Haan FS20 Plus Steam Cleaning Floor Sanitizer

I live in a neighborhood where EVERY home is "green built certified" this means that, to have that certification, the builder built no homes with carpet. All the main floors are polished concrete and the upper floors wood. The bathrooms all have tile and/or slate in every home.

Because of this, as you could imagine, steam mops are quite the neccessity...not only because they get the hard surfaces better than anything else, but because they are also "green" and clean chemical free. I''ll be honest, for us...that''s a bonus but we weren''t cleaning chemical free before. We like chemical free for our pet''s paws but I''ll confess I was mopping with chemicals before I got my steamer and just kept the pets out of the room while doing it because, up until then, I couldn''t get it clean any other way.

Okay, so that said...we decided to have a steamer show down to compare 5 different steamers because my friends and I knew as long as we are in these homes we are gonna have to have a steamer to get all these hard floors clean...we may as well figure out which one to buy next go round. Because my own home is graced with 2 cats, 3 dogs, and two gregarious cooks, my kitchen floor (which had not ever been cleaned by a steamer since my steamer had just arrived) was the testing spot.

Mind you, I vaccuum twice per week and do a mega mop twice a week. I THOUGHT I had pretty clean floors in spite of my pet capacity.

I thought wrong. These picked up dirt so well it''s scary

So here''s the results:

1. steam mops are the mac daddys of clean floors. What these things picked up was tremendous and no comparison to my vigorous prior constant major mopping.

2. So now I''ll break down the elements of each mop we used and then go into more detail about each at the end.

We tried out:

"S": The shark by Europro

"E" The Envirosteamer by Eureka

"H" the haan steamer

"M" the Monster

"B" The Bissell Green Tea

CORD LENGTH: so you don''t have to stop and unplug and replug in somewhere else:

Shark ( will be referred to as S):20 feet

Envirosteamer (will be referred to as E): 25 feet

Haan: (will be referred to as H)19''8"

Monster (will be referred to as M): 25 feet

Bissell (will be referred to as B) 17 feet

STEAM TEMPERATURE: this is a primary element. The hotter the steam, the more dirt picked up and hot steam will also kill parasites, mold and mildew and loosen more dirt:

S 110 degrees. lame

E 220 degrees. very hot

H 212 degrees. very hot

M 266 degrees. hottest...although the envirosteamer and haan seemed plenty hot enough. The shark didn''t clean nearly as well and this was one reason. 110 degrees just isn''t going to melt off stuck on grime.

B 125 degrees. Note that, because of this low steam temperature the manual said that if I wanted to sanitize the floor or pick up caked on spills, I had to hold the steamer on the spot for 15 seconds but no more than 20 because that could damage some floors. Now I don''t know about you, but if I can sanitize with one swipe of the other steamers because of their sanitizing temps my floor will be done WAY faster but I don''t have a timer to worry about the extra 5 secons where my wood floors could get damaged. My sink water is hotter than this so it would take less time to use a regular mop if I have to hold the steamer on every spot of my floor for 15 seconds to santize. Just sayin

BUILD:

We found how it was made corresponded with issues with the steamer. The Shark, for example, was quite flimsy and they actually sell replacement handle kits because so many people have issues with the handle breaking! We know this because my neighbor''s shark broke and the store had a replacement handle kit on the shelf because he said "it happens often". That''s an extra cost.

Envirosteamer: Was 5.4 lbs which made it lightweight but strong enough that you didn''t have to press down to clean. Very well made and strong parts

Haan: not made as well as the envirosteamer but it''s more expensive so this was a surprise. A bit flimsy and you need to press down on it more to clean at 3.15 lbs.

Monster: hefty and well made at 9 lbs but a bit too heavy unless you want a good workout. (Note: They have changed the Monster handles on the mops now and they are all plastic and people are having breakage issues)

Bissell: It''s 8.4 pounds but that includes a water filter that you have to get for this one (see notes below)

WATER CAPACITY: Very important because having to stop and add more water just adds on to the time you have to spend cleaning, especially if you are cleaning a hallway or livingroom or some other area that has no sink:

S: only holds 10 oz of water. Lasted for 10 miinutes of cleaning

E: holds 20 oz. of water. Lasted for over 20 minutes of cleaning (we stopped at 20 and it was still going)

H: holds 11.83 oz of water. Lasted for 13 minutes of cleaning

M: holds 17 oz. of water. Lasted for 15 minutes of cleaning

B: holds 13 oz of water, lasted for 12.5 minutes of cleaning AND you have to undo and remove the tank from the machine every time you fill it up then hook it back on and the steam tank is on the handle rather than the base so the steam doesn''t flow directly out after heating up which may explain why it''s not as hot once it leaves the machine. The way this mop is made the water flows past heating elements which can, according to Bissell, develop calcium deposits on it so this is the only mop where, because of this, you also have to use a water filter with it and replace the water filter when there is build up which means and extra 12 bucks every few months. The better mops are made to heat the water in a metal tank so this is not an issue and you pour the water directly into the tank.

STEAM HOLES: We found a difference although you''d think they''d all be the same. The shark only had one hole that the steam came out of so it wasn''t cleaning things on the edges, just in one spot. All the others had steam coming from bottom and sides.

SIZE: The taller it is the less stooping, the wider the mop head, the more it covers

S: 40"Hx12"Wx7"D

E: 50"Hx13.25"Wx6.75"D (the fact that this depth was smaller made it reach under applicances better...it fit better under things)

H: 50.5x11.5x7.5

M: 48x12.7.5

B: 45.25H (this was uncomfortably short) x11 x8.4 (even though this didn''t fit under cabinets because of the depth it did swivel the best)

Conclusion of comparison: First it must be pointed out that, in order to use the shark and the Bissell, you had to keep pumping the water. This was the most annoying feature of anything...the others just steamed on their own and didn''t wear out your fingers. Hated this feature of the shark and Bissell. We liked that the Monster and the Shark and Envirosteamer and the Bissell came with 2 cleaning pads rather than one. The Haan only came with one at the time of the review (I double checked since when she bought hers it was also only one and as of today, that hasn''t changed) so that ups the price even more because I can''t imagine only wanting one to clean. All worked well on sanitizing mattresses and showers. too.

But the winner picked by all of us unanimously as the mop we want to have for our next steam mop order?

The Eureka Envirosteamer. It picked up the most dirt, was made as well as the Monster but was less expensive, held the most water, emitted the most very hot steam so it sanitized as well, lasted 3 times as long with one water resevor fillup as the others, and had a cord as long as the monster. BUT if you have carpets than I would recommend the Monster because it has a carpet attachment that allows you to steam clean your carpets and it picked up pretty close to the same amount of dirt as the Eureka Envirosteamer, and had close to the same features...a bit heavier though but that may make it last even longer. It is costlier, but to clean 2 surfaces I would think that might make it worth it.

