Showing posts with label mr coffee water filter replacement discs. Show all posts
Showing posts with label mr coffee water filter replacement discs. Show all posts

Culligan CW-F Sediment Replacement Cartridge Polypropylene Cord-Wound Save 22% Off

Culligan CW-F Sediment Replacement Cartridge Polypropylene Cord-Wound, 10 Micron, 12,000 Gallon Capacity, 2-Pack
  • Advanced Level 3 Filtration
  • Fits HF-150 & HF-360
  • Filters Fine (10-micron) sediment filtration: dirt, sand, silt, rust particles and scale particles
  • Cartridge life 3 months or 12,000 gallons
  • Ideal for well-water applications

So far Culligan probably has the best rating among all. But it''s made in China.

I''m worried because I don''t trust food/drink made from China. It''s not NSF''s approved list

Just search for "nsf seal water filter" and look for Culligan.Few concerns I have is we don''t know what material is used to glue things together. Some places said it could be

Melamine risin. I wish I didn''t read or know and just simply use this product. I wish this is made USA.

Buy Culligan CW-F Sediment Replacement Cartridge Polypropylene Cord-Wound Now

The Culligan CW-F Sediment Replacement Cartridge can replace the Pentek CW-F that fits a 10 inch filter housing. Note that this cartridge is 10 micron. I have experienced no problems and a proper fit.

Read Best Reviews of Culligan CW-F Sediment Replacement Cartridge Polypropylene Cord-Wound Here

As advertised, right price! I wasn''t sure of this would fit the bill, but it does exactly as it should.

Want Culligan CW-F Sediment Replacement Cartridge Polypropylene Cord-Wound Discount?

It does what it say''s it does, They last a while and I like the string type over the other kinds.

Save 22% Off

When I removed it after a months service thin fibers of the cord could be easily pulled off the filter, they could get into the water supply.

KRUPS Espresseria Full Automatic Espresso Machine Save 45% Off

KRUPS EA8255001 Espresseria Full Automatic Espresso Machine with Built-in Conical Burr Grinder, RedI just received this Krups Espresseria automatic machine. I have a Jura ENA 4 at my work so I will try to make some comparisons to them. The Jura is about the same price and they both have very similar features. I was so excited when I found out I would be receiving this Krups machine so that I can make my cappuccino at home too! I am a coffee fool so I make alot. With winter coming up this will be well used. Ok I have been using the Jura for some time at my work and it has been a very nice machine and is easy to setup, clean, and use. The Krups is no exception here as it is very easy to setup. Just fill the water container, bean hopper, set language, ML or OZ for liquid measurement, water hardness and ready to go. I use beans I buy here on Amazon. They are eight Oclock brand 50 % decaf. I chose the fine grind setting and brewed my first Cappuccio in less than a minute and the froth was superb. The coffee taste and strength is every bit as good as the Jura maybe alittle stronger with the Krups. I like that the machine is fully programable for different fill levels of coffee. You can fill one or two cups at a time. The nozzle height can be adjusted for taller cups but will not accommodate tall cups without sliding the drip tray out. The Jura can accommodate tall glasses no problem. The steam wand worked very well with no mess and produced a very nice froth and is fully adjustable for many positions. I really liked the spill tray as it has a float in it that rises to let you know when it is full. The Jura does not have this. Both machines come with a water filter to help reduce the bad flavors and reduce machine descaling frequency. The both come with a starter pack of cleaning tablets. As with any coffee espresso machine it will need cleaning to keep the flavor and machine working properly. It looks like the Krups requires less frequent cleaning. Both the frothing nozzles need cleaning frequently. All in all this is a very nice machine that will see alot of use. Oh yeah I was kind of surprised when I opened the box and noticed a small amount of coffee grinds in the machine. I called Krups customer service and was promptly advised that the machines grinders are tested during the assembly. I found no mention of this in the owners info so I was surprised but it is very nice to know that the machines are quality tested before shipping them out. Oh I should note that Jura does mention in there instructions that small traces of coffee grinds may be found in there machines for the same reason. Well I will try to make some comparisons now.

The Krups you can only use whole beans and no preground coffee.

The Jura has a bypass doser that allows you to use preground coffee.

The Jura does not come with a milk container and must be bought separately for about 80-100 dollars.

The Krups does come with its own stainless steel milk container even though it is not mentioned or shown in any of the pictures. I was really hoping it did come with it. Yeah!!

The Krups is made in France and not Mexico or China.

The Jura has a removable bean container.

The Krups does not have a removable bean container so no quick swapout of beans. Must run them all trough machine.

They both hold about the same amount of old grind cakes at 14.

The Jura needs to be cleaned every 180 cycles.

