- Replacement water filter for Pur''s Plus faucet-mount filtering unit
- Yields healthier, better tasting water; reduces lead, chlorine, pesticides, and other particulates
- Fits Pur models FM3000, FM3500, and FM3550
Showing posts with label whirlpool water filter cartridge. Show all posts
Showing posts with label whirlpool water filter cartridge. Show all posts
Pur Single Replacement Filter for Pur Plus Faucet-Mount Filtering Unit
Hoover MaxExtract 77 Multi-Surface Pro Carpet & Hard Floor Cleaner Save 7% Off
This is my second Hoover, the first one didn''t survive lending it to my girlfriend. She took it apart to clean it and never could get it back together again. Oh well, it was about 20 years old and probably would be fine if I were to fix it.As for this one, it works as well as the first one. I just cleaned my beige carpet which hadn''t been cleaned in at least 5 years. It looks almost new. Also I''ve been doing some landscaping and had tracked a lot of mud across the carpet and you would never know.
I also used it to clean my ceramic kitchen floor and it did a pretty good job. It didn''t get a few small spots (got most of them) where spills had been on the tile for a long time and it didn''t get the grout between the tiles. To be fair, in the past I had clean those spots with a scratch pad and the grout had to be cleaned with a brush. Still, it was much faster and did a better job than I achieved by hand. I didn''t use the squeegee because the grout lines negated the usefulness of it and it picked the water up fairly well.
________________________________________
On the downside, the brushes quit spinning shortly after I first used it or perhaps not at all, I''m not sure about that. I was going to return it, but figured it wouldn''t hurt to see if I could find the problem and fix it. The fix was very simple.
First you need to remove the dirty water tank. Under the tank near the front of the machine there is a impeller unit housed in a black irregularly shaped part with a screen facing the front of the machine. You can see it on the first picture posted here by "Peggles". It''s just behind the yellow spray bar in the front.
First remove the front (suction guide) of the machine. It is the piece with the lettering on the front of it. Near the top (under the water tank) there is a plastic tab that you pull on and rotate the piece forward. It will come right off. This is the same piece that you need to remove to get access to the front screen.
Next, Remove the 2 front screws and the 2 back screws (not the 2 middle screws) on the impeller unit and it will lift off the machine. On the side of the impeller unit you will see a number of tabs holding the top and bottom together. Carefully pry the tabs out (a little) and pull the top and bottom of the unit apart. Once that is done, turn the unit over and you will see the impeller.
On my machine the impeller would not turn, so I rocked it back and forth until it did. Once I did this, the impeller would spin freely. I put everything back together and it has been working fine ever since.
________________________________________
Another problem I had the first time I used it was that it quit sucking up water. As others have mentioned, there are two screens that, if not cleaned, will prevent the cleaner from sucking up water. So, just inspect and clean these screens every time you dump the dirty water and it will work just fine.
________________________________________
These misgivings aside, this is a nice machine.
What I like about this machine over my older one is that the tanks are easier to remove and dump, especially the dirty water tank. I also like the separate tanks for the cleaning solvent and water.
BTW, I sent an email to Hoover regarding both of my concerns.
Buy Hoover MaxExtract 77 Multi-Surface Pro Carpet & Hard Floor Cleaner Now
I spent several weeks researching different types of carpet cleaners, and was actually aiming for a bissel when I looked this product over and opted for Hoovers the much easier two container (holds way more water=less time filling and emptying)unit. I got this product during a sale at Kohls, and it''s brilliant. Assembled in minutes, and was cleaning my carpets 20 mins after getting home. I noticed the brushes weren''t turning, so I took out the dirty water dispenser and noticed the arm that controls the brushes was vertical. I moved it down, and voila, the brushes work fine now. The speed control doesn''t appear to make that much of a difference in rotations. I don''t use it anyway.Clean up is super easy, and the soap mixer/dispenser is a very welcome addition. The power surge really does do a surge, lol, the first time I overdid it a little, and spent some extra time getting the water up from the carpet. Thing is, it picked up all that water, and the wet spot was as dry as the rest of the carpet.
