My husband and my kids even noticed what a fantastic job it does. Finally, a product that works as promised and that I can feel good about using!

Buy All Purpose Cleaner Spray+Wipe 32 Ounces Now

this is a great natural cleaner that doesn''t affect my chemical sensitivities. no fumes and works well!

Read Best Reviews of All Purpose Cleaner Spray+Wipe 32 Ounces Here

OK the cleaner itself, I give 5 starts. It is indeed all that and a bag of chips so to speak.

However, I''m sensitive to salicylates and something in this gives me awful respiratory reactions when I spray it. "Chemically sensitive" does not mean that every non-toxic, natural thing is OK (I''m allergic to aspirin, so aloe is a problem, etc.)

That isn''t the fault of the cleaner; the 3 stars is because if you''re having it shipped, buying the spray is silly. Much better to buy the 32 oz concentrate. Then you can mix it in a spray bottle at home, and you can use it in different strengths for different tasks.

OR, if you''re like me, buying the concentrate and not the spray means you can dilute it in a dish and dip the rag in -no spraying means no inhaling. Since it bugs me I wouldn''t want it in the air around my pets or baby.

Want All Purpose Cleaner Spray+Wipe 32 Ounces Discount?

Watts 116054 Standard Faucet

Watts 116054 Standard Faucet with Air Gap, Stainless
  • Air Gap faucet to meet plumbing codes for reverse osmosis units
  • Meets all low lead NSF requirements
  • Multiple colors available for custom kitchens
  • Fits all under counter reverse osmosis water filter systems
  • Uses 1/4" Supply Tube

BEFORE YOU PURCHASE--if your old faucet is just leaking or making noise, see "maintenance" below.

QUALITY

The faucet is good quality. I used it to replace an identical one which had operated flawlessly for 20 years.

STYLE

The design is very convenient: The lever has three positions, 1) UP = open (conveniently for filling a pot), 2) closed, 3) DOWN = press-open, which is convenient for filling a glass---even with the hand you are holding the glass. Many more expensive faucets are "crank open" / "crank shut. The "giraffe neck" rotates 360 degrees, and so, if installed at the corner of a sink (or elsewhere), can fill a pot placed on the counter.

WHAT''S INCLUDED / WHAT''S NOT INCLUDED

Included: the faucet itself, hardware to install in the counter-top, and fittings to attach the blue tube to the faucet. NOT INCLUDED: any fittings to attach the 3 water tubes to the filters, drain, etc.

SUPPLIED INSTRUCTIONS

NO MEANINGFUL INSTRUCTIONS are included, and are incomplete for this faucet. The instructions printed on the box are for several different types of faucets, do NOT show you how to attach the blue tube, and do not helpfully identify the red and black tubes. If I had tried to install the faucet following the "instructions" I would have installed it wrong. Solution: Install the faucet according to the instructions which came with your water filter system, exactly as your previous faucet was installed.

INSTALLATION SUGGESTIONS

Note that you can install it as shown on the photo, or reversed with the lever toward the sink (which I think is more convenient).

Turn off the water supply to the water filter which is attached to the faucet you are replacing; open the old faucet an let it drain until no more water comes out (the same steps you''d take for replacing filters).

Blue tube: attach to the "stud" on the bottom of the faucet with the supplied fittings (nylon ferrule and compression nut)

Red tube: pre-attached, "brine input"

Black tube: pre-attached, "brine output"--i.e., waste water line to your kitchen sink drain-line

You will probably have to remove part of your osmosis system to gain access. When disconnecting your old system, label each connection you disconnect on both sides. Use a 2" to 3" strip of painter''s tape and fold it over in half to make a tab to write on (and use a permanent marker). Number the connections 1, 2, 3, etc. Remember to label BOTH sides of the connection with the SAME number (1 connects to 1, 2 connects to 2, 3 connects to 3, etc.). Disconnect as few water lines as you can. As a backup, take closeup photos with your digital camera of every connection which you plan to disconnect AFTER labeling and BEFORE disconnecting.

Preparing for installation of the new faucet. Assemble the spacer, washer, and nut on the faucet (leave about 1/2" for the thickness of your counter). Install the blue line on the faucet using the supplied hardware (a nylon ferrule and a compression nut). It is a good idea to install the fittings on the other ends of the tubes at this point (you will probably have to reuse them from your old faucet connections).

Lower the tubes through the hole in your counter-top, until the new faucet is in place. Decide on which direction you want the lever to point. From underneath, slide the "split washer" in place between the counter-top and the spacer, and tighten the nut. (You should have the right size box wrench ready--space and visibility are likely to be very tight, and it is hard to determine what the right size is blindly. Alternatively, you can use a deep socket wrench (if you have one of the right size), and install the blue tube later. Many faucet installation kits include such a socket--this one doesn''t). Note that the space may be very right---pliers or an adjustable wrench probably won''t work.

Attach the blue and red tubes to your filter system and the black tube to your sink drain. It is best not to cut the red or blue tubes, even if they are too long, because their length provides easier access to the system for maintenance (you can move the tank and/or filters temporarily without disconnecting the lines). However the black drain tub should probably be cut so the waste water flows straight to the drain, without a dip in which the waste water can collect. Ideally, the black waste line should be as short and as steep as possible. Important: if you must cut a blue or red tube, cut it with a very sharp blade (such as a utility knife with a new sharp blade), absolutely perpendicular.

FIXING LEAKS AFTER NEW INSTALLATIONS--see also "maintenance" below

After installing the new faucet, you should monitor the system for at least 12 hours for leaks--they can develop slowly. If there is a leak you can''t find, tie strips of paper kitchen towels around the tubes and place paper towels at other strategic points; check after about 15 minutes and the source of the leak should be obvious.