The Krups needs to be cleaned every 360 cycles. Big plus here!

The Jura takes about 44 minutes on the cleaning cycle.

The Krups take about 22 minutes on the cleaning cycle.

Both have an energy saving mode that is programable.

Both can be changed from ML to Oz for fluid measurement.

Both Krups and Jura come with a 2 year or 6000 cup warranty.

My likes about the Krups are slightly stronger coffee than the Jura.

Less frequent cleaning demands with the Krups.

Krups comes with its own Stainless milk container so you can fill it and put back in fridge when not using. The Jura you must purchase the milk container for 8-100 dollars.

Krups has a drip tray float to remind you when it needs cleaning out.

The Krups costumer service department was very quick and responsive when I called them. Oh yeah and they were all American so I could understand them.

The Krups has a better look for a home than does the Jura in my opinion.

I like being able to see how full the bean container is on the Krups without looking down in it unlike the Jura.

My dislikes abouth the Krups are no removable bean container. So when you want to change coffee beans to another brand you must cycle them through where as the Jura you can remove the bean container and empty it out.

Cannot use preground coffee as an option where as you can on the Jura.

The Krups nozzle does not raise as high as I would like to accommodate taller cups but can if you slide the drip tray out first.

So bottom line would I recommend the Krups Espresseria machine??? Yes I defiantly would!!!

UPDATE:

Ok so I have been using it for some time now and love it more than ever!! My wife too!! When just making a good old fashioned coffee the creama is so rich and yummy. I love it. I am still experimenting with all the minor adjustments you can make to custom tailor it but so far I like the grind set on very fine for a very robust flavor but not bitter at all. I am also loving the included milk container for the milk froth. It is very nice to be able to just fill it, use it, then put back in the fridge when done. Jura makes you pay extra for there milk container so nice job Krups!! Well just wanted to give an update as to how things are going here. Thanks

We''re a 2-3 cup a day coffee household. This doesn''t include all of the weekly trips to the coffee shop while at work for more specialized drinks. Prior to getting this espresso maker we simply brewed flavored coffee at home with cheap and disposable coffee makers. We were of course overjoyed to welcome the Krups EA8250001 Espresseria Full Automatic Espresso and coffee Machine into our kitchen. Here are my thoughts;

Pros

+ All in one unit. Stores, grinds, brews and disposes of your coffee. No outside water lines needed.

+ Stainless Steel milk frothing bottle provided. Very nice!

+ Auto clean/rinse cycle. Only needs complete cleaning once every 360 cycles!

+ Modern and sleek black look. Also, very compact in size for an espresso machine.

+ Easy to use digital interface and quick set up.

+ Water proof service guide stored inside a side slot of the machine.

+ Steamer nozzle also dispenses hot water for tea/hot chocolate drinkers.

+ Extremely quick brew time. Less than 2 minutes.

+ Energy efficient and has an auto-off timer.

+ Made in France (not Taiwan or China like many products today).

+ 2 year or 6,000 cup warrantee.

+ Machine alerts you on all cleaning/replacement functions.

+ Tool provided for easy installation of the unit''s water filter. Especially useful if you have larger hands.

Cons

Incredibly expensive.

Milk frothing bottle and attachments are a bit cumbersome to use and clean.

Water filters are $18-20 each and need to be replaced every two months.

Unable to use flavored or pre-ground coffee. There''s no bypass chamber to change beans. Once your coffee is in the machine it''s in there until you use it.

Frother is rather rigid and has limited flexibility. It''s also difficult to use on a countertop, especially with larger mugs. You need to have it on the counter edge to even get a larger cup out.

Can be rather noisey, especially early in the morning. Water tank can rattle quite a bit when brewing the coffee.

Clock display doesn''t stay on when you''re not using the machine.

Water dispenser tray platform is a bit small and while the coffee nozzles do raise, it''s not really enough for larger coffee mugs.

Some crucial pieces of the machine are plastic (coffee nozzles, parts of the frother etc.). I would prefer them to be metal as the plastic feels like it could crack from the heat.

The Krups EA8250001 Espresseria Full Automatic Espresso and coffee Machine is something most people would never buy but would love to receive it as a gift. I''m sure there are many of these machines on wedding registries from couples with crossed fingers. For the price this machine should definitely be considered an investment. Spending this much on an espresso machine is difficult to justify. However, if you can afford the purchase price it definitely does what it''s supposed to. I can absolutely say that I''m the envy of all my coffee drinking coworkers and friends. I know our household will get many years of use out of it.

