Purenex RO-6-100 6-Stage Reverse Osmosis Water Filter System Save 9% Off

• Overall rejection/removal rate: 98-Percent to 99-Percent for the Ultra-pure
• removes chlorine, chloramines, bad taste and odor
• removes sediment, rust, dirt
• removes 95-Percent to 97-Percent of chemical, minerals, dissolved solids, like arsenic, lead, silica, nitrate, copper, ammonia, sodium, fluoride
• removes the mineral and chemical contents of water and achieving 99-Percent to 100-Percent removal rate

I shopped a few water systems in concern of not only removing junk from the water, but also harmful chemicals that other water filters DO NOT REMOVE. Fluoride, Chlorine, Cloramine, Arsenic, the list goes on what OUR GOVERNMENTS are putting in our drinking water. Believe me, I''ve done my homework and researched the damaging effects to the body that all these chemicals are doing to you over time. Plaque in your veins, Heart problems, immune system problems, arthritis problems etc... I have medical issues myself, well actually HAD is the word now. There were a few drastic changes I made to my living. This water system is one of the changes. Simply put, my issues are disappearing and going away completely.

Anyway this system is one of the best for the price. Other systems are pretty good too but don''t remove as much chemicals from the water. Just sediment. Sediment won''t kill you, chemicals will. Good luck.

Just a side not, it uses 1/4 inch plastic tubing, so if you want to connect it up also to the refrigerator, you can just go to the local hardware store and get a 1/4 in T and 1/4 inch plastic hose and run it there also to get clean ice and water in your fridge too. Refrigerator filters do not remove chemicals. Just sediment. My ice now days is pure crystal clear. Not white like it used to be.

Save 9% Off

Read More >>

AR Blue Clean AR383 1,900 PSI 1.5 GPM 14 Amp Electric Pressure Washer Save 18% Off

Pros:

The unit is lightweight and easy to move. It has a variety of included attachments to tackle almost all jobs around the home. One nice feature is the adjustable spray tip on the wide-angle wand. The unit has a lot of power for an electrical pressure washer -more than enough to clean driveways, decks, grills, mowers, etc.

Cons:

As mentioned in many other reviews, the plastic hose adapter leaks water, right in the middle where the two washers meet. The leaking is so bad as to make the unit unusable, unless you enjoy being sprayed with a torrent of water while you work. The solution: go down to your local hardware store and buy a brass male-to-male hose adapter for 8 bucks. Now you are in business.

The high-pressure hose that runs from the unit to the spray-gun is made from a stiff plastic that tangles easily and is hard to manage as you move around. I am currently researching buying an after-market hose made from high quality rubber to avoid this problem.

Also, don''t bother storing the hose using the built-in reel. It is fussy work trying to get the hose on and off, and bending the hose in tight circles makes it that much easier to tangle when you use it. Simply coil the hose loosely and drop it around the top of the handle. This will save you lots of time.

Final thoughts: This unit provides a good value among other electric pressure washers, if you don''t mind upgrading the hose adapter and dealing with a slightly annoying hose.

The pressure washer does its job beautifully. It has a really long electric cord which was one of the requirements for me since I didn''t want to mess with extension cords. The hose is actually pretty long too, so you don''t have to drag the pressure washer around when you wash your car for example. Just set it in one place and the length of the hose will be enough reach all around.

The pressure washer comes with 2 wands. One has a rotating tip and the other one has a tip that can be adjusted for different spray angles so you don''t really need to buy any extra tips. It also has a bottle for cleaning chemicals.

All accessories, electric cord and hose have their place right on the unit and they fit quiet nicely.

Don''t forget, it has 1900 PSI which is really pretty high pressure for non-commercial pressure washers. I don''t know what''s inside the unit, but it just feels sturdy and solid.

I don''t usually write reviews but what made me do it is AR North America''s customer service. After testing the unit, I ordered an extra accessory from them directly (flat surface cleaner to clean cement surfaces). They have phone #''s and email addresses of their entire staff listed on their web side, so I asked few questions which were answered immediately. So I placed my order and couple of days later they informed me that the part I ordered was on back-order, so they offered to refund the money if I didn''t feel like waiting. You know, usually companies will make you wait even if it''s couple of weeks. I asked them how long I''d have to wait and they told me about a week which wasn''t a big deal for me at all, so I was prepared to wait. The next day I received another email from them saying that they would send me a $90 surface cleaner instead of $30 one I had ordered...get this... at no extra charge. I buy stuff on-line very often and I have never seen anything like that before.

Great product, great customer service. It''s very comforting to know that a company stands behind their product in case you need it and most importantly, easily accessible.

Buy AR Blue Clean AR383 1,900 PSI 1.5 GPM 14 Amp Electric Pressure Washer Now

I did a lot of research on electric power washers and this brand seemed to have really good professional reviews. I chose this particular model because of the long power cord and the long high pressure hose. As extra bonuses you also get 1900 pounds of pressure and everything wraps up nice and neat on the unit. My only concern is the plastic connection for the hose. I wish they would have used brass or steel like what they have on the high pressure connection. I''ve tested the unit for about three hours. I washed a couple of windows; did a great job. I cleaned my tiled patio; got the dirt out of the grout. I cleaned my car; got most of the dirt, but even a 3000 psi unit can''t get it all, it''s just a basic fact you have to use some elbow grease to get road scum off. I also tried it on my fence to clean off dirt and moss build up; didn''t do such a good job but then again it is a 1900psi unit and for wood you really need at least 2600psi. For that you need a gas unit and I really don''t want to deal with the mess, the loud noise, and the maintenance. I''m really happy with this unit so far, I just hope it doesn''t break after a couple of uses like I heard from reviewers of other brands.

Read Best Reviews of AR Blue Clean AR383 1,900 PSI 1.5 GPM 14 Amp Electric Pressure Washer Here

I purchased the AR383 from a local retailer for $120. I have used the pressure washer for a few hours and here are my observations:

I find the shut-off feature to be really nice. When you release the trigger handle on the wand and stop washing, the motor shuts off. No worries about burning up the pump. The pressure available is what I expected: not nearly what a gasoline powered washer will do, but fine for an electric. Serious power washing will require a gasoline powered pump, but for small, short duration jobs, like blasting a lawn mower, vehicle, or small deck, it''s really fine. And using an electric pw is light, quick and mess-free. Haul it out, hook it up, do the deed, and then put it away.