Although the fittings are designed to install without plumber''s thread tape, or plumber''s paste, if after reasonably tightening them, they still leak, then plumber''s pipe tape or paste will help. You can use "Plumber''s Goop" on the threads rather than traditional plumber''s pipe paste. For Goop to work best, the fittings should be dry before you assemble them. Eclectic Products Inc 3.7Oz Plumbing Goop 150011 Thread Tape & Paste

If that fails, you can use a blob of "Plumber''s Goop" on the outside of the fitting as a sealant to stop the leak. In the latter case, you MUST allow the "Plumber''s Goop" to harden for at least TWO FULL days before turning on the water to the filter/faucet. Plumber''s Goop used this way can be reinforced by embeding dental floss in the wet glue. I sometimes use Goop as a backup on fittings that are NOT leaking, but using Goop this way can make the connection difficult or impossible to disassemble at some later time.

NOTE that a tiny leak in any part of your kitchen plumbing can easily cause hundreds (even thousands) of dollars worth of damage. A leak detector is strongly recommended. Zircon Leak Alert Electronic Water Detector, 1-Pack Such a detector warned of a leak in my hot-water-heater cabinet before irreparable damage was done.

ROUTINE NOISE

In normal operation the air-gap causes a dripping noise (usually for about 5 to 15-minutes immediately after using a quantity of water from your reverse osmosis system). If the water supplies an ice-maker, you can hear the dripping at other times. According to the Watt company, most of that noise is actually the waste water splashing into the pool of waste water in the elbow below your sink---so (according to Watt), a heavy nylon fishing line in the black waste water line leading into your sink drain and down to the elbow can minimize the noise, providing a path for the waste water to flow, but I have not tried that, because the noise doesn''t bother me. Theoretically, a sink strainer in the closed position should completely muffle the sound (but I use a simple screen instead which catches more stuff). Besides, the dripping sound is a good way to monitor that the system is working properly.

MAINTENANCE

After about 6 months of use, the black waste-water tube can become clogged with a bacterial mat. If you pay attention, there is an odd choking gurgling sound when the tube is almost clogged. When it is clogged, the waste water will leak from the faucet itself out onto your counter. Note that it is actually designed to do this, which is why instructions usually specify mounting the faucet at the edge of a sink (assuming that most of the overflow will flow into the sink). The solution is to regularly clean the waste-water tube. The best way I''ve found is with an 18" length of "weed-whacker" cord. Detach the tube from your sink waste-line, and feed the "weed-whacker cord" into the tube and scrub it out. If you''ve had a root-canal procedure, you know how it''s done. Note that the bacterial mat is a nasty sludge---have an old cloth towel handy to catch the gunk. I recently purchased a "beer line brush" Draft Beer Line Hose Cleaning Brush: 3/16" diameter, which works well---the 1/4" diameter model would probably also work.

Since physically cleaning out the gunk the last time, I''ve been sqirting a few drops of Clorox into the air-gap hole (in the faucet housing). The follow bottle, which works well for this purpose is $3 at the Container Store Nalgene Plastic Drop Bottle. Note that on this and similar models, the air gap is beneath the lever, opposite the girafe neck. For access, pull the girafe neck up, and slide the lever forward (in the direction of the girafe neck). The "air gap" is the hole which contains the black plastic insert (leave the plastic insert alone, it is the tiny "faucet" where the the red water line discharges into the air gap). To reassemble, push the lever backward (in the direction of the air gap), so that the legs slide under the "T", and then push the girafe neck back into place. In the more recent models (those which are domed cylinders without the flat sides), the air gap is accessible, a hole on the back side---perhaps for the very purpose of making the air gap easier to sanitize.

LEAKING (see also "maintenance")

If the faucet leaks ONLY when you are using it (usually after 10 years or so off use), then the problem may be the o-ring seals. You can just pull the "giraffe neck" straight up, and replace the o-rings. LIGHTLY lubricate the o-rings with silicon grease. Permatex 22058 Dielectric Tune-up Grease 3 oz. It is a good idea to dab a little bit of the silicon grease where the lever rubs against the giraffe neck to minimize wear---and for noticeable smoother operation. If you don''t happen to have a tube of silicon grease, buy one---it is terrific for rejuvenating any rubber items and for improving electrical connections---even fixing computer problems.

DON''T PANIC

Yes that nasty sewage-like sludge in the waste line is scary stuff---but the "air gap" is a separate system with only shares the faucet structure---the good water supply is entirely separate from the "air gap" system. What about the possibility of the "contamination" growing it''s way into your reverse-osmosis filter?---"theoretically" it shouldn''t get past the air gap---but you could install an "inline check valve" in the red tube to minimize the possibility. If your reverse-osmosis waste-water line did not drain into your sink-waste pipe, then your reverse-osmosis waste water line could not get contaminated by the sludge growing in the elbow in the sink-waste pipe, and would not make even "routine" noise---hint.

Buy Watts 116054 Standard Faucet Now

I bought this faucet to replace the faucet with LED indicators that came with my 5-stages RO system from Watts Premier. I installed this faucet in a granite sink countertop. I had to cut the white plastic spacer by 1/4 inch to compensate for the width of the countertop. The brushed stainless steel matched the main sink faucet. Replacing the old faucet was not difficult at all.

Now I have my water system on top working condition.

Read Best Reviews of Watts 116054 Standard Faucet Here

Update: 3/26/11, This faucet has been fantastic. This is a high quality faucet. Love the look of stainless/nickel. Not sure why a couple of people have complained about grease on or in the faucet, mine was very clean with no grease at all.

Received my order today, It was the correct type, a Standard 3-Tube Air Gap Faucet for RO systems. The product is of high quality and exactly the type of faucet I expected.

Just an FYI: due to the corrosive properties of RO water and the brine water traveling through the Air Gap Faucet you should expect to need to replace the Air Gap Faucet every several years, I have needed to replace mine 3 times in 13 years. I think the next time I will just replace the whole RO system.

