
- Slim filter housing for low-flow applications with space restrictions
- Clear styrene-acrylonitrile (SAN) for on-site viewing of flow and cartridge condition
- Use with a 10" x 2-1/2" sediment or carbon filter cartridge (sold separately)
- Initial pressure drop of 2 psi at a flow rate of 3 gpm
- Maximum temperature of 125 degrees F (51.7 degrees C)
Buy Pentek 158117 1/4" #10 Slim Line Clear Filter Housing Now
Product was as described and is very well made and easy to install. I have nothing to say to not buy this.Read Best Reviews of Pentek 158117 1/4" #10 Slim Line Clear Filter Housing Here
The line connection is the small one. If you are not intalling under the sink or for a fridge don''t get this one. 1/4 in connetion.Want Pentek 158117 1/4" #10 Slim Line Clear Filter Housing Discount?
I use it to filter oil and works great. They are the same quality as the $30 ones at the box stores.I purchased this for my CO2 laser, which uses a steady water-flow to keep the laser tube cool. After moving to my new facility, I plugged everything in and noticed there was scale and particles floating inside my $1000+ laser tube. It was cool, since it was evidence that water was actually circulating but floaties inside expensive equipment is just wrong.Once I connected the filter (and cartridge, sold separately), within 5 minutes (less actually), the water inside the laser tube was crystal clear and the black floaties where hugging the cartridge.
Will I be tasting the quality of this water? No, but it definitely is an improvement for my application.
A side note, anyone installing a water filtration system should understand about water quality before jumping in. There is a ton of online literature but understand it before installing.
For instance, filtering water can become corrosive. Unfiltered water can cause scale in delicate equipment like espresso machines and tea brewers.
0 comments:
Post a Comment