I found that going over the area again after a few minutes picks up even more water, and yes, I had one area of carpet that was literally dry to the touch in a couple of hours.
This carpet was brand new when we moved in one year ago, and there was some pretty dirty water! But, when completed, the carpet looked like it had just been laid down again without that nasty new carpet smell. I have a small dog that lives for marking one of my loveseats, and the upholstery cleaner had it looking (and smelling!) brand new in no time flat.
I like that it''s dual surface, it''s cleaned my ceramic tile floors within an inch of their life and they are sparkling white again and dry as a bone. It''s got a squeegee attachment that I haven''t used yet.
This thing truly sucks!!! ROFL, in a very, very good way!
Read Best Reviews of Hoover MaxExtract 77 Multi-Surface Pro Carpet & Hard Floor Cleaner Here
Years of good experience with Hoover products and very good features on this machine led us to purchase it. It was easy to assemble and directions were good. However, it did not work. Cleaning solution was not being dispensed during operation, it was just wetting the carpet and sucking it sort of dry. Two days after we received the machine, we phoned customer support at Hoover; they were woefully unhelpful. Their only offer: If we paid to ship it back, they would send us a repaired one. I figured it was a sucker deal to offer us a repaired machine to replace a new machine that was faulty.Amazon, however, took the machine back at no charge and sent a new one, as we requested, also at no charge for shipping. I can always trust Amazon to stand behind their sales!
The machine''s features are so good, I''ll try again. But it better be good this time! And Hoover needs to listen to engineers and business people rather than their bean counters. They need to have responsive customer service.
Update: Amazon (bless them!) sent a new cleaner right away. Great service and response, very good phone support by Amazon. The new cleaner works fine so far and cleans very well. We have used it only once; I''ll wait and see.
Want Hoover MaxExtract 77 Multi-Surface Pro Carpet & Hard Floor Cleaner Discount?
I did a lot of research before purchasing this carpet cleaner comparing features and weight of the machine. Not that this is a light weigh machine, but I did find that the Platinum models all were a good bit heavier. I love the separate containers for clean and dirty. The collection tank also opens up to allow you to clean the dirty tank. Some may think no big deal after all it just gets filled with dirty water. For us pet owners we know what we may have to be sucking out of the carpet that is a big plus. This feature sold me on the hoover over a Bissel. Also it does suck up alot of the water. While it claims no more wet socks, that requires a logistical miracle. You do go back over the carpet a couple times to suck up all the water. It sucks up enough that it is dry with in a couple of hours (with the help of a fan).my carpet is very light colored and had very dark streakssome that were made worse by cheap carpet cleaners. This cleaner was a last ditch effort to avoid replacing my carpet and it did the trick. At first I thought it was leaving a good bit of dirt behind but by the time I turned it to rinse and then went over it once to help get the water up, it was great. I highly recommend this model!
Save 7% Off
Hamilton BeachStay or Go Digital Thermal Coffeemaker Save 14% Off
I was given this as a gift. I found reviews for it (either the model in all black or brushed aluminum) favorable. Some people rated it negatively because they failed to read any directions and didn''t press the "PRESS TO POUR" button on the carafe. Instead they unscrewed the top off and said it spilled when pouring. RTFM You always have to look to see if bad reveiws are due to the user''s mistakes and lack of knowledge of the reviewer. They often are.The two most negative things is...
1. When making a full pot I almost always get a lot of grinds. The problem is that the filter cup fills too quickly and the water level goes over the height of the paper filter. I''ve tried to find a taller filter, but they seem to all be the same size. Usually I either do a single mug (three 6 oz. cup servings) or the full carafe(10 servings). I can''t recall if I''ve tried 6 or 8 servings to see if grinds are an issue there.