I gave it only 4 stars because I don''t know for sure which product I actually received. The Box is labeled Watts Premier Part# 116054 which according to the Watts website is the "Brushed Stainless Steel Air Gap Faucet" however the UPC tag# 9935-"116054", also on the box, clearly says "Brushed Nickel Air Gap Faucet" which is Watts Part# 116101, since brushed Nickel and Stainless look so similar I am not sure it is going to matter. But I will update after install and let you know which item I think I actually received. Perhaps Watts sells the same faucet under two descriptions and prices.

Update: I am fairly certain the faucet I received is Stainless Steel, even though the description on the box says "Brushed Nickel"

Want Watts 116054 Standard Faucet Discount?

Received this item in a short amount of time. Very pleased with it as it is exactly the same as the one that came with the original osmosis system. Product came as described on your website !

The faucet was easy to install with simple connections. It did what it was supposed to do.

BestAir CB45 Essick 1045 Replacement Wick Filter Save 19% Off

BestAir CB45 Essick 1045  Replacement Wick FilterProduct important to keep house moist during the winter season. The filter helps do that. Product is great and service is great. Thanks!

Just what I ordered in a few short days. The packaging was too big for the item and it rolled around in the oversized box, but wasn''t damaged.

Buy BestAir CB45 Essick 1045 Replacement Wick Filter Now

This filter looks like the original filter but it doesn''t perform like a true original equipment filter. I could only get 26% humidity out of it. I finally gave up and replaced it with an original filter which provides at least 36 40%.

Read Best Reviews of BestAir CB45 Essick 1045 Replacement Wick Filter Here

Not much you can say about a humidifier filter. It works as intended, does not fall apart, fits my humidifier perfectly, and gets all crusty and gross but then it''s supposed to.

Want BestAir CB45 Essick 1045 Replacement Wick Filter Discount?

Mint Plus Automatic Floor Cleaner with Charging Cradle

Mint Plus Automatic Floor Cleaner with Charging Cradle - Model 5200CLOVE IT!! I have a six month old bullmastiff puppy who tracks in mud/dirt/rain/snow all day long. I can put her down for a nap, run "Alfred" and the mess is gone in no time. We have two different types of hardwood floors as well as textured tile.

This is essentially a Swiffer on steroids. It does not get the textured tile scrubbed, but it does get the surface grime gone. Run it once with the dry cloth (got all the dustbunnies from under the couch), then load the scrubbing pad with whatever you normally use to clean your floorvinegar and water, Bona, Armstrong, Mr. Clean, whatever. Turn on the mop feature and off it goes. About half way through the cycle, I remove the pad (it just pops off held in place with magnets, takes all of 15 seconds) and turn it the other direction, which gets both sides of the cloth working. It is is sooo quite!

I''ve had no problem with it finding the cube, it covers most of the floor, it occasionally misses some spots, but nothing drastic. The charge holds for both sweeping and mopping the living room (24'' x 17''). Then I recharge for about two hours and it will do the kitchen (same size) and the foyer.

The only down side is you pretty much have to use their cleaning/mopping cloths. I tried using some other microfiber cloths and they were too thick and too big which covers up the sensors, causing the robot to essentially spin in circles. I''ve been trying to find an additional three pack of just the scrubbing cloths with no luck. You can use Swiffer and other cleaning cloths with it, but I like the idea of the reusable. Cloths go in the washer with other cleaning rags, then into the dryer.

I''ve had the unit for about two weeks, I''ve run it probably ten times, thrilled with the product.

Updatehave now had the unit for three months and it''s still going strong. Starting to get a little scuffed (going under the Christmas tree was hard on it), but still love it. I did get additional cloths and they wash up great. I''m running it a couple of times a week. It stays on my dryer in an upright position, plugged in, so it''s always ready to go. Highly recommend.

First let me start off by saying we have a family of 3 very active boys and 3 very active dogs. Needless to say I cannot keep up with every drop of something that gets on the floor. That''s where this little miracle comes in!!

I couldn''t be happier with the Mint Plus. I didn''t purchase this one with the charging cradle, however I did purchase the turbo charger separately. Still waiting for that to come in so i will update my review after I use it! It comes with a mop pad and a dry pad. I didn''t know that when I bought it so I also purchased the set of 3 (2 dry, 1 wet) for $19.95 so now I''ll never run out I guess! It was so easy to set up and get started. It did take 4 hours for the initial charge, however it lasted for over 2 hours going non stop! (and it was in a large area) It evens comes with an easy set-up instruction card. I''m usually horrible when it comes to electronics and I figured it out with no problems! I was kind of skeptical at first with running something around the dogs that looks like it could be a toy for them, but after some sniffing and following they were bored with it. :)

We live in Arizona (sand, dirt, dust, sand...and did I mention sand?) so consistently clean floors doesn''t happen unless I vacuum and mop every day and who has the time for that these days? For those of you who think this should work like a steam mop or a scrubber, you''re going to be disappointed. This is made to keep your floors looking clean in between deep cleaning and it works just as advertised in my opinion!! It took off all dirty paw prints and daily foot traffic off my tile and left it streak free with just water! (Something my steam mop doesn''t even do) I have a dog kennel, table and chairs and other nooks and crannies in my kitchen/dining area and it didn''t beep once because it was stuck. Does a great job on its own navigating difficult areas.

Like I said previously I only used warm water in the tank, but I think next time I might put in a few drops of scented floor cleaner. Just for the smell. The tank isn''t large so I did have to add water after an hour or so. If you have a smaller area it should work fine on one tank. Also I already washed and dried the mopping cloth in my machines and it came out perfect! No pilling, snagging, shrinking or anything that I noticed. It says on the box that it''s compatible with Swiffer dry pads. Haven''t tried them yet, but the way they hook in is just like on my old swiffer so I bet it works.