Buy KRUPS Espresseria Full Automatic Espresso Machine Now

This could seriously be the best thing I have ever purchased. It is expensive, but man, it is great to wake up and push 3 different buttons a total of 5 different times and have an excellent cup of cappuccino. It could not be easier. Set up is a breeze. The machine tells you when you need water or a new filter. You can see the coffee beans. There is no mess to clean up. When it is time to empty the spent grounds (about every 10-15 cups) a message comes on, you pull out a side drawer, dump it in the trash, empty and rinse the water tray and ... voila.

We bought this assuming that it would not replace our regular drip coffee maker. But we completely stopped using the coffee maker and instead have cappuccino or cafe creme every day. The automatic cappuccino foamer is really quite clever and easy to clean. We have found that you need milk fat to make a decent foam so use whole milk or add a little 1/2 n 1/2 to whatever reduced fat milk you use and it will make a good foam. It takes a few experiments to see how long you need to let the steam run to get the right amount of milk foam to mix with the strong espresso. We have finally landed on 15 seconds. The machine always comes back to whatever setting you used last, so once you get a setting you like you can pretty much just push a few buttons and your coffee is ready in less than 2 minutes from the time you power up the machine.

It pays to experiment with beans also. We use a mix of 1/2 decaf cafe Britt which is nice and dark and adds an earthy flavor, and 1/2 regular caf Lavazza Super Crema because that seemed to be a consensus good espresso bean. The Lavazza is a medium roast. So now we have the coffee we like, and cappuccinos better than any we can get in a restaurant or coffee shop (always way way too much milk). I am confident we would never use a manual machine. My hats off to people who do. If you are like me and want a great espresso, cappuccino or cafe noisette every day, you will love this machine

Read Best Reviews of KRUPS Espresseria Full Automatic Espresso Machine Here

So, I''ve had this machine for about a month now, and I''ll echo much of what others have said: it makes an awesome cup of espresso (especially if you''ve got good quality espresso roasted beans, but that goes without saying). The fully automatic nature of the machine makes it a dream to easily get a good cup of coffee, and I''m fiendishly excited that I can reduce my outlays to Starbucks.

The one "complaint" that I had about the machine was that the auto milk attachment didn''t get hot enough (i.e. it got up to around 110 degrees F), so I started nuking my coffee to get it to a good "americanized" coffee temperature. But, I found a solution: when you hit the steam button and the milks starts pouring into your cup, pinch the plastic tube so that it sputters--this will allow more steam to get into the mix, thereby heating up the milk more. The result? Milk that gets to about 140 degrees F!! Perfect stuff. Also, BTW--I''ve successfully used almond milk from the start, so if you want to go healthy and tasty, then you have a good non-dairy, non-soy option. Cheers and enjoy!

Want KRUPS Espresseria Full Automatic Espresso Machine Discount?

This is the best super automatic espresso machine out there based on my own, super-nerdy formula: "(rich flavor * ease of use) / cost." Dorky, yes, but you''re talking to someone who came up with decisionking.com and previously has used a one-touch Tassimo machine in USA, one-touch Philips machine in Spain, and a few other cheap espresso machines including the manual kind. I am a resident of Spain and a US citizen, so I appreciate a good european style "cafe con leche."

The advantages of this Krups machine are that: 1) it''s the most compact machine, 2) it''s very simple to operate 3) it has the lowest cost of the different super automatic brands (as of 10-26-2011), 4) and it can use oily beans unlike the other different brands of machines. 5) Also, it runs the longest between cleaning cycles (360 cycles) compared to the other brands. The resulting coffee is, of course, rich and smooth and full of flavor. That being said, it is important to note that coffee flavor seems to be more related to the quality/freshness of coffee beans used rather than the machine itself.

The disadvantages of this Krups machine are its high cost (relative to my cheap coffee machines before) and no bypass doser. But both of these disadvantages are minimal especially when you compare the Krups cost to the other super automatic espresso machines. On the other hand, a bypass doser is important for that quick decaf, one would want to make for late night after dinner.

Bottom line is: I''d give this device 4.5 stars since it does not have the bypass doser. But if you want an easy to use, minimal maintenance, one-touch espresso machine, that is compact and costs the least of the super automatics then I think this Krups is the machine you want to invest in.

Save 45% Off

Imperial Berkey w/ 4 Black Berkey Elements Save 4% Off

Imperial Berkey w/ 4 Black Berkey Elements
  • Storage Capacity = 4.5 Gallons
  • Height = 25.75"; Diameter = 10"
  • 4 Black Berkey Filters Purify 11 Gallons / Hour!
  • 4 Black Berkeys will filter 12,000 Gallons!
  • Made of High Grade 304 Stainless Steel

This was a great purchase. Best deal around and it arrived in perfect condition and on time. This is a great asset to our camping equipment.