2. the plastic travel mugs retain water between the stainless steel outer shell and the inner plastic shell. UNtil I realized what the issue was, they would dribble (dish/cleaning water not coffee) when I drank from them. I find water gets in between especially after a run in the dishwasher. To get the water out, hold them by the bottom. With them facing upside down wave the mug back and forth (like a pendulum). Do it very quickly and the water will shake out. Once I found the problem, the constant dribble from a clean cup stopped. They keep the coffee reasonably warm for a while. Especially if you run hot water in the mugs before you use them-so they don''t leech heat from the coffee to equalize.
3. the Hour/Minute buttons might be too easy hit and change the clock time. They should have a set button. I haven''t done it, but that''s the only negative.
For singles or a lone couple this is great.
I like the double spout so I can brew one mug, two mugs or a whole pot.
No need to dirty the carafe when I''m making small amounts which is 95% of the time.
The Timed brew is easy to set and works well.
I use unbleached paper cup filters. (this uses a bucket, not the cone shaped filters.)
The coffee bucket lifts out on a loop handle and is easy to dispose of grinds.
The instructions it gave on measures of coffee were good. When I used the instruction on the brand of ground coffee, the coffee tasted terrible. The coffee company said to use almost twice as much ground coffee than Hamilton Beach says.
I''ve already experimented with Torino''s sugar free vanilla syrup, and some ground cinnamon in the coffee bucket add a great cinnamon spice without the sharp taste of the grains of cinnamon floating on top of the coffee.
I''ve had the coffee maker about two years now. Despite being mostly plastic, I''ve had no breakdowns. Nothing has fallen off or cracked.
Feb 2013
Coffee maker still going strong. I rarely use the carafe, but the travel mugs are still how I make coffee every day.
Buy Hamilton BeachStay or Go Digital Thermal Coffeemaker Now
When I buy a coffee maker I expect two things. I expect the unit to heat the water sufficiently to brew exceptional coffee, and it should pour without dribble.Regarding the former, this unit scores five stars, provided the reservoir is filled with room temperature water. The heated water travels through a plastic tube back through the reservoir on its way to the spray nozzle, so if the reservoir is filled with refridgerated water, there''s a heat transfer issue at play that decreases the temp of the heated water before it reaches the coffee grounds. With ambient temp water I''m getting about 195F; very good. With refridge water, about 180F; not bad but certainly not optimal.
Regarding dribble, I have not experienced the problems mentioned throughout these reviews; perhaps the spout has been redesigned due to complaints. And I''m no stranger to dribble; I''ve used many a Mr. Coffee machine so I''ve fought the dribble battle. So five stars from me for lack of dribble.
As for the carafe, it''s thick and it outperforms the Black and Decker I had. However, I don''t have heightened expectations on any stainless steel carafe keeping coffee piping hot more than two hours, and this unit meets my two hour mark without issue.
Finally, HB added a couple of bells and whistles to complete the product.
Programmable; always nice to have.
A "1-4 Cup" setting that adds 5-10 degrees and slows the spray to get more flavor from the grounds, but I don''t detect much of a flavor difference.
Bottom line: a solid machine and I''d purchase it again.
Read Best Reviews of Hamilton BeachStay or Go Digital Thermal Coffeemaker Here
I purchased this at Kohl''s for $69 bucks. It is awesome! I used to have a Melitta take 2 that brewed into to go mugs or into a carafe. The Hamilton Beach brews much hotter coffee. The carafe is larger and keeps it warm for a long while. I took a mug to work 2 days ago and it stayed warm on my desk about an hour longer than the melitta mugs. I like that you can use any travel mug with this unit. I have only one complaint...the mugs leak water after washing. Water gets trapped in the black rings and then leaks out. So, be sure you are dry before you head out.Want Hamilton BeachStay or Go Digital Thermal Coffeemaker Discount?