If you''re looking for some extra help around the house that will pay for itself in the long run, I would highly suggest the Mint Plus!! Worth every penny!

Buy Mint Plus Automatic Floor Cleaner with Charging Cradle Now

Pros:

It is quiet.

Like the tracking system.

Easy to use.

Would be good for people with limited mobility when it is difficult to vacuum and mop.

Economical if you use the washable cleaning pads.

Doesn''t catch on furniture like Roombas.

Seems to be cleaning well if you do it over and over and over.

Using it does allow me to do other things and leave the mopping to Mint.

Probably good for apartments or condos, not homes over 2000 square feet.

Cons:

I think it is very Overpriced for what is does.

Slow slow slow, even on tile floors.

Have to change pads, charge, clean, change pads, a few times just to clean my large living room.

Cannot add cleaners to water solution so it cleans with only H2O in its little water tank. Option is to buy those expensive Swiffer pads.

Needs to change cleaning pads often to make sure it isn''t just smearing dirt.

Not suitable for large rooms because battery runs down before finished.

I have owned a Roomba for another house and it did great vacuuming carpet for in-between house cleaning days. I prefer Roomba for vacuuming my house over the Mint, but Roomba is too noisy on tile. Since I loved Roomba, I researched reviews on the Scooba, but it scores very low. Mint had a higher customer rating overall.

I guess robotics have not mastered mopping floors.

I was going to return it because it just isn''t fast enough to clean all my tile floors and I certainly don''t want to buy two of them to try to get the job done. The return policy is only good if package is unopened. If I had bought it from Walmart.com and had this disappointment, I could have returned it.

I am a Prime subscriber and love shopping Amazon. I frequently order items from Amazon and this is my first disappointment. I ordered Mint because of so many positive reviews.

I agree with another customer, if you accept that you are paying $$$ for a robotic Swiffer and not a technological breakthrough for house cleaning, it won''t disappoint. If you don''t like Swiffer cleaning you will be disappointed with this.

Good concept, but not there yet.

Read Best Reviews of Mint Plus Automatic Floor Cleaner with Charging Cradle Here

Listen guys I made a REAL thorough search for a decent robot before I got it I mean I did this 24h/d for like 2 weeks I went to a billion of friends and listened to all their robots and saw how they all work.. I decided to go for the mint for reasons I will soon provide. Just let me start and say that my wife was skeptic and didn''t want to hear about a robot but now she adores Alfred our Mint plus makes me feel like batman ;).

I found several reasons why I''d rather use this and not any other robot, this is individual but it fits us like a glove:

Advantages

--------------------------------------------------

1. Quiet [!!!] we have a 1.5yo daughter who makes all the mess and spill all the liquids in the world all day everyday. since we can''t clean when she''s up, we clean when she''s asleep and Alfred cleans just about a billion times quieter than we do. plus he work in complete darkness so he enters her room and cleans it too. it does make small sounds when it bumps into stuff but this isn''t enough to wake her up :D by the way with the roomba and its lookalikes there are no bumping sounds the vacuum sounds is oh so unbelievably loud you can hardly hear anything ;)

2. Quick it doesn''t move quickly, but it works efficiently I had to say I watched roomba and its lookalikes in all my friends'' houses and I was just so annoyed with how slow it works I haven''t watched the Neato which I heard should be efficient as I figured its too loud for us anyway but all the others seem to just test my patience they take ages to clean a room.

3. Wet Clean after Shabbat the floors look just about like hell :) there are many many stains all over the place. the first time we gave him such a task I couldn''t believe we''ll see any results I even waited to see it couldn''t handle one of the stains and went to the computer room all frowning about the bad purchase but boy when it gave the finish tune and I got to the living room I was A-S-T-O-N-I-S-H-E-D it appears the stain I spotted was just impossible to take off (I tried with my finger and couldn''t do it too) but all the rest was sparkling!! this really made me trust Alfred more and made my wife crazy in love with it!

4. Not-Too-Complicated one of the things I don''t want to happen is malfunctions! the way mint works is very simple and very understood and seems the least malfunction-potent of all the vacuums and even the scooba it simply is a smart moving robot you can do whatever u want with it if someone made a nice domino dropper with it he could fill his house with domino cubes and make an awesome domino effect :D I like to know how stuff work

5. Goes below furniture this really is great! we don''t like Alfred''s dry-cleaning function as we can quickly sweep ourselves but we do let it go below our bed and take the huge masses of dust hiding there :)

Disadvantages:

--------------------------------------------------

Doesn''t go to it''s charging cradle scooba doesn''t do that as well but its nice how the roomba and likes do it

No scheduling this is really reasonable since I wouldn''t like it to clean with the same cloth twice :P

No smart room blocker sometimes when we want it to clean only a certain area we close the doors leading to others

No huge range our house is relatively small so a good position to the cube gives me full coverage but largers houses need to buy extra cubes don''t try running without the cube it doesn''t work too well..

The dry-cleaning (sweeping) isn''t really effective it works okay but leaves some dust behind

Summary:

--------------------------------------------------

If you''re looking for someone to clean your house with a damp cloth you''re going to fall in love with this pretty toy.

It is great for people who work from home or for housewives as unlike vacuum robots it won''t blow a hole in their minds with noise.

We''re most satisfied with it [!]

Want Mint Plus Automatic Floor Cleaner with Charging Cradle Discount?

Just got my Mint Plus less than an hour ago. Can''t say much yet as it''s charging. It''s packaged extremely well and every part is labeled very clearly and easy to understand in the packing. Very little packaging too! I wish everyone took a chapter from Mints book on using little and smart packaging.

My main point to review this before I''ve used it is to warn before you buy extra cleaning clothes for it the box came w/ a total of 4.