Buy Imperial Berkey w/ 4 Black Berkey Elements Now

Like a lot of folks, I struggled to get the spigot installed correctly without leaks, but the folks at 9G Health Foods (the reseller), sent me a PDF diagram that was much better than the original which made it clear how to assemble it correctly.

The all stainless steel look is unobtrusive and attractive, but I do wish there was an external visual indicator of current water level.

The flow rate through four filters is great. Our city water has a strong chlorine odor coming out of the tap, but the water on the other side of the filters is awesome.

Read Best Reviews of Imperial Berkey w/ 4 Black Berkey Elements Here

This is one of the best water filters out there. The imperial works great for 7-12 people, works fine for more but you have to really stay on top of refilling it

Want Imperial Berkey w/ 4 Black Berkey Elements Discount?

This product is simple and gets the job done. It''s great to feel independent. It''s a daily thing to see people lugging up stairs Filtered Water. When there is an Easier way. Great gift for seniors to avoid paying for services or asking favors to carry there water in. Only you can Judge the taste. After a while you will be able to taste all the Other Filtered and Bottled sources and Confirm your investment Yeah or Naa. recommendations add baking soda for the best alkaline water or oxysilver to preserve from bacteria Your nonclorinated water. Do the math and research on every investment.

Culligan D-30A Level 2 Drinking Water Replacement Cartridge Save 20% Off

Culligan D-30A Level 2 Drinking Water Replacement Cartridge
  • Reduces greater than 99.95% Giardia and Cryptosporidium cysts
  • Reduces asbestos, chlorine taste and odor, and sediment
  • 0.5-micron (nominal) filtration
  • Filter life up to 12 months or 1000 gallons
  • Level 2 Extra Filtration

I''ve purchased the D40 filters in the past. They are good to reduce lead and other major contaminants in the water. However, the water flow is quite reduced due to the extra level of filtration. They only last for 4 months and the flow decreases as you use the D40.

In contrast, the D30 lasts 12 months, still has a great filtration profile, and the water flow is much faster and easier to cope with. In fact, I can hardly notice any difference between the hot water and the cold water now, compared with when I had the D40, and the cold water was annoyingly slow.

I recommend this filter over the more expensive D40 for everyday use, unless you have tested your water and found it to have lead. Then I''d use the D40 for health reasons, but not until then. There is no added benefit to the D40 in terms of water taste, or protection from microorganisms, compared with the D30.

Buy Culligan D-30A Level 2 Drinking Water Replacement Cartridge Now

Culligan Drinking Water Replacement Cartridge Carbon Block, 0.5 Micron, 1,000 Gallon Capacity #D-30

The D-30 cartridge severely restricts water flow and nowhere on the packaging does it indicate this. I had to return them to amazon for a refund. Am using the D-10''s with no noticeable reduction in water flow/pressure. Suugest that Culligan come up with some indication of water flow for each of their water filters. If water flow is not an issue for you, then the D-30''s are probably fine.

Read Best Reviews of Culligan D-30A Level 2 Drinking Water Replacement Cartridge Here

Culligan screwed this one up. The original D-30 worked perfectly with my new-ish (2009) under-sink filter housing. However, the D-30A leaks, makes a loud humming sound, and reduces the flow of water to a trickle. I cannot find ANY D-30''s anywhere, not at any of my local hardware stores, nor online. In desperation, I compared the new D-30A filter to the old D-30 filter I was replacing, and found that the hole in the top was significantly smaller in the new filter. I used a 5/32 drill bit to enlarge the hole (holding the filter upside down so plastic shavings would not fall into the filter) and installed it. Lo and behold, no more leaking, no more loud noise, and water flow is back to normal. My theory is they used a cheaper, less effective filtration material, so had to reduce the flow significantly in order to achieve the same filtration specs. This means I''m probably not getting the same level of filtration as before with the original filter, however I cannot taste the difference, and the alternative is replacing my Culligan filter with something else.

Want Culligan D-30A Level 2 Drinking Water Replacement Cartridge Discount?

This product is the most cost effective among the Culligan home water filters. It last 1 year (or 1000 gallons) and performes well.

Save 20% Off

I upgraded from the previous D-20 filter that came with the original. It worked well. When I installed this filter, it reduced water flow and caused a loud whistling as water passed through it. I removed and replaced several times to purge air, no change. I noticed that the old filter had larger holes for the water to pass through. I may have reduced the efficiency, but to achieve water flow without the noise I drilled several small holes to increase the outflow. Works fine, full flow and no noise now. Will buy D-20 next time.