UPDATE: The Haan just started including 2 pads with the mop according to the product description page. Not that this changes our opinion since it didn''t work as well and the parts were flimsier, but it should be noted that this issue of not having enough cleaning pads has now been resolved and is equal to the other mops.

ANOTHER UPDATE: 1. The Shark came out with a new machine that holds more water and has a longer cord BUT it still only heats the water to 110 degrees so it won''t sanitize or get rid of trapped grime at this "bathwater" temperature.

Another update: I haven''t tried it yet but was told about an even better mop than the Eureka Envirosteamer but I can''t personally afford it...still, it''s worth mentioning in case you can. It''s called the Ladybug XL2300 and is a canister steam mop. It heats the water to 298 degrees (woah!) so it''s a super sanitizer but it''s over a thousand bucks. It also comes with 6 towels. I didn''t include it in my review because I haven''t ever tried it and I wanted to only include mops I personally tried but it''s got great enough stats that, even though it''s out of my price range, I thought I''d pass it on as a super sanitizer.

Also: Don''t spend money buying extra pads for the Eureka. I was in a pinch and used a kitchen dish towel...the rectangular kind...just clip on both ends. It worked just as good or better...because they are thinner so the steam penetrates faster and therefore reaches the floor hotter. However, I would recommend still only using the thick pads that come with it for your wood floors just to be safe. But the super hot steam penetrating the dish towel worked excellent on tile and hard floors. Also, you can flip both the towel and the pads that come with it on the Eureka to double the usage...when it gets dirty, just flip it over and use the other side. I use several old dish towels with this but I like best the kind that just have a bit of texture but no squares sewn on them...but they all work great. So do the pads.

I did extensive research on the steam floor cleaners. I had seen the Haan info-mercial a long time ago and also saw the Shark one as well. My research was well worth it. The Haan has definately proven itself. I have hardwood floors on the entire first level of my home and they came out looking great. My ceramic and travertine in my upstairs bathrooms looks great also. I even tried the carpet attachment on the landing and in one of the bedrooms and I can really tell a difference. You do not need to fill too often and the area of steam is in way excess of the other steam cleaners on the market. It is light and easy to use. I also did my homework on price and Amazon even beat out QVC.

Buy Haan FS20 Plus Steam Cleaning Floor Sanitizer Now

The Haan Steam Cleaner w/carpet attachment is fantastic. It''s so easy to use, lightweight, and cleans tile floors so clean. I pulled off the pad after it cooled down and there was more dirt than I thought my floors had. I tried the carpet attachment on a greasy footprint that is just in front of my garage door. It cleaned it up pretty good, but I just scrubbed it with a little dawn dish soap to remove any lingering grease. Looks much better, but I''ll try it again after it dries. Why didn''t I buy this earlier? I''m glad I caught the info commercial. I couldn''t stand the smell and sticky floors that the Swifter left behind. Plus, no more filling up my garbage with disposable pads. The Haan pads are washable! I''m going GREEN!

Read Best Reviews of Haan FS20 Plus Steam Cleaning Floor Sanitizer Here

VERY HIGHLY RECOMMENDED! I purchased my unit to remove stubborn spills and stains from our radiant heated tile and hardwood floors. We have one large (105 lb.) dog (four dogs when our daughter brings her three for a visit) and two teenagers still at home. So there are always spills and stains on the floors. The radiant heat is great, except it really bakes on spills. The worst of them, and this is the primary reason I purchased the unit, is baked on dog drool. Whether from giving the dogs treats, or from residue on dog toys, that stuff has proven to be almost impossible to remove by conventional means--at least not without spending an inordinate amount of time working on them. I tried conventional mopping, scraping with a razor blade, and even using a car buffer to rub them out. Nothing worked satisfactorily. The Haan removed them all easily! The kids spill little blobs of milk on the dining room hardwood floor as they traverse through the room, and we also had a lot of trouble removing those after they "cooked." Using the products recommended by the manufacturer of our wood floor would only remove them after a lot of scrubbing, and often you had to "hit" those several times to get them removed. Again, the Haan removed them easily.

I had researched this purchase by reading beforehand the buyer''s comments posted here. One of the comments I saw a couple of times concerned the leaving of streaks on the floor after cleaning. I observed this also, but noticed that it was due to the pad being excessively soiled. Our floor was cleaned by vacuum before steaming it, but it was still heavily soiled. The pad collects that grime and when it reaches a certain "saturation" point, it simply smears some of that grime around, thereby leaving streaks. I tested this theory after noticing that after cleaning our large kitchen for quite some time, I was beginning to see some minor streaking being left behind. I examined the pad, which was brown with soil. I changed it to the clean spare pad, and the streaking stopped. Based on this, I''m confident that as we use this steamer and the floor gets increasingly cleaner, streaking will be minimized if not absent altogether.

We have not tried the Sanitizer Tray yet, so we cannot comment on its efficacy.

Suggestions/Criticisms

The handle on my unit will not stay locked in the upright position when at rest. Even when the handle is retracted to its shortest length or the cord is not coiled for storage. It''s not a "show stopper" for me, just an aggravation.

Power cord management is just weird they way it''s implemented. The design is poor and results in the cord often not being managed at all--it just falls out of whatever clips or guides are present. Again, it''s not a big deal. I solved some of that with some nylon cable ties.

Grout lines don''t really get cleaned as the pad fibers are not long enough to get down in those little trenches--at least on our floors. It might be kinda neat if there were a special pad with a design just for that. I see some vinyl floors that also have rather deep embossments where this might also be an issue.

Want Haan FS20 Plus Steam Cleaning Floor Sanitizer Discount?

The steam mop does everything it claims to do. I am glad I also got the carpet attachment. I have not used it on carpet yet, but I have used it on my mattress, since I have dust allergies. If you are purchasing this item I would HIGHLY recommend also getting 4 extra pads. (It comes with only two.) If you don''t switch the pads freqently they become saturated and don''t work nearly as well. The six pads get me through one full tank of water. My floors feel very clean and look great! Also, no more sprays or chemicals to buy or run out of! Recommended 100%!

Read More >>

Jura Ena Micro 1 Save 33% Off

To start, if you are shopping for an espresso machine with and attached steam wand, this doesn''t have one. So if that is a must-have feature for you, this machine doesn''t have it. However if you''re shopping for a machine that makes a perfect shot of espresso using freshly ground beans for every cup, while taking up as little space as possible, this Jura Ena Micro 1 might just be what you''re looking for.