2 dusting and 2 mopping. The description on Amazon failed to mention how many are included in the box.

What comes in the box:

Mint Plus Automatic Floor Cleaner

North Star Navigation Cube (2 C batteries included)

Pro-Clean Reservoir Pad

Multi-Purpose Cleaning Pad

2 Reusable Microfiber Sweeping Clothes

2 Reusable Microfiber Mopping Clothes

I bought this unit (5200C) because it was on a great sale and included the charging station.

What I got was the Mint Plus for the same price with out the charging station. It still charges the same way it would seem but doesn''t have the little cradle you''d just plop it into to charge. Not a big deal as it still stands up and is plugged in the back but I did order the unit w/ the cradle.

Contacted Amazon and we''ll see what happens. If I''ve got to send the whole thing back just to get the cradle I''ll probably just opt to keep it instead.

Mint and Amazon did a terrible job in the description of this little guy. A simple search on it and I found a ton of reviews on it from other people and Mint itself along with some great video demonstrations for it that convinced me to buy it.

Although it''s advertised to clean up to 2000 square feet dry sweeping you have to have an additional cube for that. Otherwise with the included cube it will do 1000 square feet.

I think I''ll save myself the extra $40 and simply move the cube and Mint when I''m ready for it to do an extra room or area and block the first area off w/ a broom or something.

Update;

The silly charging station was included thanks whoever told me to look closer at the box. Yep, there it was stuck on the bottom very well hidden.

We''ve moved into a large house with no carpeting at all. My main reason for purchasing the Mint.

The house was filthy when we moved in. The previous owners had 11, count them. 11 dogs. 9 of them Yorkshire Terriers to boot. Boy those little buggers do like to shed.

Ran my vacuum to suck the major dog hair up before we moved boxes in and try to get the bulk of dog hair up.

In the last week we''ve been here I run "Mindy" at least once a day, she very quietly goes about her business first thing in the morning while I make coffee and breakfast for my 4 dogs and cat. 2 of the dogs are shedders and someone in their infinite wisdom painted the wooden floors the color of milk chocolate so every bit of dog hair shows.

I was amazed after the first run she did how much of the old dog hair she''d found that I''d missed w/ the vacuum. She does her job dutifully and well.

I''m thrilled w/ how well the dust pads work, the dust pads are reversible so you can get quite a bit of use out of one before you need to start w/ a clean one.

The mop pads are not reversible but do have a nice loop to the pad to do a bit of scrubbing.

I''ve had no issue of her getting stuck other than once she found a gap big enough to scoot under and got stuck under a large area rug. Took me forever to notice the big lump under the rug when she was calling for help.

The mopping attachment holds quite a good bit of liquid. So far I''ve only used plain water which was done wonders for the paw prints etc.

She does not navigate the perimeter of the room as the website demonstrated. I don''t know what her deal is there but not a big issue as she does hit every bit of the room.

I run her every day sometimes twice depending on how much the dogs have tracked in and how many shoes have tramped through the house. And mop every other.

She does not replace a good sweeping and mopping but for the maintenance in between she''s a life saver and has kept my free to unpack boxes and put my new house together. I''d kiss her on the lips if she had any.

DuPont WFFMC300X Ultra Protection 200-Gallon Faucet Mount Water Filtration Cartridge Save 11% Off

DuPont WFFMC300X Ultra Protection 200-Gallon Faucet Mount Water Filtration Cartridge
  • 200-Gallon Filter Capacity
  • Advanced Four Phase Protection and Filtration Systems Improves The Quality and Taste Of Your Water
  • Easy to Replace with Color-Coded Packaging
  • Also Available in 3-Pack Replacement (FMC303)

I found this brand filter the best buy from the others on the shelf. You can''t beat 200 gallons for about 15 bucks. The 100 gallon size costs almost 11 bucks so the 200 runs about $7.50 per 100 gallons. Not bad for a faucet mount.Gets a 4* rating. Can''t give It a 5* because It just cannot give you 100% pure clean water.

Buy DuPont WFFMC300X Ultra Protection 200-Gallon Faucet Mount Water Filtration Cartridge Now

I used to use brita pitchers, but always had trouble keeping track of when they needed changed. I grabbed a faucet dispenser (DuPont WFFM350XBN Electric Metered 200-Gallon Deluxe Faucet Mount Premium Water Filtration Filter, Brushed Nickel) for this filter because it kept a log of how much water you used, and that was about 2 years ago. I can no longer find replacement cartridges where I bought them, so I get them here.

My tastes aren''t particularly demanding, but my area water has a slight aftertaste to it that I find unpleasant, and this filter is more than sufficient to counter that. I suspect pretty much any decent filter would be sufficient for that -I imagine they all do it the same way, with a bit of carbon filtering. Hopefully it also filters out everything it says it is filtering out, but I can''t really confirm that. The main selling point for me is the meter on the faucet mount, which not only ensures I don''t inadvertently replace it too early or too late, but also helps me keep a little better track of my own water intake.

Read Best Reviews of DuPont WFFMC300X Ultra Protection 200-Gallon Faucet Mount Water Filtration Cartridge Here

This tasted bad for a while and then it exploded in the tap holder and now it shoots water everywhere.My wife and daughter just laugh at me .I think the bottom of the canister popped off under pressure. Too late to return it........

Want DuPont WFFMC300X Ultra Protection 200-Gallon Faucet Mount Water Filtration Cartridge Discount?

This is the replacement of filter. I couldn''t find it anywhere so ordered it on line. For a simple water filter, this works great. I have bought more expensive filters that didn''t do as well as this. I''m not saying that other systems aren''t better, but for the money I am very pleased with this unit.

Save 11% Off

Works very well, although lately, water seems to have some white particles, but maybe it''s because my current filter is approaching its end of life.