I am also pleased that the hookups for water input and pump output are metal. Aluminum I believe. Some consumer grade washers have plastic fittings at these locations and are very fragile. The wand and rotary tip supplied work great. And now for the nits to pick:

In general, a wand tip that offers "adjustable" spray pattern is a compromise. Fine for some, but nonadjustable tips that offer different spray patterns work much better. A significant criticism is the placement and specification of the pump output. The high pressure output is located in an area that is difficult to access for threading on the high pressure hose. It can be done, but I think it is too fiddly, and too easy to damage the threads in the soft aluminum. To make life easier, I thought I would purchase some quick connect fittings to modify the pump output and the hose input. Well...AR has chosen to use a 15mm pump/hose size, so none of the more common (in the USA) 14mm fittings will work. Naturally, if you are not bothered by no quick connect capability, this point is moot.

To be fair, I emailed the USA technical dept at AR asking about a quick connect adapter. Very quickly and politely I was informed that there was no provision for quick connect adapters but that my concern would be relayed to the engineers in Italy. Other technical info that I requested was offered as well. As far as quick and thorough answers to my questions, highest compliments to AR customer service!

At this point, as is my way, I stepped out of the normal consumer universe and decided to design and fabricate a device so that I could use the available quick connect adapters with my new AR383. A couple of dollars worth of brass tubing and a few minutes work at the metal lathe, and voila, I can now use the available quick connect fittings for the pressure hose hook up. Makes the pressure hose hook up much faster and less fiddly. I also use a quick connect fitting on the garden hose input. No special engineering needed for that, just visit your local home center for the adapters.

Given the limitations of a consumer grade electric power washer, I really like the AR383. Much better that the two previous yellow washers. Way less trouble than using a gasoline powered washer. And with my qc mod, I can use all my other hoses and wands.

Want AR Blue Clean AR383 1,900 PSI 1.5 GPM 14 Amp Electric Pressure Washer Discount?

Our large brick patio was in need of a good washing and removal of the gunk and weeds between the bricks, so I was contemplating the electric SnapOn2000psi from Costco, but none of the stores near us had it in stock, so went on-line and did a ton of research.

Settled on this one and am not disappointed at all.

It is far, far better than the 1600 psi until I bought at Costco years ago and gave away a year later. The biggest difference is that the hose AND cord on this AR383 easily wind up onto the base so it takes up very little space in our basement and is easy to cart around. My previous one''s hose was very stiff and had no location to wind up anything. The AR383s hose is far more flexible than many others.

It had plenty of pressure for my needs. Even our brick wall proved to be much dirtier than I realized. It had enough pressure to remove the paint from our wooden gate (oops -I just needed to back up a bit and all was well.)

The hose does NOT need to be removed from the base in order to be wound up (but yes, the handle does need to be removed... the picture is a wee bit deceiving)

I had only minor issues with inserting the wand into the handle or turning just the nozzle. It is a small learning curve.

I have had no issue with leaks anywhere. There were washers in both side of the hose connection.

I had to switch hands every so often due to fatigue, but I did not notice any excessive vibration and a simple sweep back and forth, inching forward one half a brick at a time proved to be effortless.

I loved the auto-shut off. Especially when one wants to quickly silence the noise so you can hear your kids.

I would have liked to spend $40 less on the SnapOn and have the comfort of easy return, however one cannot buy/use what is not available, so I am quite happy with this purchase.

On the box, they show several attachments that are optionally available (a 75 degree angle head, some rotating brushes).

Save 18% Off

Read More >>

Watts 116011 Standard Faucet Save 10% Off

• Air Gap faucet to meet plumbing codes for reverse osmosis units
• Meets all low lead NSF requirements
• Multiple colors available for custom kitchens
• Fits all under counter reverse osmosis water filter systems
• Uses 1/4" Supply Tube

This is *almost* identical to the chrome faucet which Watts includes with the WP-5 reverse osmosis kit. Hold the lever down to dispense water, or snap it into an up position to have it stay on.

Quite a bit of noise can be heard through the air gap hole while the RO tank is filling. It sounds similar to someone a few houses down spraying water from a hose into a small pond.

This faucet works well, except for one important installation caveat. Unlike the chrome faucet included with the current version of the Watts WP-5, this replacement does not include a flow restrictor. And, the flow restrictor included with the WP-5''s chrome faucet doesn''t fit into the red waste tube of this black faucet -the red tube''s inner diameter is too small, even though its outer diameter matches the red tube from the chrome faucet (1/4").

I found out the hard way that the flow restrictor is needed to reduce the flow of waste water from the membrane. Without it, water will go gushing down your drain via the black waste tube on this faucet -but a good bit of water will also continuously spurt out the air gap hole (onto your counter and hopefully not far from your sink).

So, if you have a current model WP-5 which includes the newer chrome faucet that matches this one, you will need to need to cut off a length of the red tubing from the chrome faucet. Then, insert the flow restrictor (a red, plastic, spiral shaped piece) into that red tubing. Then, union it to the black faucet''s red tubing using a 1/4" Watts Quick Connect -you can get this part at the big home improvement store. Then you are good to go ahead and connect the red tubing to the manifold''s drain port.

Final note: the WP-5 installation manual is decent, but has a few errors and and a few items that are out of date. This flow restrictor, for instance, was apparently built in to the manifold assembly before. With my unit, however, it was in a special baggie inside the chrome faucet box, with an attached page containing installation instructions for that part. Apparently, Watts changed the parts and install procedures, but didn''t fully document it and didn''t update the replacement faucets to include the required tubing inner diameter and flow restrictor part.