Lello 1375 Ariete Cafe Prestige Coffee Maker Save 8% Off

Lello 1375 Ariete Cafe Prestige Coffee MakerI will give this five stars. Not the same five stars I would give something along the lines of a Gaggia Carezza mind you. This five stars should be taken as a rating relative to its price. If this were the same cost of the Gaggia I would probably have to give it a 3.5

I should note I prefer americanos, cappuccinos, lattes, etc over straight espresso. I bought this for a second house. If I were to be drinking a lot of straight espresso I would have bought the Gaggia.

One important detail which is not in the description is this unit will use ESE pods. The portafilter has inserts for single and double shot amounts, as do most machines. The single shot has a small ledge around it which is designed so it may be used for both single shots and ESE pods, with a pod fitting perfectly into the area created by the little ledge. This is a big advantage for those days when you are in a rush.

Construction. This thing is solid. When I ordered it I thought it would not really be steel, just chromed plastic. Well it is stainless steel. And the finish is beautiful. This has to be the most impressive looking espresso machine this side of $300. One plus of being so heavy is you don''t have to hold it down when tightening the portafilter. Something I never liked about the lighter units.

Despite the description noting a rather weak looking 950-watt heater, I was pleasantly surprised by the speed at which it warms up. This had worried me at first, but now that I have it I have discovered no reason to be disappointed. While using the steam feature to froth it has enough power to be ready to pull a shot immediately with no need to wait. And after pulling a double shot it seems like it is ready in seconds for the next shot, well before I have time to remove the portafilter and get it cleaned and reloaded.

Another impressive feature here is the warming plate on the top of the unit. Once again, as with the 950-watt rating, I was expecting a rather weak showing on the warming front. Wow, another shocker. It works! I turn the unit on in the morning and prepare my first drink. Then I leave it on. Make sure at this point you clean the portafilter and place it on the unit empty. By the time you roll around to getting your second cup, the cups on top are nicely heated and the portafilter is warmed up as well.

The drip cup and water reservoirs are quite generous. The drip cup underneath the bottom plate even has an ingenious little pop up float near the back which raises with the water level. Instead of constantly pulling up the plate, you can tell if it is getting full by simply looking to see if the float is starting to pop up. What a nifty little feature!

There is one drawback. The portafilter is what Ariete calls their "Thermocream" design. The problem with this design is it is created to produce a "crema like" crema on the top of every cup. This somewhat hides whether or not you are doing your job right and the crema is a product of a good grind, good tamp, and good pull. I prefer the crema production to be a function of how well I doing my job, not a function of some little device that makes stuff that looks like crema even if it is not.

I would like to add that the Group Head (the thing the portafilter attaches to when you put it on) is not solid metal. Parts of it are plastic. But given the price I am not willing to deduct a star for this (or the Thermocream feature) as I would if I were comparing to the $200 machines.

This is an amazing espresso machine for the money. I wanted to run it through its paces for a few months before reviewing it. After almost 3 months and over 100 double shots, I am ready. I am a straight shot drinker; I never knew how smooth and intense espresso could be until I got this machine. Crema is good. I subsequently tried a few offerings from espresso bars and found them completely disappointing; I doubt I will visit another espresso shop any time soon.

If you have problems with the machine, call Lello Appliance: 201-939-2555. The one year warranty is meaningless if you don''t know whom to call. Amazon could not provide this info. Lello is very responsive in my experience.

Steaming is adequate. My wife and guests like cappuccinos and lattes. I use a 20 oz Krups pitcher, and it works all right. It is shorter and wider than some of the others. I think a smaller pitcher might work better. I use a thermometer to keep from scorching the milk. I like to mix a drink that I found online called a "flat white". After you steam the milk, stir the froth into the hot milk in the pitcher to make a uniformly velvety thick mixture and pour this into the cup. I always like to make milk drinks in a clear glass cup. The appearance of the layering of foam, milk and coffee is impressive. I steam the milk, make the espresso in the clear cup, and then pour the foam over it. That way, the crema from the espresso, with a lot of the flavor, stays in the cup instead of sticking to the wall of the shot glass.

Experiment with how much coffee you put in the filter. Do not overfill the filter, but I find that experimenting with the amount of coffee I use has improved the quality of my espresso. The amount used can vary according to the type of coffee, roast, and grind. I use less of a darker roast, for example, to avoid a bitter flavor.

The keys to quality are 1) The coffee and roast, 2) the grind, and 3) the time spent brewing.

THE COFFEE:

I used to drink dark roasted coffees like Starbuck''s. I found that purchased dark roasted coffees taste burnt and bitter when made into espresso. A lighter roast is called for. I decided to start roasting my own green coffee. I use my long-disused hot air popcorn popper for the task. I found good instructions for roasting and a good selection of green coffees at Sweet Maria''s on-line. Their espresso blends or Timor Maubesse (Indonesian) beans roasted to Vienna roast, a shade lighter than French roast, made fine espresso with good crema. It is very easy to control how dark your roast is. You do need good ventilation.