Mr. Coffee GTF2-1 Basket-Style Gold Tone Permanent Filter Save 40% Off

Mr. Coffee GTF2-1 Basket-Style Gold Tone Permanent FilterThis makes delicious coffee. I was skeptical that I would have plasticy or metallic tasting coffee with a metal basket, but my coffee has never had such a warm woody taste since I started using the basket. cleaning is a little hard since I have to spray all the coffee out of it with the faucet hose, but it is worth the landfull space for me to spray a little bit. also keeps from filling my valuable cabinet space with a huge box of filters, and not to mention the hassle of separating them every time I want a fresh pot!

this filter is magnificent, and much better than the cheaper ones which my friends have gotten and had metallic tasting coffee.

This definitely improves the taste of the coffee. I''ve always heard that traditional filters suck up some of the flavoring oils from the coffee, but after trying this I am convinced. I have a 10-cup Mr Coffee, and it fits perfectly -almost as if this filter were made for it.

Buy Mr. Coffee GTF2-1 Basket-Style Gold Tone Permanent Filter Now

The service was good, prompt and communication was also good about the shipping. The filter works well. we were hoping for a filter that had mesh on the bottom of the filter as well as the sides. We couldn''t tell from the photo if that was the case. The filter does have a solid plastic bottom so we were a bit disappointed. The filter does fit our Mr Coffee coffee maker and that is the important piece. We are satisfied with our purchase though not delighted.

Read Best Reviews of Mr. Coffee GTF2-1 Basket-Style Gold Tone Permanent Filter Here

This filter came free with my new Mr. Coffee. Walmart sells coffee filters 100/$1, that''s about 500 to 1000 paper filters depending on your final cost for this filter. I''ve used a similar one before. It can last over 5 years, and it usually dies when the mesh cracks from age and repeated use.

Pros

It makes a slightly stronger brew because the filter allows more oils through and in the longer run, one saves buying paper filters. Its greener to use it, since its less paper and trash for land fills.

It has a flat plastic sealed bottom, so the coffee is forced to strain to the sides, slowing the transit of hot water through the grinds like that of a paper filter.

Cons

Cleaning. You''ll use water, time and effort rinsing this filter, after tapping out the grinds.

Less grinds. The filter is smaller than the removable cup so it has less volume as a paper filter. Using 4 measures of ground coffee cause my grinds to overflow past the plastic filter and into my coffee pot.

To clean it easier, I leave the grounds in the filter to dry out. I tap the inverted filter directly on a trash can or plate, and nearly all comes off as a lump or flakes out. You can wash off the rest. Its not any more a problem that cleaning a french press.

Want Mr. Coffee GTF2-1 Basket-Style Gold Tone Permanent Filter Discount?

This is a great filter! I''ve had it for about a year, and use it at least once a day. I wash it by hand most days (which is very easy to do) and wash it in the dishwasher about once every two weeks, and it''s still in great condition. The mesh basket drips well, and yet I have never had a coffee ground in my cup since using this.

Save 40% Off

Lasko Replacement Filter THF 8 for Lasko Humidifier

Lasko Replacement Filter THF 8 for Lasko HumidifierThese filters hold up well...well enough that I just replace it once a year. I toss the old one when I put it away in the spring and start with a fresh one in the fall. I''m not sure why, but they are much cheaper ($4.50 + a few dollars s/h depending on quantity) through the Lasko''s online store at than Amazon''s current price of $20.22.

Hoover C3820 Spotter and Carpet Cleaner Save 35% Off

Hoover C3820 Spotter and Carpet Cleaner with 3 Brush Roll SpeedsI bought the "commercial" unit to get larger holding tanks, since smaller units require annoyingly frequent refills and empties. The one gallon tank on this unit is sufficient for an average sized room. The dirty water tank is also adequate. The unit is simple enough to assemble, and works well. The tanks go on and off easily. There is no doubt that carpets look much better after cleaning, and of course the dirty water attests to the fact that a lot of soil has been removed. I personally recommend a rinse after cleaning with the detergent-containing water. To do this one must empty the cleaning solution from the tank and replace it with water only. This is not inconvenient, and is actually better than those systems that enable detergent on-and-off, since it is simpler and therefore less prone to failure.

On the negative side, I was surprised that the unit did not include an upholstery accessory, especially since the instructions for that are included. Also, it has fittings to accommodate the accessory. I spoke to the Shoplet representative about this, and after some discussion they agreed to send a new unit, from which I could remove the missing parts and return the rest. The new box arrived promptly, but also contained no upholstery accessory. It appears that for some unknown reason Hoover is shipping these out without the accessory, although it had been sold as a "carpet and upholstery cleaner" on Amazon. From the Shoplet representative I learn that Hoover says it is a carpet cleaner only, despite the aforementioned instructions, pictures, and fittings that are in the box and on the machine. You figure that one out. Shoplet gave me a partial refund, and that is the end of that. If you want an upholstery cleaner, look elsewhere besides this Hoover machine.

As another negative point, there is a clip on the cleaner handle to help hold the wire off the floor, but it is almost impossible to get the wire in it, and when you do it will pop out the first time you step on the wire. I solved this with a piece of duct tape to hold the wire more securely.

I haven''t had the unit long enough to comment on its durability.

I bought this from Sears, which was my first mistake. When we got it assembled, I followed the instructions on filling it with hot tap water and waited ten minutes. When I began using it, what came out of the machine was colder than the tap water I put in. I called the Hoover customer care number to ask how you make actual steam come out of the SteamVac and was told (and I quote) "Oh, that''s just the name."

Sears, in its ongoing campaign to gouge as much money out of the buying public as it can before going bankrupt, charged me a $30 restocking fee because I had already opened the box. When I asked how else a customer is supposed to know that the SteamVac Carpet Cleaner neither steams nor cleans, the conversation ended.