Save 10% Off

Read More >>

Gaggia 102532 Espresso-Pure Semi-Automatic Espresso Machine Save 33% Off

We purchased this machine just after Christmas, and have fallen in love with it since then. We were looking at another, better-looking espresso machine, but were advised to get the Gaggia by some friends. This is our first REAL espresso machine, I had a Mr. Coffee machine years ago that worked all right, but the Gaggia Pure is head and shoulders above that one. It makes great espresso, although we are still working on getting great crema out of it...sometimes we do, sometimes we don''t (this could easily be our fault). The frothing nozzle is also great, and although it''s not as fancy looking as the all-stainless model we nearly bought, it is still a nice looking machine.

Negatives: no warming tray, and the first shots take awhile as the machine has to warm up first. This might be true with most machines, and it''s not a big deal for us. We start it up, prep the milk and cups for a few minutes, come back and its ready to go. Subsequent shots go much quicker.

We would definitely buy this machine again.

Seemed complicated at first, but is actually quite easy after the first time or two. Yummy espresso. Foaming wand makes thick, delicious foam for cappuccino. Easy to clean. The pump is quite loud when passing water for the espresso, but that''s only a minute.

Buy Gaggia 102532 Espresso-Pure Semi-Automatic Espresso Machine Now

I am pleased with the Espresso Pure for my entry-level espresso maker purchase. I wish it had a warming plate, but as another reviewer said, the body is all plastic. I also purchased the Baratza (or is it Solis? I''m confused about the relationship of those two companies) Maestro Plus grinder for around $140 and they work well together. You do have to spend some time breaking in the machine and experimenting with grind size and tamping pressure. You also have to let the machine heat up well, at least 8 minutes. But after I turn on and let it heat up, it doesn''t take me more than 5 or 6 minutes to make a latte or cappuccino.

I like the size of the water tank because there are only 2 of us. I also like that there is enough clearance for a standard 8 oz mug beneath the portafilter. The steam wand produces great foam with whole milk and there''s enough clearance there for a 2 cup Pyrex measuring cup. Yet the machine does not take up a lot of space in fact it''s less than the Mr. Coffee machine it replaced.

I think its interesting the Espresso Color got higher reviews than this one, because they are the same machine. The Color is $50 more, but otherwise they are exactly the same. And I read on that the red colored paint starts chipping off after awhile.

For now (1 month after purchase) and for what it is, I think it works great, and at a young, frugal person kind of price.

Read Best Reviews of Gaggia 102532 Espresso-Pure Semi-Automatic Espresso Machine Here

Yes, you do need properly ground coffee to make the best of this machine. However the $ Capresso Infinity is fine for the job. This is an impressive machine for the money but it does have a learning curve. Follow the directions in the book, get a tamper that is sized to the portafilter (58mm), use some fresh roasted ESPRESSO beans and you''ll be making coffee better than 95% of the shops with a little bit of practice. One added suggestion, a ridgeless portafilter, which allows for better tamping.

Want Gaggia 102532 Espresso-Pure Semi-Automatic Espresso Machine Discount?

Received the Gaggia Expresso Pure at the end of May 2010 and loved it for 3 months made great coffee. In late August the knob started disfunctioning more and more. Finally figured out the metal it was on was getting so hot it was slowly melting it. Then in early September steam started coming out everywhere and water dripped even when it was turned off, and it always dripped through the coffee filter whether that button was pushed in or not. Called the company they made us go buy their special cleaner that would fix all. It did not. They had us take it apart several times before they finally said to send it in for them to fix. We did hear they received it, but have not gotten it back and it is now January 2011. Do not buy this machine unless you want to throw your money down the drain.

Save 33% Off

Read More >>

Clorox Sales #35512 Brita Replacement Filter

Item successfully fit both pitcher and refrigerator water dispensers. So, a good replacement that was low in cost and did what was desired. Expect to order more in the future.

I have been using the Brita water filter (with pitcher) for years now. I highly recommend it. Once you taste pure, filtered water you will never again go back to drinking tap water, with all its flouride, lead, chemicals, and other pollutants again.

for the sake of your health, this is a great investment for clean water.

* highly, highly recommended *

Buy Clorox Sales #35512 Brita Replacement Filter Now

Read More >>

Aprilaire 4040 - Humidifier 24V Water Solenoid Valve Save 54% Off

• Replacement solenoid value for Aprilaire Humidifier models 220, 224,330, 400, 400A, 400M, 440, 500, 550, 550A, 558, 560, 560A, 568, 600, 600A, 600M, 700, 700A, 700M, 760, 760A, 768.
• The #4040 solenoid valve includes a new inline strainer (pre-inserted in inlet side of valve), and a compression nut & washer for the inlet side only.
• 24 VAC
• 2.3 Watts

The purchase experience was good. It took about a week to get the part and it appears that most of that time it was in transit. This is long but not a big issue.

There was no documentation that indicated that the valve had an input and output (i.e. flow direction). There also wasn''t any indication that the valve can be mounted in either a left or right orientation. As it turns out, there is an arrow on the valve that indicates flow. Additionally, there is a screw on the side of the valve that allows it to rotate allowing either left or right mount.

In the end, this is a good product with nice features and better documentation would make this an EXCELLENT product overall.

Buy Aprilaire 4040 - Humidifier 24V Water Solenoid Valve Now

I read the reviews about this product. I was concerned about the "Solenoid not included" comment so I email the company. They quickly responded that the solenoid was included. I ordered the product. It does not come with instruction but there are only two wires and an in/out for the water which is marked with an arrow. Hard to screw up! Took me 20 minutes to install mainly because it''s hard to reach behind the water heater.

Bottom line easy to install, stopped the leak problem I had with the original part. What else could you ask for?

Read Best Reviews of Aprilaire 4040 - Humidifier 24V Water Solenoid Valve Here

Both of the other reviews indicate that this is a solenoid valve assembly but it is NOT! The picture you see is NOT what you get. The picture is for the solenoid valve assembly (which is what I thought I was buying).

This particular product is the transformer. It was a stupid mistake on my part trusting the review and the pictures. Too bad shipping was $9.00, as now it''s not worth it to send it back.