If you do not roast your own, the beans you buy should not be the darkest roast available. The finest coffees available are arabica beans grown at high altitudes. The robusta coffees are bitterer and have much more caffeine; they make up large part of the canned coffee blends on the market. While the arabica beans are much better tasting when brewed into coffee, by themselves they do not produce as good espresso as a blend of quality arabicas with 10-15% good quality robusta added for its taste and crema producing qualities. The green espresso blends that I buy have a small percentage of robusta added. For the reviewer I read who thought that the espresso she made did not have enough of a jolt, a blend containing some robusta might take care of that problem.

THE GRIND:

A friend of mine who has made espresso for decades has never bought a fancy grinder; he uses a blade grinder and grinds very fine. I do not recommend this for this machine with its pressurized portafilter. Fine particles of an uneven or very fine grind can plug the filter; it can sometimes be hard to unplug the filter.

I bought a Capresso Infinity grinder from Amazon. For under $100, it produces a fairly consistent grind. You do not need to tamp the coffee hard in the portafilter. The quality of the brew is determined by the fineness of the grind. I experimented a bit with grind. I found a grind that occasionally plugged the filter. Set one notch coarser it produced a consistently good espresso without plugging the filter. So I think that the finest grind you can get without plugging the filter is probably best.

When experimenting with grind, be careful. One detractor who gave a poor review to this machine says that there is danger of the machine exploding. If you do not see coffee coming out of the portafilter within a few seconds of turning the dial to the right, shut off the machine and clean out the filter. Then use a slightly coarser grind.

If the machine does not deliver coffee and the pump is left on, a messy explosion seems likely. This seems like common sense to me. The fact that the detractor experienced an explosion is a testament to the amount of pressure the pump delivers.

AMOUNT OF TIME SPENT BREWING

If you do enough research on line about espresso, you will find a reference to the "Golden Rule". This rule states, as I understand it, that drawing a double shot should take 20-25 seconds. If it takes less time to draw a 2-2 1/2 ounce shot, it will be weak; if it takes longer, it will be "over-extracted" and bitter.

If you have an expensive machine with a commercial non-pressurized portafilter, the proper combination of tamp pressure and grind to get this brewing time will produce good espresso. With a pressurized portafilter on this machine, tamp is fairly unimportant. The extraction time is therefore controlled by the fineness of the grind. I have found that if I adjust the grind as explained above, it does take 20-25 second to get the shot.

Never leave the cup under the spout after shutting the pump off. After you shut off the pump, the coffee that flows from the machine is not extracted under pressure and will taste like bilge. Let the coffee extract under pressure for the full 20-25 seconds, move the cup from under the spout as you shut off the pump. The last few drips should go into the tray.

PROBLEMS

I gave it four stars only because there were enough very soluble glitches to make learning how to use the machine a bit trying. I destroyed a gasket before I realized that tightening the group head more did not prevent the first shot from being a total bust. Unless you warm up the machine for at least 10 minutes, run a blank shot through the machine, because all you will get is steam and espresso that tastes like dishwater. After destroying the gasket, I found the service number for Lello Appliance: 201-939-2555. They acknowledged that the original gaskets were not very good and sent me 2 new ones via priority mail; I got these in two days.

Another minor glitch is that not all of the water draining from the machine goes into the drip tray. Some water ends up leaking under the drip tray; but as long as the drip tray is emptied timely there will not be enough overflow to leak onto the counter.

The cup warmer is a joke. Have some hot water going near your machine to preheat cups. This is especially important when making milk drinks, which is a longer process.

It is now 4/14/2009 two years and change since I bought the machine. I use it every day for an average of 3-4 double shots per day. It still makes the best espresso I have had. Except for the leaking drip tray, it gives me no problems. Part of the quality has to do with the gourmet green coffee beans I buy from and roast at home in a hot-air popcorn popper. The rest has to do with the machine. My cousin has a Rancilio Silvio, a highly rated and expensive machine. My machine is easier to use and pulls a tastier shot.