Length:: 0:31 MinsI think the video says it all...
Save 14% Off
Rainshow''r PFGG Prefiltration Filter for GardnGro Save 6% Off
- Reduces the amount of sediment
- Fine 15 micron double mesh screen
- Optimizes Gard''n Gro electro-chemical action and effectiveness
- flexible vinyl hose saver prevents prefilter damage from hose whipping
- High pressure reinforced hose
Buy Rainshow''r PFGG Prefiltration Filter for GardnGro Now
This system is great for the garden. I''ve noticed a difference in the quality of the vegetables and the condition of the soil since I started using it a few months ago. My trusty earthworms would give it two thumbs up if they had hands!Read Best Reviews of Rainshow''r PFGG Prefiltration Filter for GardnGro Here
For the past two years my drip irrigation was getting blocked up with small rust from the well. I had to clean each dripper everyother day. Now with this prefilter I only half to unscrew the filter, wash it out and put it back. It only takes about a minute verses many minutes of cleaning before.
Spa - Hot Tub Water Brick Booster Seat
Does the job. Just need to make sure that you use clean stones to weigh it down. I soaked mine in Chlorox before inserting into the pillow.
CQE-RC-04052
This replacement filter fits and it works with our "bath ball" from "another" supplier. This is a better price for the same quality product.
G.T. Water Products, Inc. MP500-B4 Master Plunger All Purpose Plunger
- Great for sinks
- Stream line design allows this plunger the power and flexibility
- Patented air release with a quarter turn of the hand
- All purpose plunger for the hard to reach drains and a bucket for convenient storage
- Made in the U.S.A.
Buy G.T. Water Products, Inc. MP500-B4 Master Plunger All Purpose Plunger Now
I just had to use this plunger again yesterday, so I thought I should mention it here. I''ve had this plunger for a few years and it''s unclogged several drains. It''s small enough to fit under the sink, is light weight (it is just formed plastic), and breaks up every clog I''ve thrown at it. Since it''s all plastic, you can wash it up fairly easy (wooden handled plungers, not so much).Read Best Reviews of G.T. Water Products, Inc. MP500-B4 Master Plunger All Purpose Plunger Here
It''s just great!! I bought the black plunger, which is for $5 and shipped for free, to unclog my shower drains (btw it looks different than the picture above, it doesn''t come with a cup). Even though it''s small and light, it does the job effectively. I highly recommend this plunger.Want G.T. Water Products, Inc. MP500-B4 Master Plunger All Purpose Plunger Discount?
I hate to say it, but my toilet requires a plunger on a fairly regular basis. I''ve tried the old fashioned kind, the OXO type and several others. There are no other plungers that compare to the Master Plunger line. They are a simple piece of cheap plastic, but they work like they were designed by engineers at NASA (and I mean that in a good way). The concept is simple. The accordian design sucks massive amounts of water into the plunger and then pressing down releases it. It unclogs any mess I have seen in one plunge. After the toilet is flushed, I plunge it a couple more times to clean out the inside. The reason I like this model is that it comes with a handy stand. The master plunger can be placed right in the stand after use and will drip dry. I can''t say it is the most aesthetically pleasing item in my bathroom, but when it works this well, I don''t mind. If you''re looking for an effective plunger, I highly recommend the Master Plunger.
Moen 1248 Two-Handle Replacement Cartridge Save 23% Off
- Fits all Moen Roman tub faucets
1. First remove the handle
2. Remove the extension piece. It just pulls out
3. With a pipe wrench (with duct tape of the cleats), remove the decorator bezel
4. Remove the cartridge retainer cylinder nut. It''s plastic and is screwed out from the inside. They have a special tool for this but I just used some pliers to get it started and then it screwed out by hand.