You want this product instead if you''re looking for the solenoid valve assembly:

4040 Solenoid Valve Assembly

Want Aprilaire 4040 - Humidifier 24V Water Solenoid Valve Discount?

I purchased a aprilaire water valve 4040 and i received a valve made by generalaire model ga4040.

I thought i could use this valve but this valve is not what is pictured and the mounting bracket does not mount to my aprilaire model 760. (also water inlet is on wrong side)

I will return it ASAP

Save 54% Off

15-day complicated return policy. The valve did not work. Must call seller to request for return authorization number; email was not good enough!

Read More >>

Rowenta IS9100 Precision Valet Commercial Full Size Garment Steamer Save 33% Off

I recently returned the Rowenta Pro Compact steamer in exchange for this "commercial" steamer.

It certainly is a big improvement. The extra 150 watts of steaming power makes a noticeable difference.

There are several features that make this a wonderful unit. The large 1 gallon water tank is clear and easy to remove and refill. The on/off switch and the automatic cord reel are both foot actuated. There are two onboard accessories bins that keep the attachments from disappearing. The steam is powerful, plentiful and literally rolling out in 60 seconds. Also, the unit is quite sturdy.

Unfortunately, there are a few design flaws and disappointing problems. The two large wheels do not roll on my hardwood floors nor on my carpet. Instead as you drag the machine it leaves a nice trail of marks on the floor. The telescoping handles are not secured into the base of the machine and pull out when you attempt to lift the machine. Also, this unit did not come with a handy plastic brush attachment that the cheaper unit did.

Having said all this, the Rowenta Precision Valet Steamer does a wonderful job of removing stubborn wrinkle quickly and easily.

I have used a steamer (different brand) for the last 4 years minus all the nice amenities that the Rowenta IS9100 model has. Last month it started leaking which could not be repaired so I was on the hunt for a new steamer.

I was going to buy the same steamer and then I saw this Rowenta Model IS9100 Commercial one and with all the amenities and I decided to buy this and give it a try. After researching "everything" that was out there on clothes steamers, the Rowenta rose to the top of my list for several reasons. The larger water resorvoir which is fabulous! I can steam many more items now without having to stop and refill it...VERY nice feature.

The adjustable handle is also quite nice, allowing me to push it down and slide it out of the way in my laundry room. The efficient and FAST operation of this unit is also very very good. Seems like you don''t even wait a minute or so and you have HOT steam and ready to rock and roll! (As much as you can rock and roll while steaming clothes ;-) Less expensive steamers take 3 to 4 times longer to heat up, so this is a great feature. Also very hot steam...be careful ladies, this is a wonderful feature for getting out those really stubborn wrinkles, but it really smarts if you accidentally get a thumb in the way ;-)

The automatic cord rewind is another great feature. Before with my old steamer I had to wind my cord around and around and around my stand, which usually fell down anyway.

The garment rack on top is also great...just throw your shirt, sweater over the shoulder forms and steam away....then slide your hanger on and hang up...viola...done...kaput....give me the next item to steam. It rolls great and overall this is one top notch steamer.

So, if you are in the market and looking for a solid steamer...you won''t find one better than this! I love mine! (If you couldn''t tell ;-) You really will not find one better. Remember that old saying "You get what you pay for"...well this is worth every cent!

Halle'' Hudson

Spring, TX

Buy Rowenta IS9100 Precision Valet Commercial Full Size Garment Steamer Now

I have to wear business attire to work everyday. I bought this steamer with the hope that I could cut down on my dry-cleaning bill and avoid the chemicals used by dry cleaners by doing my own ironing. I was particularly hoping that I could use this to handle washing and ironing my dress shirts, which become wrinkly after a single use and dirty after a couple wears. I have a regular table iron that I have used for over a decade to iron my clothes, but it simply takes too long to adequately iron a dress shirt. I was hoping this steamer was the answer to my dilemma; unfortunately, it isn''t.

The steamer simply cannot handle dress shirts adequately, other than taking out simple creases on the flat areas of the front and back. If you have a freshly washed cotton dress shirt that is nice and wrinkly out of the dryer, look elsewhere for help. And forget about ironing the sleeves; anything other than a minor touch-up and you''ll be disappointed. If you''ve seen the video of the unit on Bed, Bath and Beyond''s website, don''t be fooled (like I was). The unit doesn''t work quite as effectively on dress shirts as the video indicates.

The main issue -as far as I can tell -is that the unit suffers from a design flaw; there is no backboard against which one can press the shirt, so one has to akwardly pull down on the shirt, making it impossible to avoid unintended creasing. Perhaps if there was a clip on the bottom that one could use to keep the shirt stretched out (like the comparable Haan unit), it would be easier to maneuver around some of the tougher parts of the dress shirt, like the sides and sleeves. But because the unit has no such feature, you have to use your off hand to pull the bottom of the shirt so that it is straight enough to be ironed. Not only is this ineffective, but it''s dangerous, as you are constantly at risk of steaming your hand (which I almost did twice on my first try).

To Rowenta''s credit, the steam hose seemed to work well and the pressure of the steam was constant. I tried the unit on some of my dress slacks and suit coats, and it seemed okay for purposes of minor touch-ups as to those items of clothing. But I''m not convinced that this limited usefulness is worth the price tag. Also, I''ve read some reviews in which users complained about the wheels; the wheels are a little sticky, but I did not have major issues with transporting the unit around my apartment (on carpet, rug, or hard-wood floor). Overall, the unit is relatively sturdy, so I wasn''t really worried about tipping the unit over. A minor complaint is that the handle where the hose is supposed to rest is also where hangers are supposed to be placed, so you have to hold on to the hose when taking items on and off.

Bottom line for me: If the unit worked well enough to serve as an adequate substitute for dry-cleaning my dress shirts, I would definitely keep it. But because it doesn''t, I will be returning it. If you don''t need it for dress shirts (other than minor touch-ups), this might not be a bad option for you.

Read Best Reviews of Rowenta IS9100 Precision Valet Commercial Full Size Garment Steamer Here

Simply amazing!