1/23/2011 it is now four years since I bought the machine. Still working as new! I never liked the pressurized portafilter that came with the machine It is always getting plugged and is hard to clean once plugged. I discovered via a forum on coffeegeek.com that you can get a non-pressurized filter basket, La Pavoni 2 cup MP-68 Millenium Edition Europiccola/Professional non-pressurized basket, a 51mm basket that fits the portafilter fairly precisely. Remove the black "pressurizer" by removing the screw at the bottom of the filter. You have to flatten the rounded rim on the new basket. I did this by inverting the basket and carefully flattening the rounded edge using a large pin punch--a small bolt or steel rod would work--and tapping it with a hammer. You need to get a better tamper and use a finer grind. The end result is the best cup yet with real crema. You need to adjust the grind and tamp pressure to get the espresso shot to draw in 20-25 seconds. The only drawback is that the seal was not as good as with the old basket. I fixed that by smoothing the imperfections resulting from the way I flattened the rim by rubbing the inverted basket on a knife sharpening stone until it was evenly smoothed.

12/26/2012 The machine finally died in late summer. It has a leak in the pump which has gotten worse. They will not send you parts; the only option is to send the machine in for refurbishing. Probably cheaper to get a refurb. I am not altering the rating; after 5 years of use, I definitely got my $100 dollars worth. This machine with the La Pavoni portafilter made the best espresso I have ever had or, frankly, that most of my friends have had. I got a "Presso" manual expresso maker locally to use while I decide what to do. At $120, I heartily recommend this machine. After 3-4 months with the Presso, I doubt I will get another semi-automatic machine soon.

Buy Lello 1375 Ariete Cafe Prestige Coffee Maker Now

Wow, a stainless steel unit for ~ $130. Seemed too good to be true but let me assure you that it''s not. Solid and well built, it is quite functional and easy to use too. I live in Seattle, the coffee capital of the universe so I''ve got fairly discriminating taste in espresso and it has more than lived up to my expectations. The 15-bar pump-driven system provides good, strong pressure and brewing consistency. The drinks have frothy foam, excellent brew, and great taste. It is a bit bulky, roughly a 10" cube, but not overly large (it is actually 9.5" x 9.5" x 12" to be exact). Unlike some models, there''s pretty good clearance between the nozzel and the drip tray so you can get a decent-sized cup underneath. Easy to take apart and clean too. I''m very happy with this purchase!

Read Best Reviews of Lello 1375 Ariete Cafe Prestige Coffee Maker Here

ours started a leak out the back of the portafilter last week after only a week of ownership and stopped brewing at all today. I am bummed cause I followed each instruction to a T to avoid the problems all those "complainers" who wrote the "exploding and shattering glass" reviews must have brought upon themselves.... Ours is a beautiful machine that I will be sending back after the holiday as much as I don''t want to. I will choose a different machine this time and not take a replacement. The feedback is real and there for a reason.

Want Lello 1375 Ariete Cafe Prestige Coffee Maker Discount?

I''ve had this for a couple of weeks and it has produced excellent espressos with a smooth, reddish-brown crema. My husband has commented that it''s the best espresso he''s had yet--that''s saying something. Believe it or not, you cannot tell a difference from my espresso or the cafe down the street. This is a bargain for the quality you''re getting. Beautiful machine. Heavy stainless steel. Quick turn-around time for your next espresso (and next and next and next and next!) Just excellent! This machine is not designed to handle e.s.e. pods. I know some have suggested it, but you''d need an adapter. Just thought I''d let you know.

A few tips:

1. Pressurized portafilters only have ONE hole and can withstand having a varying degree of grind. However, too finely a grind with a ''gorilla'' tamp may provoke an explosion. A pressurized filter is made to do the work for you. So don''t tamp hard.

2. There is no lock handle on this portafilter--that''s only for European models. It''s no defect.

3. Simply add the grounds, tamp lightly, remove excess from around the portafilter, attach to grouphead snug, turn to "coffee cup" position (all the way to the icon, please!). STOP machine after a few seconds (8 or so), or when the coffee starts to turn from dark brown to lighter brown.

4. After pulling a shot, run a blind shot through (no grounds) to clean grouphead. Next, take a damp paper towel to wipe around the seal and ''spout'' of the grouphead. (doesn''t matter which order you do this) Done!

5. When done using steam wand, simply remove rubber tip and rinse out, wipe stainless portion of steam wand with a damp cloth, and finally, turn a little steam on to eject any milk that may remain.

6. The drip tray portion needs to be rinsed/wiped out, because when making an espresso, water comes out afterward into the drip tray from below. There is a slight protruding part on the drip tray that fits onto the bottom of the machine--the water comes out from the bottom onto the drip tray. I couldn''t figure out why I had collected so much water, because I rarely spill any . . .but realized after making an espresso what the machine ''does''. No problem.

7. Frothing: This machine makes perfect froth. You can use the rubber tip first and as you get better, you can stop using it.