Buy Hoover C3820 Spotter and Carpet Cleaner Now

I was a little skeptical after reading mixed reviews, but am really happy I ordered this cleaner. I normally have my carpets professionally cleaned, but decided to use this cleaner "in between" cleanings. I was able to get stains out that the professionals could not get out!! I will save my money and forego the professionals and do it myself from now on. I used the carpet cleaning solution that came with the unit and dissolved a scoop of oxy clean.

Read Best Reviews of Hoover C3820 Spotter and Carpet Cleaner Here

THIS MACHINE DIDN''T WORK FROM DAY ONE. IT MAY HAVE BEEN A LEMON. IT WOULD DISPENSE THE SOLUTION, BUT IT WOULDN''T SUCK IT UP. ONLY HOOVER PRODUCT THAT DISAPPOINTED.

Want Hoover C3820 Spotter and Carpet Cleaner Discount?

It really works great, I like it a lot. But the only thing is that it doesn''t come with the upholstery.

Save 35% Off

iSpring 7-Stage 75 GPD UV Ultra Violet Alkaline Mineral Reverse Osmosis RO Water System Save 39% Off

iSpring 7-Stage 75 GPD UV Ultra Violet Alkaline Mineral Reverse Osmosis RO Water System with luxury faucet
  • 7-stage RO UV Alkaline PH system with luxury faucet
  • 11W Philips UV Sterilization Lamp in Stainless Steel Housing (as compared to standard 6W UV)
  • Alkaline filter provides a PH balanced drinking water for human''s body
  • Bacteria-free and Virus-free Drinking Water
  • All filters and membrane are standard 10" size, available at our store or everywhere

To clarify I purchased a 5-stage iSpring for a house we were selling and a 7-stage iSpring for the house we just bought... I have posted the same review for both units.

That being said...

This is our second iSpring RO system and 3rd system overall in the last 7 years. We bought a GE 4-stage from Home Depot in 2006 and it worked very well. We are a family of four and we pull, on average, 6-7 quarts of RO for drinking per day. I''m that guy who firmly believes in "go big or go home" and wanting more filtering we decided to upgrade to the iSpring 5-stage filter. That was last year. The iSpring is EVERY BIT as good as the GE if not better in terms of quality, ease of instruction, and performance. And yes, we could taste a difference between the 4-stage and 5-stage systems. The 5-stage tasted ''cleaner'' though I''m not sure how..

We were blessed to be able to buy our dream home several months ago and when we listed our original home the iSpring 5-stage RO system was listed as a feature of the house and ultimately a selling point. (we left the new home owners with a new, unopened set of replacement filters) The new owners told their agent that having the RO system already installed was ''very attractive'' to them and was an influence on their decision to purchase our house -off the subject I know but still things to consider..)

When it came time to purchase a new system for our new home I immediately went to Amazon to find an iSpring. I looked at a couple of other systems but really only to validate my belief that the iSpring is the absolute best bang for the buck out there. I went top-shelf and ordered the 7-stage ispring, complete with UV filter and mineral filter (ADDS beneficial minerals back to the water after the RO process) The price was excellent and the quality I already trusted.

The system is in and operating exactly as I would have expected and every time we get a glass of water we know that we have CLEAN, safe water. The taste is absolutely brilliant...

Okay, so I''ve told you that I''m very familiar with RO systems, having installed three of them. I ham a repeat customer to iSpring because of their quality. If I ever have to buy another system it will ONLY be iSpring. I''ve recommended iSpring to friends and neighbors without hesitation.. so what''s the "however?"

The 7-stage system is assembled in such a way that installation can be a real challenge. There are SO many filters and whatnot it is difficult to keep everything in place when installing. What I ended up doing (and LOVE actually) is that I went to Home Depot and bought additional tubing to mount each cartridge (stage) by itself. I moved 3 of the stages off of the main body and mounted them above the system. It is a very easy process and added literally 30 minutes to the install. Now I can easily get to each cartridge when the time comes to replace them. I think iSpring should look at remotely mounting some of the cartridges on the 7-stage systems... on the 5-stage it was no issue. The other "however" is a bit more serious. The UV filter is there to sterilize the water and the technology is sound. The problem however, is that the UV filter is ON continuously... and when no water is being drawn through the system that water which is in the UV tube gets hot... I mean HOT. This component absolutely needs to have a pressure switch added to regulate the on/off time of the UV light. When water isn''t being drawn from the system the pressure would be sufficient to turn the light off. When the fountain is used, the pressure drop would turn the light ON thus sterilizing the water as it flows. Close the fountain and the pressure goes back up, tripping the switch and turning OFF the light. In my opinion this is a pretty big deal.. I drew a small glass of water to take some Motrin and the water was so hot I almost burnt my mouth. I''ve unplugged the UV light so I am receiving zero benefit from that stage right now. I am going to figure out how to incorporate the pressure switch but honestly just haven''t had time.

So... long story short.. iSpring is an EXCEPTIONAL value! It is a wonderful system that you can trust to give you years of worry free/hassle free service. Installation is a breeze as long as you stay at 5-stage systems and below. Beware of the UV feature... until they incorporate a way for the light to turn on and off with water use (pressure switch) I feel the UV feature is UNSAFE.

At "gee male" you can add JGM dot Texas if you''d like to inquire further. Happy to help.