Compact Design:

While the size is compact (for an espresso machine of this quality), it''s still very heavy. In the video, you can see I have my Breville BKC700XL Gourmet Single-Serve Coffeemaker set up next to it, and the Breville is slightly similar in size. The Jura is definitely longer than the Breville, and when I lifted them both (empty), the Jura outweighed the Breville several times over. So you will need a deep and sturdy surface to set this espresso machine one. It would fit perfectly on a kitchen counter, without taking up nearly as much space as many of the other larger models.

As mentioned before, this model does not have a steaming wand. The lack of an attached wand actually helps add to the Ena Micro 1''s less bulky design. This is a plus for those who don''t use the wand on a regular machine, those needing to use as little counter space as possible, or those who have their own separate milk frothers already.

Set up:

Setting this machine was fairly simple. I used the included instructional booklet and found the steps clear and easy to understand. The machine goes through a very short cleansing process the first time you turn it on for use, so reading the directions will help aid you through the steps. There is an included water filter, and taped to the inside of the "welcome kit" box, is a water hardness test strip. If you should choose to not use the water filter, there are instructions for using the strip to test your water and then setting the machine to work best with your waters hardness level. There are no extra water filters included, just the first one to use for the initial set up and first few months of use.

Settings:

While the design is simple, there are several settings options on this Jura for you to chose from. There is a hidden nob on the top of the machine for you to adjust the grind of the beans. The pour spout has a good range of adjustment up and down for your various cup sizes. Super tall or ultra short, there''s a setting for it. The touch buttons on the top allow you to chose from 2 different strengths for your shot and 3 different sizes.

Clean up:

The beans that are ground are automatically emptied into a hidden internal storage bin. In addition, the machine cleans itself with hot water and empties into a hidden tray inside the machine beside the used ground beans. The Jura notifies you with a small subtle light when either of these areas need emptied. To clean, you pull out the tray and both the used cleaning water and the coffee grounds are inside. Be very careful the first time you empty these. I didn''t realize that this tray was in 3 separate sections, and in the process of carrying it across the kitchen, dumped used ground all over the place. Once discovering that the coffee grounds section detaches from the water try, I was able to clean these out without any incident.

The water reservoir is easy to detach and fill. The lid also opens in a way that you can fill the tank without detaching it from the machine. The tank is a descent size, making a good number of drinks before needing to be filled again.

Drinks:

I''ve been making tons of drinks since getting this machine. I''ve been trying out a bunch of different recipes and have pulled a ton of shots while breaking this Jura in. Every shot has been consistent and there has never been a single coffee ground in any of the glasses. The beans are perfectly ground and water reaches the perfect temperatures needed to make an outstanding cup, every time.

Conclusion:

This machine makes a lengthy process extremely simple and fast. You pour whole beans into the back tank and with the press a single button, freshly ground espresso is poured in less than a minute. No grinding the beans separately (however there are included accessories in case you do want to use pre-ground beans with this machine). No need to tap down the grounds yourself, it does it for you. And there''s no need to worry about cleanup at the time of making your cup. You can make drink after drink, and the used grounds and cleaning water are discretely stored for cleanup later. The machine is large enough that it''s definitely a full powered and quality built workhorse, but small enough that it can realistically be set up on a kitchen counter without taking up all your space. I''ve been extremely pleased the the quality of this Jura. So if you''re in the market for an espresso machine that''s compact on size and you do not need an attached steaming wand, I highly recommend this one.

Update 3-12-13:

My first "system" clean.....It is a little intimidating when you don''t know what you are doing and I honestly held off until I knew I had enough free time to fix any mistakes I made. Well, I have to report that it could not have been easier. I followed the directions and the machine did the rest. There are some things to keep in mind to make it go smoothly. First, make sure the water container is full. Second, make sure you have a big enough container to hold a mug of water. Also, the grounds container fills up to the rim with water, so when it is finished, CAREFULLY pull out the tray to avoid spillage. Keep in mind that it goes on and off many times while it is cleaning itself. The process takes about 15 minutes or so. Be patient.....and, because I am a little OCDish, I made a full cup and tossed it. That gives me 185 more drinks before I have to do it again. I have one more cleaning tablet left, so it looks like I''ll have to get some more. If they are not too expensive, I will probably clean the machine more often. It is so easy. I continue to be amazed by this machine......Espresso for Dummies....perfect for me! :-)

Update 1-9-13:

Well, I am officially hooked. I use the machine all the time and now my wife is also hooked. The Jura Ena Micro 1 is so simple to use and a real work horse. We use it at least twice/day (that''s now how many coffee''s we make, as we makea few each time we turn it on!). The only real annoyance is forgetting to put a cup under the spout and having it pour into the grating when it flushes itself.....still, it''s not even that big of a deal because I clean it after every use. In spite of the price, the is a MUST have!!!

Update 11-12:

For some reason, my machine reset itself and started pouring the ristretto size as a full cup of coffee, and the other sizes were also different. Also, I was having problems with the ground coffee. A quick call to customer service (to try to figure out what I was doing wrong)fixed the whole thing. I was on hold for less than two minutes, and spoke to a rep who was very patient and helpful. First, the ground issue. It turns out the funnel has to be placed EXACTLY as pictured on page 14 of the manual. That''s how sensitive the sensors are....I never realized it. As for the sizes, it turns out that the machine probably reset itself somehow. Holding the cup size down for 3 seconds will get it into program mode for that size. It starts pouring and when you press it again, that''s where it will be set to. I reprogrammed every size and everything works perfectly. Total time spent with customer support: less than 15 minutes. Having my machine work perfectly again: Priceless! I LOVE this machine!!!

Update 10/13:

I really am loving this machine, and have now eperimented with many different beans.....I knew this wouldn''t be good for me! Hahahaha. I am drinking iced espresso now with 3 large "shots" and it is really amazing how good it tastes. The only thing that I wish I had was a steamer/frother to make cappucino. This is just such a solid piece of equipment. We use it at least once/day. The other day we had a little party and made over 40. I wish there was a way to get water directly into it, as the water container is small for parties, but still, it is so fast. Everyone loved it, and loved the espresso!