5. The cartridge is now free and can be pulled. It''s a tight fit and a standard puller is not deep enough. I used a piece of perforated plumbers banding. Just bend the metal into a long U with a perforation at the base. Attach the screw through the bracket and into the cartridge. Use a screw driver for leverage with some perforations at the top of the U and pull up with a lot of force. With enough force, the cartridge will come out.
Install New Cartridge:
Coat the new o rings with plumbers silicone grease and jam the new cartridge into the socket. There is a notched part in the cartridge that will align with into socket. Screw the retainer piece back in and rebuild the handle in the same manner you disassembled.
Google Moen 1248 or see the insert that comes with the part for more detailed info. It''s just not quite written for a roman tub so it''s a little tough to follow.
Only 3 stars to Moen since the new cartridge smashed apart the first time I installed it. They don''t emphasize or even mention the grease. In my case it was a must. In general, the cartridge could be better built. Moen was very kind to send me a new part. Good luck finding this locally. Amazon is the best for items like this.
Save 23% Off
SteamFast SF-275 SteamMax Steam Cleaner Save 37% Off
I''ve had this steam cleaner for about 6 weeks and have found it to be an excellent addition to my cleaning tool arsenal. It does have its limitations, however.The positive features is that it''s easy to setup and use, and the compact shape makes it easy to find a place to store it when you''re not using it. Setup is a snap just attach the handle using one screw, and the manufacturer is thoughtful enough to provide an extra long, thin screwdriver since the handle screw is recessed. Nice touch. Also comes with a lot of attachments for pretty much anything you''d want to clean (grout lines, counter tops, floors, windows, BBQ grills, etc.).
The biggest plus is the price. I''ve looked at steam cleaners for years, but was always put off by the steep price tags. Some of the high end European models run $1,500 or more for that kind of money, I''d rather pay someone to clean for me! So, a low price is a big plus.
BUT, this low of a price means you''re not getting the functionality of a high end machine. For example, the steam is pretty wet, and you''ll also get a big dribble of water when you start up after pausing for a few moments. The tank is rather small, and you can''t add more water without letting it cool down first. The attachments are OK in terms of function, but wear at a fairly fast rate. Build quality is good for the price paid, but you''ll need to take care that you don''t damage the wands since they are all plastic.
All in all, however, I''m happy with this. It makes it much easier to clean grout lines on my kitchen counters and floors, which is the main reason I got it. Again, it''s not magic you still need to put some work into it, but it''s much, much, MUCH easier than using a scrub brush. What works well for me is to spray on some grout and tile cleaner first, let it set for a moment, then hit it with the steam. Wipe up with a clean microfiber towel and move on to the next section. I can do an entire room in the time it used to take me to do a small area with my trusty scrub brush.
I''ve also have had good results using it to clean soap scum off tiles and shower doors, getting in the nooks/crannies around faucets and toilets, and cleaning drips/spills in the oven and on the range top. Light to moderate dirt/grime comes up with just steam. More intensive messes (or ones that are very greasy) need to be sprayed first with a spray cleaner (409, Fantastic, or whatever brand you like) to help the steam do its work.
And remember, it just sprays steam it does not suck it back up like a carpet cleaner. Keep a towel handy to wipe up the water and loosened dirt. Microfiber works best, but any absorbent rag will do.
Couple of points to keep in mind:
1) Use distilled water, especially if you have hard water. A build up of scale/mineral deposits will kill a steam cleaner very quickly.
2) Wear ear plugs if you''re working in a small room (such as a bathroom). The noise level can really get to you after 20 minutes or so.
3) There''s another model made by McCulloch that is exactly the same as this except that it has a slightly longer hose and a different colored casing. Pick whichever one happens to be on sale/best price they are functionally identical.
The unit did warm up fairly quickly and I was impressed with the quality of the accessories, using thick plastic, good quality rubber seals etc. This model I think would work well as doing primary duty as a clothes steamer but its lack of pressure make it not the best choice for blasting nooks and crannies, where a really good steamer excels as a cleaning maching no other device can touch.