Buy iSpring 7-Stage 75 GPD UV Ultra Violet Alkaline Mineral Reverse Osmosis RO Water System Now

We were looking for a high-quality reverse osmosis system that offered an alkalizing filter for the added health benefit of alkaline water. We had a previous system without the alkaline or UV filters, so we were familiar with a basic in-home under-sink RO system and what to expect. This system came in many boxes with many parts, so we hired a professional plumber from Pelican Water Systems with experience installing more complex RO systems. The written instructions that came with the unit were quite lacking, and there were almost no instructions on how to install the 7th filter (UV filter). After the system was installed, we ran the tank out to flush out impurities and such, and the water remained a bit foggy with a bad taste for the first 2-3 weeks and then cleared. TEMPERATURE: We noticed the water came out of the tap VERY hot for the first 10 seconds or so... over multiple measurements, the temperature consistently was about 120 degrees! It was so hot it came out white and steaming, which caused us concern as a baby would soon be in the home. The plumber said this may be due to the UV filter, but unfortunately this was not mentioned by iSpring on their web site. As long as the UV filter is used, the water will be around 120 degrees whenever you run the tap for the first 10 or so seconds, but will go to room temperature afterwards. Because the water comes out too hot and we had to unplug the UV filter for safety concerns, iSpring issued a partial refund to bring the price down to that of a 6 stage filter. ALKALINITY: Over several pH tests we found the pH to be no higher than 6.75, typically reading at about 6 NOT the alkalinity promised between 7-8. iSpring agreed to send us a replacement filter to see if that solves the problem, we will update the review at that time. CUSTOMER SERVICE: iSpring has offered excellent customer service, and hopefully they will be updating their web site to inform potential customers about the UV filter heating up the water to 120 degrees.

Read Best Reviews of iSpring 7-Stage 75 GPD UV Ultra Violet Alkaline Mineral Reverse Osmosis RO Water System Here

I should give to this company 10 Stars.

A++ Prioduct

A++ customer service

A++ packaging

A++ shipping

A++ Seller

You are here, because you are tired of companies just give You promises and not product You are looking for?

I want to say I am one of the hard satisfaction guy in the whole world. If I say this company and its product is perfect so IT IS.

I drunk water all around the world from middle east,Europe, and North America. I always complain about water. But I am glad to find a best product in the market and the best company in the world. If you see sombody give to this company and its product 4 Stars, there is nothing wrong with this product.

I have no experience in plumbing at all. But I just install it in less than an hour.

I really recommend this to anyone.

Oh let me say this : I have had problem with the UV transformer which it did not work and after I sent an email to their customer service department. They told me they will send me another one. which they did. I gut my new UV transformer after 4 days. They have professional customer service. Water is Life. This seller is selling life to us. Do not wait. I am not leaving this comment to make the seller happy, I was in your position 2 weeks ago. I did not know what water fillter system should I buy.

Good Luck and Thanks iSpring

Want iSpring 7-Stage 75 GPD UV Ultra Violet Alkaline Mineral Reverse Osmosis RO Water System Discount?

This is an awesome product and a great return for the investment. Not hard to install (Took less than an hour) and we now have the best and cleanest water I have ever tasted, I even take water to work with me now. I also purchased the HM Digital TDS-EZ TDS Water Quality Tester with Auto-off Function TDS-EZ to test purity if the water and found my pool water was close to being as clean as my tap water. Not good! My Tap water read 179 PPM and my new filtered water was only 18 PPM and taste, well you have to see for yourself. I also put in a splitter in and ran a line to my Ice Maker, now even my ice is clean tasting and safe. I know my family is no longer being poisoned by Fluoride anymore and I really believe we all feel better and healthier.

I plan to install this system at my mothers, my Aunts and my X-Wifes so the kids will have safe clean water to drink there to!

Save 39% Off

EDIT: I have changed this review from 4 stars to 3 stars. I originally installed the system without the UV filter. Now that I''ve installed it, the water immediately tastes like electrical wire which is interesting because the UV filter installation process requires me to install an electrical wire into the water to power the UV bulb. I wrote to support to ask if this was normal, and their response was: "UV light may produce some ozone-like smell for new systems, but it will go away after a few weeks." Had I known I would pay extra for my water to taste like "ozone" (or, in my opinion, tastes like how the insulator of an electrical wire smells when exposed to heat), I wouldn''t have paid extra for the UV filter. That it''ll taste that way for "a few weeks" is even more frustrating than the 8 hour installation time required to get the thing to work in the first place.

While the quality of this product is awesome, and while my emails to support were answered within 2 business hours, I do have some suggestions for iSpring that might help others to avoid the same pitfalls I encountered.

Although I considered purchasing from Amazon, it was cheaper to purchase directly from iSpring. I rate the product 4 stars, not 5. The installation took far longer than expected I''d estimate about 8 hours. While some of the installation time was my fault (because I had to spend time to undo mistakes caused by poor instructions, and the time involved does not include the 3 trips to Home Depot) , I did use a professional contractor who was also confused by the installation process. I would kindly suggest a few improvements:

Suggestion 1 the part that connects iSpring to the tap is 1/2" pipe threaded. My unit was built in 2005, and it has compression threading. The connector near the tap is 3/8", not 1/2". Unless it is cost prohibitive, I would suggest including a couple optional parts. I would prefer to pay $5 more and have all parts available for my sink instead of be frustrated with the installation process.

Suggestion 2 have someone whose native language is English write the documentation. The documentation is part of the reason the installation took so long as it wasn''t clear and understandable. Some of the mistakes I made caused cross-threading which caused leaks.

Suggestion 3 label the parts of the system, then write the diagram using those labels. Another issue I had was the part with the word "flow" in dark blue print. It was not listed in the diagram, but there is a part in the diagram listed "flow" which caused me to re-route the hoses. It was only after at least an hour or two of frustration that I then noticed another part with the word "flow" inscribed on the side that is basically white. Had it been the part more prominently labeled "flow," I wouldn''t have rerouted the hoses and made those mistakes.

Suggestion 4 include the correct instructions to install the UV component. While I learned that the installation of the UV part wasn''t difficult, I only learned that after emailing support. The instructions that come with the unit refer to parts that don''t come with the iSpring, and the instructions that came from support described an entirely different process.

Thank you, and I am now (finally) happy with the installation process.