Original Review:

In short: Buy the Jura Ena Micro 1 if you like espresso and want a fast, compact machine without a steamer.....now for the long version:

Let me start by saying that I have never had espresso before. My wife, however, LOVES it and has always wanted me to try it. Well, I finally did, and I have to say, I kind of wish I hadn''t. Keep in mind that I think I couldn''t tell a mediocore shot from a good one, but it was GREAT! I have been using the Jura Ena Micro 1 for about 2 weeks now, and EVERYONE loves it. Guests, family, friends ALL comment on how good it looks (it looks really great, very sleek). It grinds the beans for you, (reading the instructions warn you of using grounds that are too fine because it could damage the machine). You can use ground coffee, but instructions say not to grind them too fine. Every cup/shot is fresh....and delicious! You have everything you need here, and at this price, it should. It does not have a ateaming wand, but I don''t think I need it (or maybe I do, remember, I didn''t think I would like espresso).

The Micro 1 allows you to pick 3 different sizes and 2 different strengths. If you are sensitive to caffeine I would recommend the smallest weakest unless you have to build a barn or something.I wsa pretty wired when I made my first ("supersized"), but at least I got a lot done.

I love that you put the beans right in and leave it. That should create some extra counter space. This is a completely self-contained system. My wife loves it (and so do I). The Ena Micro 1 does everything you need it to do except hold the cup up to your mouth. So, if someone tells you, "For that price, it should grind the beans, pack it down, and clean itself," you can say, "It does." Yep, it cleans itself! How awesome is that? Ok, you still have to do a little work, but I don''t mind rinsing out the drip tray and throwing away the grounds. It really only takes a couple of minutes.

While this is relatively small, I was surprised by its weight. It is solid and appears to have been built well. Not because of the weight, but more because of how things fit together, and even the plastic feels sturdy. The machine comes with a filter as well as a water tester to tell you how hard your water is and if you will need the filter. Apparently, the machine does need to be maintained by way of descaling, but that won''t be for a while (I will update this as soon as I do it).

Buy Jura Ena Micro 1 Now

Hands down, this is the best coffee maker that I have ever used. The only thing that could make this better is the ability to provide a continuous water source to the machine. It''s not needed though because it is super easy to setup and use. It makes excellent coffee.

Read Best Reviews of Jura Ena Micro 1 Here

What''s not to love about the Jura Ena Micro 1? It''s beautiful and so sleek and makes delicious coffee. I was a little concerned when the box arrived that the machine wouldn''t fit under my cabinets where I wanted to place it, but thankfully, it was just really packed with plenty of material, so it fit with no problem at all.

I couldn''t wait to get this machine out of the box when it arrived. I drink more coffee than I''d like to admit, so I knew I''d really put it to work. I was worried about the optional filter since I''d read that it''s best to use one, but couldn''t figure out by reading online which one it actually used. I was extremely relieved to find that it came with one in the box in the welcome pack, but if you''re wondering what kind you need just to have extras, it''s the Jura 67879 Clearyl Water Care Cartridge for ENA. I''ve been using my machine for almost a month several times a day and still don''t need a new one, so it''s safe to say that they last a while.

Setup was fairly easy, but make sure you read everything carefully. If you miss one button in the code-type set up, you''ll be wondering what went wrong when it''s not working for you. I was so excited to set it up, that I missed something and had to go back and read again just to get it to prep the filter, etc.

After the set-up and a few hick-ups that were completely my lack of carefully following directions, I had it up and running. I was so impressed by the touch-screen like coffee buttons. They are glowing red emblems for coffee strength and cup size, then all the indicator ones and require very little pressure at all. Located on that same control panel, are the lights to let you know if your machine needs more water, the drip tray and ground waste emptied (they share the same drawer), more beans, or to be de-scaled. All of those things are easy to do too. The drip and ground tray come out like a drawer, the descaling is done simply by pushing a button and the beans poor into a little windowed door on the top. I usually watch my grounds, so that light never has to come on. When it gets low, I simply add more. I refill the water at least once a day and that gets me through until the next day. It''s really simple to refill the water and can just be pulled straight out of the back and around the machine once you grab the handle rather than straight up. There isn''t room for that under my cabinets, so that was a definite plus for me. It recommends that you empty the water from the water tank daily, but I must admit that I don''t. I do rinse it at least once daily, but I don''t make sure there''s no more water in it after my last use each day. I do clean out all of the water and ground waste every day.

As for the coffee it produces, it is best to wait a while for the machine to warm up, I think. Otherwise, the coffee isn''t as hot as it could be if it has been on for a while. This isn''t an issue for me, but my husband wants his coffee scalding hot. To me, it is absolutely delicious and so creamy and the perfect temperature. It has no way to froth milk, but the coffee is still somehow creamy, thick, and rich. I''ve used flavored coffee beans and plain ones and both work great. I tried using the ground coffee purchased at the store and I think it was ground too fine, because I could never get the machine to brew coffee with it. This wasn''t an issue for me, as I want to use fresh coffee beans, but I did try it for the sake of the review. I absolutely love the adjustable spout for the larger and smaller cups. I use a 16oz tall mug, so this is perfect for my cup. I always choose 2 large cups and the 1 coffee bean strength on the control panel, and that fills it with enough room left for my milk and sugar.

I can''t say how happy I am with this machine. It''s my favorite appliance and I''ll never go back to a regular coffee maker again. I would definitely give it 10 stars if I could.

Want Jura Ena Micro 1 Discount?

We have owned Jura-Capresso coffee and espresso machines for over 15 years and they have been excellent appliances. This one is no different. We have double-shot lattes every morning and my wife wanted to be able to go up to the machine and make it herself. Very few espresso, etc., machines are user-friendly. We looked at a host of manufacturers and kept coming back to Jura. We then looked at the entire line and really decided that all that milk and extra plumbing in the top-of-the-line machines was a nusance and had to be cleaned every day so that idea was dismissed. We then saw the Micro and liked it but what to do about the frother? Frothers are technique-dependent so we scoured the internet for options and came up with the Breville BMF600XL... everybody raved about it that bought it. We took the plunge and are extremely satisfied with all of the usual parameters of describing an excellent cup of "euro-style" coffee. The combination is highly recommended for moderate users of coffee. The bean and water container are rather small and we top them up every day after use.... no big deal.

One observation, we use the Micro on our kitchen countertop and the water tank is in the back; the clearance between the water tank (with its'' handle) and the bottom of our cabinet (16-17 inch clearance) is very small and so replacing the water is a little awkward. That said, we''d buy the combination again and recommend both without reservation to anyone who loves a trouble free cup of a variety of coffee drinks that are easy-to-make, render reliable taste shot after shot, day after day. There is no technique dependency in grinding beans, tamping, and frothing milk. It also makes a terrrific coffee Americano!

Save 33% Off

Read More >>

Bunn ED-17-TL In-Line Water Filter

I ordered the exact same part number that was on the old filter however the old one had a T connector at the top whereas this one had female inlet and outlet at the top and bottom. It worked but it just dangles there as I was not able to use the bracket to mount.