Let me explain. I compared this steamer with the Saeco Piccolo steamer and with a high quality thermometer recorded the Saeco at about 190 degrees and the steamFast at about 170-180 degrees. Secondly I put a paper cup on the floor and with both machines heated up with a full tank of water, I pointed the nozzle at the opening of the cup to see which model would blow the cup the farthest. The SteamFast product blew the cup about five feet. The Piccolo blew the cup 15 feet and probably would have kept going if it was not for the wall stopping it. Not even remotely close.
Next I took both steamers out on my deck and pointed the nozzles at a hose that "overwintered" on my deck....complete with black moldy stains hiding the normally greeen hose. The SteamFast product blew steam at the hose but it did not really eliminate the moldy stains.
Next tried the Piccolo...WOW....this sucker blasted those stains down to fresh green hose.
Test over. Note: I also tried the same test with a Euro-Pro Shark Steam Blaster Ultra with similar results to the Chinese made SteamFast product.
I will add some more details in my review of the Saeco Piccolo. Needless to say, I returned the SteamMax.
Let me say, I think the overall positive results for this product are not surprising to me considering most users have not probably used an Italian made steam cleaner which seem to have hotter steam vapor, far more pressure, a longer track record of using similar technology in espresso machine manufacturing, etc. The downside of the Italian products is that it might be a bit harder to find parts and service for since they are not produced for the mass market like the steamFast and shark products. It''s too bad as I really wanted the SteamFast or Shark to perform better.
Honestly if you don''t make the comparison between the Piccolo or similar italian made steamer and the SteamFast, you may think you are getting a great product as it will produce consistent steam...but you won''t be aware of HOW MUCH MORE YOU COULD DO with the serious pressure levels of the Italian steam cleaners. I hope some other people do some comparisons.
It was kind of fun to be my own consumer reports for the last few weeks, but I am a huge fan of these cleaners and their many uses. Most Americans have not caught on to what the Europeans have known for years.
Buy SteamFast SF-275 SteamMax Steam Cleaner Now
I hesitated to purchase a steam cleaner so I read many reviews including McCulloch MC-1275 steam cleaner reviews. I decided to purchase MC-1275 and then I found SF-275. Both have very similar looks and spec. I think both models are the same one. Anyway, SF-275 was $30 cheaper than MC-1275 so I purchased this one.I use this for cleaning my shower room. It works! but don''t expect magic. It takes time to clean old stains. Steamer is really good on narrow areas (between tiles). It is extremely difficult to clean between tiles with other cleaners but steamer is really good. I tried to clean deck chairs. The chairs have some mildew stains and I didn''t expect the steamer can clean it but the stains were disappeared.
The build quality is good. I just wish they improve the switch for continuous steam. It is very small. I recommend to use the distilled water only.
I recommend this steamer to any one looking for high quality steamer.
Read Best Reviews of SteamFast SF-275 SteamMax Steam Cleaner Here
I did a lot of research before deciding to buy the SteamFast SF-275. I wanted an all purpose steamer in the $89-125 range. I''m glad I did my homework. There were a few other steamers I might have bought but this one came so highly recommended by nearly everyone who left a review on every site.Having never used a steamer before I didn''t know what to expect. I can tell you now, though, I have not been disappointed! This little guy is great. I''ve cleaned tough mildewed shower grout, mild rust spots off the bathroom counter, got rid of a mildew odor from the bottom of my couch, steamed all bedroom pillows to get rid of dust mites and other allergins (it really works great), and finally got my 25+ year-old kitch floor looking like new! It really does do just about everything.
You do have to do quite a bit of scrubbing when you clean a dirty area for the first time and this is the ONLY reason why I give it four stars. I suppose that''s to be expected, but after the initial elbow grease, keeping it maintained is as easy as "wanding" and wiping. No chemicals!!!