I was shocked to see the wrinkles disappear from my pants and shirts. I never knew how clothes could be restored so easily. Using an iron never quite got the garment looking perfect. This unit does. It was fun just to steam everything in sight from neckties to polo shirts. It is a good investment. You will not be let down.

Want Rowenta IS9100 Precision Valet Commercial Full Size Garment Steamer Discount?

The on/off operating button went kaput after three and a half months of use. My only recourse is to ship it to the closest service station (that would be in Colorado: so convenient that I''m in Minnesota) for a three week wait until they can look at it.

Seriously, how much freakin'' research do I have to do before I buy something? Colorado? Three weeks? My boutique can''t wait that long; guess I''ll have to buy another one that has far better customer service than Rowenta.

Save 33% Off

Read More >>

Shop-vac 901-13 Super Performance Reusable Dry Filter Save 28% Off

This filter fit my old Montgomery Ward shop vac perfectly and is working just fine. The old filter was just a foam sleeve. I got a new foam sleeve and this filter fits over it. This should extend the life of the vac another 40 years.

My Shop-Vac is a 12 Gallon Model 800L. In 2010, I added a Trash Can Cyclone Lid w/ a 5-gallon bucket to create a 2-stage system.

After having a malfunction that clogged the paper filter, I browsed the Shop-Vac website for a solution. I equipped the 800L with a

Gore CleanStream-Gore HEPA Cartridge Filter (Shop-Vac 9034000) and a Disposable Collection Filter Bag (906-62-00).

This created a 3-stage system that is effective for filtering all but the extremely finest dust.

I also replaced the Reusable Disc Filter on my Mini-Vac with a Super Performance Dacron® Cloth Filter (901-15-00).

I also purchased a Super Performance Dacron® Reusable Disc Filter (901-13-00) and a 3-Pack of Reusable Disc Filters (901-37-00) as backup for both vacuums.

Buy Shop-vac 901-13 Super Performance Reusable Dry Filter Now

Read More >>

Lasko THF15 Humidifier Filter

These filters are only $4.00 plus ground shipping (which goes up a little for each additional filter) on the lasko website. Why anyone would pay over $10 with shipping for it here on amazon is beyond me.

Well, if you have a humidifier that requires this size filter, then you have no other options really. These filters can last for about 5 months if you have extremely low mineral content water. In Tucson, AZ where the water is very hard we only get about 2.5 months out of one of these.

Buy Lasko THF15 Humidifier Filter Now

Works fine we can''t tell the difference between this filter and the one that came in the original box.

Read Best Reviews of Lasko THF15 Humidifier Filter Here

I saw they think you get them cheaper from lasko. from what I see you get 2 filters here but only 1 from lasko itself. 5 for 2 is cheaper than $4 for 1. but in any case. seem to hold up well. good product and shipped fairly quickly

Want Lasko THF15 Humidifier Filter Discount?

The Lasko humiders were return because of a severs leaking problem. Iam know stuck with a filter that I have no use for. I will try very hard not to purchase any items with outside vendors

Read More >>

Hamilton Beach 49995 FlexBrew Single Serve Coffeemaker

I am very fussy about my coffee maker. If the appliance is too expensive, too bulky, too complicated, too messy to clean up, etc., it doesn''t stand a chance in my three cup a day kitchen. We got this little beauty day before Thanksgiving, just in time for the holiday dessert table. I can''t say enough about it! There are three ways to make your favorite coffee: 1. regular ground coffee goes into the basket (no filter needed) or 2. you can use a coffee pod or finally, for those who like variety, 3. K-Cups are easily inserted into the removeable slide-in tray. To allow for two sizes of coffee cups, the lower portion of the unit lets you place either a large travel mug on top, or flip it over for a higher ledge to place a smaller mug. Water in the back, press the button, and within minutes you''re drinking a hot cup of joe! Realizing it''s only a single cup machine, we don''t expect to use this when we have more than a small handful of guests. But for the daily cups there is nothing better. We love how quickly you clean up, a simple rinse of the grinds from the basket and you''re set for the next cup. Instructions say to run a solution of 1/2 cup white vinegar and 1/2 cup water through the unit every month or so to clean it out. This makes more sense than the more costly machines that require descaling and fancy solutions in order to keep the coffee tasting great. It''s a tall and thin machine, so you easily slide it beside other kitchen appliances without taking up much counter space. Black and stainless steel finish go with everything. I have other Hamilton Beach kitchen apppliances and honestly have not been disappointed yet. This coffee maker is a keeper!

From my wife Sarah: This is great! At around 1/2 the cost of a Keurig, we really like it. Here''s why:

It''s super easy to use.

It makes good coffee.

You can use any of the K-Cups, and you can also use your own ground coffee beans. I like this option.

It turns itself off so you won''t leave it on by accident.

It looks very slick and fits in nicely with our kitchen with black and stainless steel. It doesn''t take up a lot of space.

It''s very easy to clean.

What else could you want!

Buy Hamilton Beach 49995 FlexBrew Single Serve Coffeemaker Now

I never considered buying a Keurig Coffee Brewer due to the high cost for the maker, the cost per cup of coffee, and the mixed reviews on flavor. When I received my " ", I wasn''t expecting too much, but was pleasantly surprised and impressed. I went out and found my favorite "Eight O''Clock" brand coffee available in K-Cups and on sale at my local supermarket. Setting up and using the Hamilton Beach FlexBrew was simple and fast. My first cup of K-Cup coffee came out perfect. I was impressed. Despite maxing out the water capacity at around 10-12oz, the coffee was not weak or odd tasting. It was a perfect cup of coffee. Next, I tried brewing a regular cup of coffee using standard coffee grounds. The results were good, but not as good as my old $14 Black and Decker 1 cup "Brew N Go" coffee maker. The coffee was good, but tasted a little "off". I tried a couple of other cups adjusting the amount of coffee, but the results were the same. It was by no means bad, but I just like the taste of my old maker, and the K-Cup coffee better. Brew time was fast. It takes a little longer to start brewing, but once it starts, it flows faster than my old machine. Total time is about the same. About 3-4 minutes. One thing that is much better than my old machine is that the FlexBrew''s coffee is hotter. All in all, the Hamilton Beach FlexBrew Single-Serve Coffeemaker is an impressive machine, at a very good price. As long as you''re not looking to make a large cup of coffee, I recommend it.