Read More >>

Bemis 1980 Replacement Bottle Caps

The caps did not fit the bottles on my Bemis 497-300 humidifier. They looked like they would fit but the thread size was wrong. The caps I was sent had four crenelation-gaps around the edge, whereas the ones on my unit (and the ones in the photo) only have two gaps or notches. I contacted the vendor and was told that they "should" fit. Ultimately I had to return these and order from another source and those did work. The vendor did give me a full refund but I was out the cost of shipping back the misrepresented item.

I have needed these for years for my Bemis humidifier, but never found them before. This is a, excellent product.

Buy Bemis 1980 Replacement Bottle Caps Now

The caps arrived as promised and have performed as promised. They were welcome replacements for caps that had cracked and broken after several years of use. They are just as promised.

Read Best Reviews of Bemis 1980 Replacement Bottle Caps Here

Read More >>

Inline DI Adder Kit Save 22% Off

We here in Westport WA have had a few arsenic warnings concerning the water here. I first purchased a Mikro Delta Portable 3 Stage RO System (Mighty Mite) because it was the easiest ( least expensive and most positive reviews)system to install. I discovered I needed to expand to an in-line DI cartridge to fully remove the arsenic.

Unit arrived quickly and was easy to install and was compatible with the Abundant Flow Mikro Delta Portable 3 Stage RO System (Mighty Mite) see pic.

I do not have any way to test the water, but am confidant the arsenic will be removed

UPDATE

I have just purchased a TDS meter online ( they go for around $11.00) and my DI filter is installed with the Mighty Mite filter system. The unfiltered water measured at 106 PPM and filtered 001; note this is within the margin of error so I would presume that it would actually be 0

Save 22% Off

Read More >>

Merlin Membranes - Replacement Pack

• Pair of Merlin membranes

Multipacks are the way to go. Less expensive and are not banged up when you get them. I''ll keep getting the multipacks

Buy Merlin Membranes - Replacement Pack Now

These are replacement membranes for the GE Merlin Reverse Osmosis filter. After installation the R.O. unit was delivering water at 5ppm and 750 gallons a day. I just with either GE or Hydrologic would consider manufacturing the Merlin again.

Read More >>

Melitta 1.7-Liter Cordless Kettle Save 29% Off

I have wanted a variable temperature tea kettle for a long time but as I already have a great electric pot, I was hesitant to invest another $100 or so. Leave it to Melita to offer a quality product at a more reasonable price. The kettle heats quickly, the interior is all stainless (no plastic), and feels sturdy. According to my instant read thermometer, it heats it bit high, but the temperature knob is easily adjustable so I just turned it down a bit. In four months, I''ve had no problems. My oolong tea tastes SO MUCH better when brewed at the right temperature. And green tea is not the least bitter when treated correctly :) If you enjoy tea and all the health benefits, or want to learn to enjoy it, this kettle is a great investment. Melitta 1.7-Liter Cordless Kettle

Returned after a few days because there is no discrete setting for water temperature. It had a rheostat but did not show a temperature scale. I tried it a various positions but it could not produce water at the same temperature time after time. I would check the temp with a pro quality digital thermometer and the temp would wander all over.

I paid 46.88 for the Melitta on Amazon and ordered a Saeco 101167 50-Ounce Electric Water Kettle for 39.99 that has what appears to be an accurate temp setting, digital temp display, a 2 hour temp hold feature and cool lighting system that does nothing of value but is a cute feature.

The Saeco does a better job, has far more useful features and costs about $7.00 dollars less.

Win Win!

Buy Melitta 1.7-Liter Cordless Kettle Now

For $60, this is less costly than the other digitally control kettle. And it serves my tea well. I drink green tea (matcha) and white tea (peony tea) and the boiling water kind of ''wiped out'' some of the taste.

The control is a sliding lever with a red LED. Lowest temperature is for green tea, and highest is boiling. I have been using this for over a week, several times a day.

I am sure those fancy digital kettle price will come down, but until then, this one is all right.

Read Best Reviews of Melitta 1.7-Liter Cordless Kettle Here

Pros:

quick heating

adjustable temperature by rheostat

minimal plastic exposure in the construction for plastic-phobes (only in the water level gauge)

Hamilton Beach manufactures the kettle, so it''s made by a company with a track record with small appliances

360 degree rotation on base

Cons (potential):

no audible alarm when done, just clicks (no issue for me since I use it on my desk in the office)

not insulated (again, not an issue for me, but might be for some)

temp not digitally controlled, so you''ll have to accept that the temperature setting will be within a range, not pinpoint

stupid adhesive on stupid label leaves a ghost-like residue on the outside of the kettle (if 2012 has not brought us hover cars or robot slaves, it should at least have brought us adhesives that consistently do not leave residue on products is that asking too much?)

I purchased this kettle to make coffee at the office with an aeropress, which is most effective when using water at sub-boiling temps. When I first got it, I confirmed that the lowest setting will get the water to *around* 175 degrees F pretty consistently using a cook''s thermometer. I think this is also the desired temp for certain types of tea, but I don''t know/care much about that.

It''s been working fine for a few months now, and the four star rating just reflects my subjective formula for balancing price against features I think the price is a wee inflated. I would still recommend this product to anyone looking for an adjustable temp kettle and who doesn''t get their knickers in a knot about perfectly exact temperatures.

Want Melitta 1.7-Liter Cordless Kettle Discount?

I am very happy with this kettle, although I have only had it for a week, so its durability is yet to be tested.

It is almost all metal inside, except for the lid, filter and parts of the water-level. I was worried about BPA-leaching plastic and this was the best I could find in a variable temperature kettle, especially for this price ($45 all others are usually 60-80 dollars), although it does not say that the plastic that is present inside (however little) is BPA-free. I suppose you''d have to contact the seller to find out, but it''s probably safe to assume that if it doesn''t say "BPA-free" that it''s not. In any case, I think the only ones that are completely metal inside just have one temp (boil).

The water heats up really quickly. I have not measured the temperature for each temp setting, but I can definitely tell that the water for "green tea" is adequate and does not come out as hot as for "black tea", which is boiling. There are temps marked for green, white, oolong and black, although you can slide the dial to any point in between.

It doesn''t alert you with a "beep" or anything when the water is ready, but if you are close to it you can hear it heating up and then stopping after a slight "click" sound.

The cord is rather short, but this is not a problem for me and it is one that can be easily solved with an extension cord.

Also, it shipped pretty quickly.

All in all, a great purchase.