Here''s a few tips/recommendations to help you when you use it:
* Buy a pair of heavy latex or rubber gloves. I bought a pair that are used for paint stripping. Be sure that they are comfortable enough to bend your fingers and wear for an extended period of time. This will help prevent accidental steam burns. DO NOT think that because you are wearing gloves that you can expose your gloved hand to the direct steam.
* I have allergies to mold and mildew. When you use steam to clean you are blasting it with hot water and killing it but the spores could become airborne or be released in the steam itself. I find it best to wear a mask that is made for mildew/mold. If you can''t afford the $30+ model even the just above basic paper mask, that is thick and has a filter, works very well.
* Be sure to keep the area well ventilated. Steam isn''t poisonous like chemicals but the room will start to get humid if you don''t.
* Don''t ever, EVER use warm or hot water on cat urine. This will set the smell. Avoid using any steamer on carpets that have had kitty accidents. Also, if you have hardwood floors under your carpets, even if you''ve had no pets, I''d skip this too. Unless the hardwood floor has had several layers of shellack before the carpet was installed pet ordors can still be draw up. Even if there hasn''t been an animal in the house for 10-15 years it''s possible.
* Be sure to sweep the floors and remove any loose dirt from surfaces before you steam. There''s nothing like trying to wipe up extra "gunk."
I hope those help out. I love this steamer and I think you will too!
Want SteamFast SF-275 SteamMax Steam Cleaner Discount?
I have been looking for a steam Cleaner for quite some time. I have few friends already had different kind. I was not too impressed with what they had only because of the function, and capability. I could not settle for smaller ones only does a job for 5 min. Then, I did some more research on the net, and other various placces. FINALLY, I foud me this exact machine. I got it, tested, and LOVE it. This machine does ALL and more for what I expected. Light to carry around, POWERFUL to do just about any cleaning in no time. Love the design also. If you want a REAL TOP QUALITY Steam Cleaner, GO WITH THIS ONE.Save 37% Off
Culligan IC-EZ-1 EZ-Change Icemaker/Drinking Water Filter Save 37% Off
- Features twist-on and twist-off mechanism, quick connect fittings double water shutoff
- NSF certified
- 3000-gallon capacity
- Reduces bad taste and odor, chlorine taste and odor, and particulate class III
- Uses RC-EZ-1 replacement cartridge
This Culligan model has them beat. The price is good, it''s easy to install, and very easy to replace cartridges. If you have an existing plastic water line, installation is trivial. This also works with copper lines, and is not much more difficult to use with them, except the instructions are not clear. The outside box says you can use either copper or plastic, but the included instructions don''t mention the copper, or the additional tools needed to file the edge as the outside box mentions. Despite this, installation is trivial enough that it''s not likely to be an issue.
If you do have copper, and need to fit things in a tight space, you might need to replace one end of the tube with plastic since short lengths of copper are relatively inflexible.
I also got one for my instant hot water tap on my kitchen sink. It''s not "specially designed" for it as are the ones that are recommended for those, but they all take the same size tubes and have cold water coming in and going out. This one is far cheaper, does everything I want to make the water taste good, and there are enough Culligan options for anybody who wants a different level of filtration that you can pick what you need.
UPDATE:
Two years later, I removed it. It was not that there was any problem, but I installed a whole house filtration system and it was no longer needed. That showed me two things: First, the taste of the water did not change, meaning the Culligan worked just as well for me as the far more expensive system, at least with respect to taste. Second, it had been slowing down the flow of water on my instant hot water dispenser. The flow was noticeably faster without it, but I would not consider the slow down an inconvenience at least with respect to filling glasses or cups. Filling a pot of water is a different story, but the difference is understandable and what should be expected with this type of filter.