Pros:

Very good tasting coffee.

Less than 1/2 the price of an average Keurig machine.

Compatible with coffee grounds, K-Cup packs, or soft pods.

Easy to use and convenient.

Well built with stainless steel and dishwasher safe removable plastic parts.

Cons:

K-Cup packs cost per cup.

Maximum 10-oz brewing capacity.

Travel mug not included.

Results using regular coffee grounds are good, not great.

Update 02/2013:

I left my original review up to show that I was at one time happy with this machine. Unfortunately, 2 months later that is no longer the case. I''m experiencing the same "water shooting all over the place" that others reported. The problem are that the nozzle that punctures the K-Cup is either no longer sharp enough to puncture the K-Cup fully, it gets clogged with coffee, or it has shifted to the point it is no longer puncturing it correctly. Either way, these are serious flaws that seems to pop up over time, or in the cases of some other reviewers, affects the coffeemaker right out of the box. Another issue is that sometimes it punctures the cup correctly, but water pressure builds up shooting water all over my kitchen after brewing a partial cup of coffee. I definitely can no longer recommend the Hamilton Beach FlexBrew Single-Serve Coffeemaker.

Update 03/11/13:

I received a replacement unit from Hamilton Beach. The first thing I noticed is that the new coffee maker comes with another basket for using coffee grounds. This extra basket was not included with the first coffee maker. I''ve used the coffee maker several times using grounds and K-Cups. So far it works perfectly. I''m skeptical though since my first one worked perfectly too when I first used it. Has the design been improved, and the bugs worked out? Only time will tell, but it is only fair to report that Hamilton Beach seemed concerned about the problems being reported, and they did send me a working machine.

Final Update 03/14/13: Well, it didn''t take long for my replacement coffee maker to show its true colors. After brewing about 10 or so K-Cup cups of coffee without incident, the new HB 49995 coffee maker decided to spray hot water all over my kitchen. It brewed about 1/2 the cup normally as it should, but apparently as some others have pointed out, the HB 49995 just isn''t strong enough to force the water through the K-Cups all the time, resulting in pressure buildup until the water has no place else to go but out the top of the K-Cup holder and all over your kitchen. This is 2 coffee makers now that exhibit the same exact problems using the K-Cups recommended by Hamilton Beach. I''m done messing with this thing, and highly recommend you look elsewhere.

Read Best Reviews of Hamilton Beach 49995 FlexBrew Single Serve Coffeemaker Here

My wife was all excited when I showed her this coffee maker and told her it can use ground coffee or K-Cups. We currently have a Black and Decker 1 cup coffee maker and although it makes a great cup of coffee, it isn''t the prettiest coffee maker to leave on the counter, it only lasts about a year before you have to toss it and buy a new one and doesn''t fit her taller Christmas mugs. On to the Hamilton Beach...

I put both coffee makers side by side and the Hamilton beach is a lot bigger but it has a very attractive brushed metal finish and it will handle both small cups and tall mugs by just flipping the base. Cool!

I used the quick start guid to make our first cup of coffee on the new coffee maker. I was using ground coffee (Dunkin Donuts) to make the first cup so I removed the K-Cup holder and spooned in 2 Tablespoons of coffee using a regular (not measuring) tablespoon. I noted there is a max fill marker in the basket and I had filled it too much so I removed some coffee and shook the basket gently side to side to ensure it was below the max fill marker. It now was. Next, I filled the water reservoir to just below the max fill marker in the reservoir. You must pour slowly because the water travels down through a funnel like opening. I put my wife''s tall holiday mug underneath. It fits! Hooray!!! I press the start button and walk away to make an omelet. I look over and about a minute had passed and no coffee was dripping yet but it sounded like it was about to start. I was excited. I went about making my omelet. After a few minutes, my wife comes running over telling me the coffee maker is leaking all over the counter. I look and there are coffee grounds all over the cup (inside and out) and water has dripped all over the coffee maker, counter and even into the power switch on the front. All this despite the cup not being even half full! I quickly unplug it.

After I am done eating breakfast and the coffee maker has cooled, I decide to give it another try. Maybe I put in too much coffee or water? So I proceed to round two...

This time, I read the whole manual not just the quick start guide. It says not to use more than 10 oz. of water or 2T of coffee or the coffee pot may overflow. Okay, I did not measure accurately last time so but I did keep the levels below the max lines. Also, what is the point of a coffee maker that can hold such a huge cup if you can only use 10 oz. of water? I know from experience that some of the water stays absorbed in the grounds so 10 oz. of water equates to about 8 oz. of coffee. Okay, 8 oz. equals 1 cup and this IS advertised as a single serve coffee maker so I really can''t complain.

So using a measuring cup, I measure exactly 10 oz. of water and pour it into the reservoir. Next, I add exactly 2 level Tablespoons of coffee using a measuring spoon. I press the start button again. I also put the coffee maker next to the sink this time just in case. Again, this coffee maker is pretty slow. It takes a full minute before it even starts making any coffee, whereas my cheapo B&D starts in about 15 sec. The cup is about half full and no mess so far. I think I am in good shape when I start hearing weird gurgling noises and it starts spraying coffee grinds into the cup again. It only did it for about 15 seconds this time and then shut off. No water on the counter but still wet coffee grinds in and outside of the cup and on the power switch. I''m not sure if the power switch is water proof (I doubt it) but this is just unacceptable and likely unsafe.

Again, the coffee mug is less than half full. I waited about a minute to remove the cup and after I did, water continued to drip out of the coffeemaker onto the drip pan. I did not try a K-Cup but in my opinion, this coffee maker is a piece of garbage!

I''ll post some pictures of the mess and of the 2 coffee makers side by side on the main product page.