Save 29% Off

Read More >>

Glass Tea Cup Thermos

Whenever I evaluate items, especially food-ware like tea pots, I am very focused on how easy it is to maintain them. The glass tea thermos comes with three main components 1 double-walled glass thermos bottle, one

metal strainer, and 1 plastic cap covered with some shiny metal finish on the outside. For those that are comparison shopping, I chose this item because I only make tea for myself and hate over brewed or cold tea I can''t finish in time, and I wanted to avoid plastic bottles because of concerns with hot food in plastic as much as possible (yeah, I know the cap is plastic but it''s not necessarily in contact with the hot water if you don''t fill it up all the way).

The bottle has a good weight to it and seems sturdy for a glass container. Though the opening is too narrow to put your hand in it, it is glass so it shouldn''t be too difficult to keep clean if you have the right cleaning tool. It is big enough to squeeze a sponge through it, so I''ve been doing that.

The metal strainer has a little handle that you can tilt to get it out of the way or so that you can pull on it to take it out of the bottle (just imagine the handle on a shopping basket). The strainer can snap into place in the bottle so that it won''t fall out when you''re drinking from it or pouring tea out of it. Cleaning it is tough, however. It''s small and has little bends and the edge of it is a little sharp on the sides because it''s a thin piece of metal. It''s sturdy, however, but it''s impossible keep the tea stains off with a sponge. I''ve been using cotton swabs and it''s working for now.

The plastic cap also appears to be of good quality construction and, for better or worse, it screws on without too many turns. I did a simple test of putting the cap on and turning the thermos sideways and upside down and no water leaked out, but it is a glass thermos so I wouldn''t recommend being too rough with it. Cleaning it thoroughly also required a cotton swab because of the cap''s leak resistant design. However, I expect that it will be easier to keep clean than the strainer since it''s doesn''t come in contact with the tea as much. If you want to try to visualize it, it reminds me of a screw-on cap (like a cap on a jar, but taller) with the leak resistant plug on a coffee thermos.

Now here''s the kicker that might turn you men off from the thermos. The one I received does not have that picture of the bamboo stalks on it. Instead, I got one that has a picture of a flower pot with flowers, an opened book in the center of the design, some fence thing in the background, and some small Chinese characters on the side. I found the bamboo stalks elegant, but the flower pot thing more on the pretty side. Since it''s just a tea thermos, I was okay with it (I''m male in case you were wondering), but it was disappointing since it wasn''t what I had expected. FYI, I bought mine directly from the Summit Tea Company website since they sold a variety of green teas on there and charged me only one flat rate for shipping all 4 of the items I had ordered. I contacted them about the picture so maybe the image has changed by the time you read my review, but just thought I let you know.

Overall, a solidly constructed product with some cleaning hassles (though, what tea/coffee product doesn''t?), and not necessarily the same picture as the exact item.

I wasn''t looking for a tea thermos, particularly, since I get a coffee from the corner shop every day. Not wanting to add to landfills, I would bring my own stainless steel cup with plastic lid. As you may know, stainless steal adds a metallic flavor to the drink, and plastic adds its own set of chemicals and chemical flavoring. Now that I''m trying to watch, not only what goes into landfills, but also what goes into my body, I wanted to find a safer material to hold my "acidic" fluids.

This is the thermos I''ve been waiting for! I did my half hour commute, in NYC, this morning on foot, through 30 degree weather, and my coffee stayed warm! AND I was able to hold the thermos with my bare hands. The top didn''t get hot, as it seemed to for other reviewers, but I could see that happening, if you fill the cup to the top with steaming liquids. I think a warm lid is worth it. I don''t get that metallic taste, like when using a stainless steal cup, nor that chemical flavor when using a plastic cup. No more harmful residue in my COFFEE!

I am purchasing a small Built NY insulator bottle holder, just to protect the glass during my crazy commutes. It doesn''t need it for warmth.

Buy Glass Tea Cup Thermos Now

When I first got this infuser, I loved it. Then, after using it a few times, I hated it. Now, after using it a few more times, I pretty much love it.

I bought it primarily for the lack of plastic parts. The thermos is glass and the filter and lid are stainless steel. The lid also has a silicon seal that sits under the lid. This seal was the reason why I hated this infuser until I understood how it functioned.

Making tea is simple:

* add loose tea in the thermos

* snap the filter into the thermos

* add hot water in the thermos

* screw the cap onto the thermos

A minor issue with the filter is that it lets fine tea leaf pieces through. Either the mesh is too porous or the space between the stainless steel filter and the glass thermos has fine gaps. Understand that the filter is not an infuser in that the tea is not placed in the filter, with the filter being removed before drinking. The filter remains in the thermos while drinking.

The big problem I had with this infuser was tea leaking from the lid while turning the thermos upside down to disperse the tea leaves. This only started to happen after making tea a few times. Finally, I realized that the silicon seal was not seated properly in the lid. The silicon seal became slightly warped and 1 of the 3 nibs used to secure the silicon seal into the lid popped out of its hole in the underside of the lid. The remedy was simple. Pop the nib on the silicon seal back into the hole in the lid.

The lid, like the thermos, therefore, is also chambered. Since i now remove the silicon seal while washing the lid, I wonder if water can become trapped inside the lid chamber and become a breeding ground for bacteria. I now make sure the lid is facing down while drying so that the water can drain out of the holes for the silicon nibs.

The thermos does not get very hot, thanks to the double-walled construction of the thermos and the lid. Watching the tea leaves disperse throughout the thermos while I turn the thermos upside down is satisfying, knowing that I am getting a well-brewed cup of tea. Some people may want to pour the tea into a lighter cup but I prefer to drink straight from the thermos.

The design of this infuser has been well-thought out by people who understand brewing a serving of tea from both a technical level and an emotional level.

Read Best Reviews of Glass Tea Cup Thermos Here

Stainless leaches nickel into your hot drinks searched high and low for a glass lined travel mug but there are none to be had. This is a really great substitute keeps the liquid hot for quite some time with the added purity of glass. I added an energy drink coozy -perfect. I''ll be buying more in the future for other uses.

Want Glass Tea Cup Thermos Discount?

I just got this mug, and I love it! It keeps tea warm for a lot longer than a standard open top coffee mug, but should be easier to clean than those insulated steel mugs, which which develop some wierd off-flavors with use (e.g. use for coffee once, and end up with coffee-flavored tea for weeks). I recommend this product.

Read More >>

The machine every one MUST have Keurig® Platinum B70 Gourmet Single Cup Coffee & Tea Brewing System Save 40% Off

The Keurig 48 oz single seerve brewer is super-fast and makes great coffee, tea, hot cocoa or hot cider. I love the ease of use and the wide variety of beverages you can make. It''s no larger than our previous, traditional coffee maker and it accomodates everyone''s tastes. Wonderful!