Buy Culligan IC-EZ-1 EZ-Change Icemaker/Drinking Water Filter Now
My fridge had an ice maker in it for nearly a year before I used it because I kept forgetting to buy a filter, I had to have someway to support it and have it not behind, but beside the fridge (the fridge sticks out too far as it is) This filter is the perfect answer. It was insanely easy to install, hasn''t leaked a bit, is easy to replace the filters (just twist out the old and twist in the new) and the water tastes GREAT! I filter all my drinking water so putting unfiltered (ie disgusting) ice in my water or tea was out of the question! I love this filter and I love my ice maker! (the price on this is great, too!)Read Best Reviews of Culligan IC-EZ-1 EZ-Change Icemaker/Drinking Water Filter Here
The co. needs to provide much better connections to water supply and refrigerator; too easy for connections to fail. After installation, with no sign of any leakage, the ref. connection failed (came apart) during the night causing considerable water damage to the dining room/kitchen floor and basement. Do not recommend this product.Want Culligan IC-EZ-1 EZ-Change Icemaker/Drinking Water Filter Discount?
I was very hopeful about this product, but I had a very hard time with the install. It is a relatively ''easy'' install, but the problem is that it leaks once connected. I tried to install with plastic ice maker connection tubing but once I turned the water back on, strong leaks developed at the point where the tubing connected with the filter. So then I tried with my original copper tubing, cutting it to try the install. No dice, same leaks at connection points.Attempting to install this product ended up costing me $26.
I replaced the copper tubing with a stainless steel connection like this, for a much more secure connection:
http://www.amazon.com/Watts-WTS-SPCC120-44PB-Stainless-Icemaker-10-Foot/dp/B00439HNF4/ref=pd_cp_hi_0
UPDATE 5/31/12: I found an ice maker filter that I am very happy with: http://www.acehardware.com/product/index.jsp?productId=1422266 Installs easily with 1/4" threaded connections no danger of leaks!
Save 37% Off
I installed the Culligan IC-EZ-1 after my wife complained about our ice tasting and smelling bad. It was super easy to install. You can use copper or plastic tube with the filter. I had copper line running to the fridge. No leaks after the copper line ends were inserted. Filter is really easy to remove and change. One thing to consider before buying is placement. It will project out from the mounting wall by 5" or so. You may need to route the copper through an adjacent cupboard and mount the filter in there, then route the outflow back to the fridge.Ice problem is cured.
Porcelain Water Dispenser Blue Stripe Save 19% Off
This is a good water dispenser. It was easy to assemble and it is sturdy. I think it looks nicer than the plastic/aluminum units I''ve rented from the bottled water companies. Well-worth the money.
Buy Porcelain Water Dispenser Blue Stripe Now
I was pleasantly surprised when I received this item: It has a sleek wooden stand and also a nice looking porcelain dispenser. It is so much sturdier than the previous plastic water dispenser I owned! I am glad I switched!Read Best Reviews of Porcelain Water Dispenser Blue Stripe Here
The directions are not very clear how to assemble the stand. The all important missing line is "Tap the bottom of Part B to remove bottom wooden bar, then insert Part A, replace the bar on part B". The bar that I am referring to is put together with wooden pegs. After a half hour, we started tapping on the parts, and the bar finally came loose. It reminded me of a Chinese puzzle until then. ;-).The product is excellent and the company is A1.
Want Porcelain Water Dispenser Blue Stripe Discount?
We have really bad water where we live and have been extremely pleased with our water dispenser. We shopped around and could not believe the price that we got this for. Very fast shipping. Couldn''t be happier!Save 19% Off
iSpring 50GPD 5-stage Under-counter Reverse Osmosis RO Water Filter Save 47% Off
- Brand new 5-Stage 50 Gallons per Day (GPD) Complete RO system with luxury beautiful faucet
- No electricity is required; All filters and membrane are standard 10" size
- Free upgrade with Luxury Faucet ($30 retail value), an accent to your kitchen
- Our RO systems are 100% wet tested before shipping.
- Complete system ready to be installed.It includes all filters, tank, faucet, tubing, and fittings
Save 47% Off