UPDATE: I don''t know why but I hate giving 1 star reviews so I tried another batch of coffee using only 4 tsp of coffee and 10 oz. water (all measured accurately). That''s about the weakest coffee I could stand. It still made a mess and spewed coffee grounds all over the cup and front of the machine. This time I smelled the burning smell that another reviewer mentioned as well. Amazing for only 3 cups of coffee with at least an hour cool down between cups!

I can''t tell you if this makes a decent cup of coffee because I have not been successful at it so far. I''m tempted to try a K-Cup but I don''t have any and I am not inclined to buy some just to test this coffee maker. If you want one of these for free, come check my trash barrel. ;-)

-Joe

Update: I bumped this up to 2 stars because I tried it with a K-Cup and it didn''t dump coffee grounds in my coffee or make a mess out of my counter this time. The coffee was good using 8 oz. of water but you only get 2/3rd a cup of coffee. With 10 oz. of water, you get a full cup but it is a bit weak. After it seemed to stop brewing and the light went out, I removed the cup. A few seconds later, more coffee dripped out. The tray caught it but this coffee maker is definitely lacking. Not recommended.

Joe

Want Hamilton Beach 49995 FlexBrew Single Serve Coffeemaker Discount?

Length:: 0:52 Mins

BACKGROUND: I am a fan of single-serve coffee machines. Why? Because it just makes sense. Most people in America do not live in multigenerational households so it is not necessary to brew 4+ cups of coffee at once. In my situation, it''s just my husband and me. I have owned the traditional Black & Decker 12-cup coffee maker (donated), Keurig Special Edition B60 Single-Serve Coffee Maker (returned), Senseo 7810 Single-Serve Coffee Maker (donated), Hamilton Beach Personal One-Cup Pod Brewer for Senseo Pods (still own for the office, but not too satisfied), Hamilton Beach Single Serve Scoop Coffee Maker (still own), and Aeropress Coffee and Express Maker (still own).

I have been looking for a well-built single-serve coffee maker for my husband''s office, since the one he has there is the Hamilton Beach Personal Cup One Cup Pod Brewer, which is a GREAT and inexpensive coffee maker, but the insert basket is fitted for Senseo style pods only and they are discontinued. So to get around this, I taught him to create makeshift pods by folding regular filters. This method works fine, except that it requires a few extra steps and my husband is not the type to want to perform those extra steps. Needless to say, he rarely uses the coffee machine because of "those extra steps." Well, I guess Keurig seems to be the only option left in terms of convenience, freshness, and taste.

REVIEW:

PROS:

+ Accepts K-Cups, ground coffee, and pods

+ Flexible cup size (can hold a tall travel mug or a smaller 10 oz. mug)

+ Great tasting, hot coffee without using a lot of coffee grounds

+ Beautiful black/stainless-steel exterior

+ Easy to operate in 4-steps (Pour in water, put in coffee (cup/grounds/pod), push lever down, press "on")

+ Easy to clean (all you need to do is dump the coffee grounds and rinse), separate parts are washable

+ More affordable than any Keurig coffee machine

CONS:

Hot steam comes out from "Push Down" lever opening

Spits coffee grinds everywhere if the amount of coffee grounds in filter exceeds maximum limit (2 Tbsp)

I am writing this review after testing it for almost two weeks. Using K-cups, the coffee MAY drip slower (it takes about 1.5-2 minutes on average to brew a cup) than a Keurig machine, but it does come out hot and tasty. On the other hand, using just the mesh filter and coffee grinds require a bit of a learning curve. The directions note that you can only use a MAXIMUM of 2 TABLESPOONS of ground coffee. While this is true, I would recommend a MAXIMUM of 2-3 TEASPOONS. Any more and the machine will "spit" coffee grinds into your cup in the last 10 seconds of brewing (VIDEO INCLUDED). I have also learned that I have had more luck with a courser grind, closer to french press than drip. Another thing that may cause some concern is the steam that comes out of the "Push Down" lever is hot, but fortunately, not burning hot. For me, I don''t mind it since I usually walk away after pressing the "on" button anyway.

In comparison between the Hamilton Beach Single Serve Scoop Coffee Maker and this FlexBrew, I would strongly recommend the FlexBrew for its versatility, convenience, and best of all, it makes great tasting coffee with very little coffee grounds. It''s ironic because for the Scoop, the more coffee you put in, the stronger/better your coffee tastes. Even 2 Tbsp may not be enough for the Scoop whereas 2 Tbsp is too much for the FlexBrew. With that said, I will be replacing my Hamilton Beach Scoop with this one.

Bottom line, if you are looking for a single-serve machine that can brew K-Cups, coffee grinds, and pods, look no further but keep in mind that this machine requires a very small amount of coffee grinds or it will start spitting all over the place (as you can see in the video).

Read More >>

10" Standard Filter Housing (Clear/Black)

• 10" Standard Filter Housing, Clear/Black, 3/4" in/out
• Filter Housings have Sturdy, Reliable Construction
• Competitively Priced
• Filter Housings come in Variety of Colors, Sizes and Connection Sizes

I bought this product to assemble myself a water filter system for less, but this filter crtridges is made cheap and leaked water on the treading nothinstanding the fact that there''s a rubber ring. Notrecommended.

Buy 10" Standard Filter Housing (Clear/Black) Now

Item was used to make a CO2 Reactor for a planted aquarium''s CO2 injection system. This unit is thick plastic and built well. The shipping was a little pricey which is why it only got 4 starts.

Read Best Reviews of 10" Standard Filter Housing (Clear/Black) Here

Leaked no matter what I did. On the black top I could not get the fittings I screwed in to totally stop leaking. I used teflon tape and did it correct. Take a hard look at it. Do you think this unit is really going to seal up and not leak? Not for me. The clear part where it screwed into the upper did not leak, but where the fittings screw in, it was drip drip drip. Should have made it more heavy duty and cut better threads. Send it back to china. Send it back to china. Send it back to china. Send it back to china. Send it back to china. NOW THAT I THINK ON THE TIME WASTED I AM GETTING IRRATE. Send it back to china.

Do you think I was too vague? Maybe I should have written this review and been more direct, you think?