I love this coffee maker! Yes, the k-cups are a bit pricey, but for a coffee lover, it can''t be beat. I can have friends over and make a cappuccino, cup of tea, hot cocoa... something different for everyone with extreme ease and very minimal mess... Plus, the taste is amazing! The only downside is that now everyone wants to meet at my house... always! This is my 2nd Keurig, my first one got dropped while moving, and unless something changes drastically, I will ALWAYS have a Keurig!

Buy The machine every one MUST have Keurig® Platinum B70 Gourmet Single Cup Coffee & Tea Brewing System Now

I rec. mine for Xmas and love it.The K cups are much neater then my old machines messy cup that I had to grind,fill and clean coffee grinds with.This you just drop in the K cup and remove it after,NICE,and the coffee is good.There are hundreds of flavors to choose from also.I only had one problem,every time I made a cup the tank would not fill back up and the word PRIME would appear.I did what the instructions said,cleaned the tank and filter screen even though it looked fine and it would work fine for a few cups then same thing again.I live at Lake Tahoe and our water is 99% pure yet something invisible was clogging the filter screen????? The screen is just to darn fine and gets clogged way to easy.I removed it with a small screw driver,very easy to do and now it works great.You do need to clean it once in a while by running white vinegar through it but this should be done with all coffee makers.

Read Best Reviews of The machine every one MUST have Keurig® Platinum B70 Gourmet Single Cup Coffee & Tea Brewing System Here

I bought this for my daughter and fiance they love it. The blue lighting on it is really very nice.

Want The machine every one MUST have Keurig® Platinum B70 Gourmet Single Cup Coffee & Tea Brewing System Discount?

We love it. The brewer is used daily for single cups of coffee and for evening tea. The prepackaged coffee is nice, but I really like being able to easily use loose tea in the system with the filter basket.

Save 40% Off

Read More >>

Watts FP10GKT 2X10 GAC/KDF 1/2" MPT In-Line Replacement Filter Cartridge

We''re soon to purchase our third of these filters for our travel trailer. We use one per season and have been pleased with water taste and (lack of) smell.

This is a replacement for an inside drinking water filter in my motorhome. Second one, and they work great. Great tasting water where ever we go.

Buy Watts FP10GKT 2X10 GAC/KDF 1/2" MPT In-Line Replacement Filter Cartridge Now

Read More >>

Hoover Clean Water Solution Tank for Hoover V2 Steam Vac Models

Perfect fit to my Hoover, my original attachment cracked and I was worried this would not fix but it did and also arrived on expected delivery date. GREAT BUY!!!

Read More >>

Melitta U S A Inc 624602 No. 4 Cone Natural Brown Paper Filter

I made a mistake by I purchasing these prior to shopping locally, I bought a new coffee maker so I just added the filters to my order. My local store sells these for less than $3.00, and I am not talking about a Wal-Mart. These are way overpriced.

I was going to purchase these from Amazon, then I stopped in a local grocery store and found the same size, color and quantity for 3.99.

Buy Melitta U S A Inc 624602 No. 4 Cone Natural Brown Paper Filter Now

I use these filters all the time. $9.24 is outrageous. I just purchased a new box for $1.59 last night from a Grocery Outlet. My major store sells them for $3.99. But the filters are wonderful. I love them. Been using them for years. This price is waaaay out of line

with normal store prices. If you look where you normally shop for groceries you may find a better price than this. The quality of the product is how I rated this item, the price is the sellers problem.

Read Best Reviews of Melitta U S A Inc 624602 No. 4 Cone Natural Brown Paper Filter Here

great for our cuisinart and the package fits neatly in our cupboard. Only, it''s actually cheaper at a local market.

Want Melitta U S A Inc 624602 No. 4 Cone Natural Brown Paper Filter Discount?

I ordered these for my new coffee pot and it fit just right! Happy I bought it.. but I did find it in the stores that I grocery shop at here. :)

Read More >>

FMC103 DUPONT 100 Gallon Faucet Mount Filter Cartridges

These Dupont Faucet Filter cartridges FMC103 & FMC300 are rip-offs. They are prone to premature rupturing, likely due to a manufacturing/design defect and will not last you anywhere near the life they claim. The bottom seam/weld of the cartridge is very weak and will not last the 100 or 200 gallons of life it''s rated for. I have gone through three FMC300 cartridges (rated for 200 gallons) but in fact lasted less than 50 gallons of use, rendering them useless. The first sign of trouble is usually a slow drip from somewhere around filter unit; eventually it deteriorates into a gushing fountain.

Dupont Customer Service is aware of the problem with these cartridge. They told me both the 100 and 200 gallon cartridges have the same problem. If you call to ask for a replacement of a leaky faucet filter unit they will demand a dated sales receipt, etc. But if you tell them you have a defective, ruptured cartridge, they will send you a replacement, no questions asked. Obviously, they know the FMC300 cartridge is a defective product.

Never had one problem with this system in years, before would have Pur systems that would break every 3 months Dupont is just stellar. I highly recommend.

Buy FMC103 DUPONT 100 Gallon Faucet Mount Filter Cartridges Now

This is one of those "it used to be good" reviews. Bought one of these a year ago, used the FMC300 filter, which has apparently disappeared from the market according to my observations and reports on these Amazon reviews.

This product is manufactured by DuPont for Walmart and was originally billed as a Walmart-only product. It was inexpensive ($14 for the filter + cartridge, and less than $9 for replacement filters). Now the prices approach that of other brands. Replacements are about $12 for the FMC100. The empty shelf space showed a 3-pack of FMC300''s listed for just over $40. Curiously, I just checked and cannot even find these filters or cartridges listed on Walmart''s website a search on the model number or DuPont only turns up random items and/or other brands of water filters.

My main complaint about this new FMC100 is that the water tastes distinctly salty. The replacement filter should be flushed by now it has been a week since I installed it. But the salt flavor lingers, in plain water, coffee, what have you. I''m going to dig my old Culligan FM-15A out of storage and (hopefully) find a replacement filter for it. I gave up on the Culligan, which I liked, because I was having problems finding replacement cartridges.

Read Best Reviews of FMC103 DUPONT 100 Gallon Faucet Mount Filter Cartridges Here

These filters says that you can get 100 gallons of water per use, but for some reason when the filters get to around 50 gallons they just explode in the housing system. I bought this pack of three and in less that 1 month I was done with the set. At first I thought I might had one defective filter and thought nothing off it, but withing 1 week the same thing happened again. They keep breaking around the base of the filter in the exact same spot, with the filter broken the system is no good because it just leaks water everywhere. I had a Brita system for years and never had any of these problems. I wish I had keep it instead of thinking I was getting an upgrade. People save your money, do not buy this product!

Want FMC103 DUPONT 100 Gallon Faucet Mount Filter Cartridges Discount?

Water tastes much better with this filter.

Only thing annoying is that the filter cartridges are impossible to find in stores.

Never had a filter rupture like the other guy.

Read More >>

DuPont WFFM350XCH Electric Metered 200-Gallon Deluxe Faucet Mount Premium Water Filtration Filter Save 22% Off

• Easy-to-Read Electronic Display Tells You How Many-Gallon Your Faucet Water Filter Has Cleaned
• 200-Gallon Water Filter Cartridge Included for Simple Setup
• Advanced Four Phase Protection and Filtration Systems Improves The Quality and Taste Of Your Water
• Removes 99.9% of Microbial Cysts, Cryptosporidium, and Giardia
• Easy to Replace with Color-Coded Packaging

I have used Teledyne Water Pik and Pur faucet-mounted filters in the past. This filter is easy to install, and has a sturdy frame that connects securely to the faucet without leaks. It is aesthetically pleasing, although I am sure that other users may have different color preferences (another Dupont filter on the market offers different color cartridge covers in the same box). The electronic counter is unique, in that it displays gallons of water filtered, and doesn''t just indicate when it''s time to replace the filter. You have to be careful to connect the display module to the housing BEFORE you insert the water filter, otherwise it will not work correctly. If you unscrew the display after you have loaded the water filter cartridge, then you must remove the filter, screw on the display first, and then reinsert the water filter once again. The bottom line is that the water filter cartridge must be inserted after the display in order for the display to work properly. I also noticed that the counter actually measures the time the filter is in use, and indirectly calculates the gallons filtered by a predetermined formula. Therefore, if you have a low water pressure faucet like I do, the gallons that have been filtered will be overestimated. The display is not very clear if you are looking at it from an angle. The filtered water flows at a slow rate, but all filters have a slower filtered water rate, since the water must flow through the cartridge at a slow rate in order to have a good particle/chemical removal effect. The cartridge can be used to filter 200 gallons of water, and not just 100, like other filters on the market. It is therefore more economical than the competitors. Of course I have not performed any water testing to confirm that the filter remains efficacious for all those 200 gallons. That''s what the manufacturer claims. This is the only faucet-mounted filter on the market that is a 4-stage filter. It contains Microban, that supposedly prevents the accumulation of bacteria within the filter. If there is a feature I wish this system had, that would be an automatic switch back to unfiltered water that would prevent using the filter with hot water, something that can happen accidentally and destroy the filter (hot water destroys all activated carbon filters). I think that there are Culligan filters that have that automatic switch. This system is definitely worth it.

Buy DuPont WFFM350XCH Electric Metered 200-Gallon Deluxe Faucet Mount Premium Water Filtration Filter Now

This is the 3rd brand I''ve tried in faucet-mounted water filters, and this DuPont system has been a great improvement over the other two. My previous systems had much more inclination to leak -even after replacing weak parts. I have come to much prefer these heads that remain horizontal rather than the ones that flip up to engage the filter. The ones that flip up seem to start leaking more quickly, and some leaks drip down the outside of the filter down to the faucet -not very sanitary. In this unit you engage the filter by rotating a switch. It is still easy to tell whether the faucet is in filter mode or regular flow mode, and after 3 months of use, I still have no hint of a leak. I am very pleased with this filter.

Read Best Reviews of DuPont WFFM350XCH Electric Metered 200-Gallon Deluxe Faucet Mount Premium Water Filtration Filter Here

I''ve had many of the different brands of filters of this type. After having various difficulties with all of the other brands on the market, I''m glad to give this filter a five star rating. It installed easily, it has an amazingly accurate accounting of the amount of water filtered, and it has a four stage filter for the best filtering possible. I had hoped for as much from a corporation like DuPont which is certainly capable of creating this kind of product, but the proof is in the actual performance. So far, the performance is outstanding. The flow of water and the quality of the water are absolutely better than any other filter that I have tried.

Want DuPont WFFM350XCH Electric Metered 200-Gallon Deluxe Faucet Mount Premium Water Filtration Filter Discount?

I have run this set up for around 150 gallons now with great results. The back-lit display is very nice and provides a good estimate for the amount of water filtered. I have had no issues with filters rupturing and that issue could be due to high water pressure. The filter can be kind of slow sometimes but I think that''s up to pressure, most GOOD filters are slow. It''s nice not having to fill a pitcher every other glass and also the free space in the fridge. I am happy with this filter overall but only being able to find filters at China-Mart is upsetting.

Save 22% Off

Mind you I did not buy this product from Amazon but from Wal-Mart. My mother and I have used Teledyne Water-pik, Pur and I think my mother who is now in Ga is using Culligan. My family is originally from Miami and the water down there DID suck! I moved to Tampa and my mother to outside Atlanta, and we STILL had/have bad water coming from our faucets, mostly chlorine and other such unmentionables.

I remember I stood in Wal-Mart for at least 1/2 hour looking at all the selections.....I choose Dupont because 1) Waterpik and Pur weren''t very good products and 2) Dupont was famous in Miami and well known for their reputable products. My husband, who is originally from Minnesota from Scandinavian roots constantly complained about Tampa water and had insisted to buy SPRING bottled WATER, telling me that he is sensitive to the chlorine. Then a report came out that the SPRING water is actually filtered recycled water and it is getting more expensive for the bottled water! And did you know that the plastic bottles that the water is stored in when heated can cause cancer! Well, THAT was enough for me!

I told my husband I was investing in a filter system, just like my mother did years ago!

Best move I made....and he was amazed at the TASTE! He told me it was like spring water from the northen Minnesota lakes...Good!

It has been 6 weeks now and water still tastes great and no leaks! Dupont is the ticket!

Read More >>

Omnipure CL10RO-T33 GAC Inline Filter

If you ordered correctly you should have no complaints. Might take a few tanks to get the taste the way you like it but works fine.

I shopped around for this cartridge filter to match the original that came with my Spectra Pure RO/DI drinking water system. I am completely satisfied, it helps make the water taste and odor fresher. We use the water for cooking and beverages, I live in a part of the country that has extreemly hard water with high iron content and requires water softening prior to final filtration. As a bonus the price was the lowest I could find anywhere and delivery was fast.

Buy Omnipure CL10RO-T33 GAC Inline Filter Now

Read More >>