Read More >>

Moen 9001 PureTouch AquaSuite MicroTech 9000 Replacement Filter Save 35% Off

• Use with 77100 faucet series
• Reduces chlorine to improve taste and odor
• Reduces lead
• Does not remove beneficial fluoride
• Average filter life 6 months (750 gallons)

I ordered and received this item in less than four days.

Great service from the supplier. The product is as specified

a filter for drinking water--it works great and makes otherwise

unpalatable water very drinkable.

Buy Moen 9001 PureTouch AquaSuite MicroTech 9000 Replacement Filter Now

This filter works well for about 9 months in my house. I would have given 5 stars if price was more reasonable like competitors other than Moen that are half the cost.

Read Best Reviews of Moen 9001 PureTouch AquaSuite MicroTech 9000 Replacement Filter Here

I got the original filter with the water filter system and it worked great for more than the 6 months anticipated. The replacement filter worked fine for about 2 months, then I started seeing small white flakes floating in the water. I ran water through the filter to see if I could flush whatever it was out, but the flakes were still there. Pretty scary. I haven''t bought another replacement filter for the system because I don''t want to waste another fifty bucks.

Want Moen 9001 PureTouch AquaSuite MicroTech 9000 Replacement Filter Discount?

These are pretty pricey filters, but are easy to install, and I have never had a leak with them. I generally using these for double the recommended replacement period since my water isn''t that bad.

Save 35% Off

just what I wanted, no problems good service good price replacement filter not exciting just find one at a good price with minimum hassle

Read More >>

Reliable V100 Digital Velocity Steam Iron

I ordered this iron to replace my piece-of-junk Rowenta DX8900. I sew and quilt alot, so I was thrilled that Reliable was offering an iron that had the option to disable the auto-off function. I also love the dual heating element feature that allows for the production of steam at any temperature setting, and the water reservoir is huge. That being said, I have found the iron to have two major design flaws in my opinion.

1. The controls are poorly located and it''s too easy to accidently change the settings while ironing.

2. The steam function has auto-shutoff. After a few seconds of ironing the steam turns off unless the iron is kept in constant, vigorous motion. It isn''t a problem when ironing, but it''s a royal pain when trying to press open a seam and other sewing tasks that use long straight motions of the iron. I have to constantly pick up the iron and shake it as I go. I don''t understand the point of the offering the auto-off disable feature for sewers/crafters and then having the steam shut off automatically. They must not have had sewers test the iron.

Unfortunately, there are very few quality irons on the market designed specifically for sewers who don''t want an auto-off iron. The Reliable V100 comes closer than any other on the market right now. Overall, I like the iron, but I really wish that someone would design one that simply stays on, keeps steaming, and doesn''t assume it knows what I want it to do.

Although the publicity states that this is made by a Canadian company, it is actually made cheaply in China. Although it ironed as well but not better than my Rowenta 8800 I returned it to Amazon because:

1. The sole plate is made in China from cheap Chinese stainless steel, the kind that stained right away and spread the stain on my trial pieces. Stainless steel is not all the same quality; this one is low quality. I don''t know where the stains came from but they were difficult to remove because unlike the Rowenta, it has a satin finish sole instead of a polished stainless sole. I also did not like the filler, awkward to use and cheaply built like the rest of the iron.

2. It is supposed to have a very precise digital control allowing the user to select high steam but low sole temperature so that the iron will not shine or burnish your clothes. It does have those controls, just like on the expensive steam generators but even on the lowest sole temperature setting with high steam selected, it immediately put a shine on my trial silk and linen pieces, even on cotton the temperature was too high when set on the lowest setting.

3. It spits, very impolite.

4. It is one pound heavier than the Rowenta and it is big.

So it would be a nice $55.00 iron but it certainly is not worth the retail price.

Buy Reliable V100 Digital Velocity Steam Iron Now

I bought this iron because I liked the idea of being able to get steam at any heat setting. It was way more expensive than most irons but the iron it replaced ran super hot and wound up damaging clothes. I was hoping that by spending more, I would get a better made, more reliable (no pun intended) iron.

This iron turns on automatically when you plug it in. Steam generation though does not turn on automatically and you must turn it on manually. Thats really not a problem for me. There is a digital display that shows temperature setting and steam setting (medium or high are the only two choices) but it does not show whether steam generation is on or off. I found that to be really annoying. The only way you really know is when you start to iron, you can hear the steam generator buzzing. The amount of visible steam is much less than other steam irons I have used so it is hard to tell if it is working otherwise.

There is also a way of turning off the automatic turn off feature. I found it worked sometimes and other times not. In addition, the iron is very slow to heat up.

I am hoping over time I will get used to the lack of a steam on indicator. Ironing was easy enough, the water tank is huge and the iron seemed to work well otherwise. Not sure if it is worth the extra money yet.

Read Best Reviews of Reliable V100 Digital Velocity Steam Iron Here

As an avid quilter I use my iron daily. This is hands down the best yet. For ironing fabric yardage just out of the drier it is a dream. The irons weight seems to melt the wrinkles right out. My husband irons his own dress shirts using the steam feature. He said the water well is big enough that the need to refill is cut down. No leaks. He had done the research and selected this make and model. We used Amazon to find the best price. I am very happy.

UPDATE: 2012 and the rubber of the hand grip is Disintegrating? Do I grip to tightly? I think not. The tiny black crumble dust must not be ironed into you clothes. It melts. For the price of this iron, I did not anticipate it to fall apart.

Want Reliable V100 Digital Velocity Steam Iron Discount?

Got this iron for Chrismas. The thing works great but...the heat and steam controls are placed on the handle directly below where the hand rests when ironing. I found that I was constantly checking to see if I was still at the right setting. The controls are easy to push and I just feel like there is potential for ruining fabric if the temp is inadvertantly switched hotter than the fabric allows. Oops there goes the polyester or silk in the trash. Oh and the iron is super heavy, just shy of 4 pounds. Rather hard to iron for a long time.

I really liked the rubber feet that are on the heel of the iron. I did not drop the iron ever like I have with my rowenta which is top heavy and tips easily. This one stayed upright with out difficulty.

Read More >>