Some pointers:

a. Put 1/4-1/2 of COLD milk into a frothing pitcher or cup (sorry baristas!).

b. Insert frothing arm into pitcher and hold pitcher at an ANGLE.

c. Start frothing (clicking noise normal)

d. As the foam ''grows'', keep your frothing tip just below the surface of the foam and keep pitcher at an angle. Stop when your foam is ''tight'', or when it''s doubled in size. Be careful, if your foam starts producing big bubbles, you''ve boiled your milk!

This machine produces glossy foam, just like my local cafe.

This machine is completely stainless steel inside and out. The ThermoBlock is lined with stainless, too! It''s a bargain! Get into the Ho! Ho! Ho! spirit at this price!!

12/17: I know it''s not been long, but this machine is still producing great espressos and other drinks. I have already saved a bunch of money by making them at home myself. Plus, it''s super convenient.

A note on storage: If not using for an extended period (vacationing, etc.), make sure to empty the water tank and run the machine (when still cool) just until water stops coming out. Then, prime the pump again when you''re ready to keep it in use for awhile.

Save 8% Off

Hamilton BeachStay or Go Digital Thermal Coffeemaker Save 14% Off

Hamilton BeachStay or Go Digital Thermal CoffeemakerI was given this as a gift. I found reviews for it (either the model in all black or brushed aluminum) favorable. Some people rated it negatively because they failed to read any directions and didn''t press the "PRESS TO POUR" button on the carafe. Instead they unscrewed the top off and said it spilled when pouring. RTFM You always have to look to see if bad reveiws are due to the user''s mistakes and lack of knowledge of the reviewer. They often are.

The two most negative things is...

1. When making a full pot I almost always get a lot of grinds. The problem is that the filter cup fills too quickly and the water level goes over the height of the paper filter. I''ve tried to find a taller filter, but they seem to all be the same size. Usually I either do a single mug (three 6 oz. cup servings) or the full carafe(10 servings). I can''t recall if I''ve tried 6 or 8 servings to see if grinds are an issue there.

2. the plastic travel mugs retain water between the stainless steel outer shell and the inner plastic shell. UNtil I realized what the issue was, they would dribble (dish/cleaning water not coffee) when I drank from them. I find water gets in between especially after a run in the dishwasher. To get the water out, hold them by the bottom. With them facing upside down wave the mug back and forth (like a pendulum). Do it very quickly and the water will shake out. Once I found the problem, the constant dribble from a clean cup stopped. They keep the coffee reasonably warm for a while. Especially if you run hot water in the mugs before you use them-so they don''t leech heat from the coffee to equalize.

3. the Hour/Minute buttons might be too easy hit and change the clock time. They should have a set button. I haven''t done it, but that''s the only negative.

For singles or a lone couple this is great.

I like the double spout so I can brew one mug, two mugs or a whole pot.

No need to dirty the carafe when I''m making small amounts which is 95% of the time.

The Timed brew is easy to set and works well.

I use unbleached paper cup filters. (this uses a bucket, not the cone shaped filters.)

The coffee bucket lifts out on a loop handle and is easy to dispose of grinds.

The instructions it gave on measures of coffee were good. When I used the instruction on the brand of ground coffee, the coffee tasted terrible. The coffee company said to use almost twice as much ground coffee than Hamilton Beach says.

I''ve already experimented with Torino''s sugar free vanilla syrup, and some ground cinnamon in the coffee bucket add a great cinnamon spice without the sharp taste of the grains of cinnamon floating on top of the coffee.

I''ve had the coffee maker about two years now. Despite being mostly plastic, I''ve had no breakdowns. Nothing has fallen off or cracked.

Feb 2013

Coffee maker still going strong. I rarely use the carafe, but the travel mugs are still how I make coffee every day.

We bought this to keep in our Motorhome. We had a certain department that we wanted a coffee maker for since it has a slide down cover and only a certain size would fit and this one fit perfectly. We tested it first to be sure it worked and that we would know how to pour it like the other reviewer had said, read the instructions. It even stayed warm for about 7 hours, not hot but warm. I tested the mugs that came with it and I didn''t have any dribbling, not to say we never will be when I tried it there weren''t any. I give it a thumbs up as it is what we were looking for.

Buy Hamilton BeachStay or Go Digital Thermal Coffeemaker Now

When I buy a coffee maker I expect two things. I expect the unit to heat the water sufficiently to brew exceptional coffee, and it should pour without dribble.

Regarding the former, this unit scores five stars, provided the reservoir is filled with room temperature water. The heated water travels through a plastic tube back through the reservoir on its way to the spray nozzle, so if the reservoir is filled with refridgerated water, there''s a heat transfer issue at play that decreases the temp of the heated water before it reaches the coffee grounds. With ambient temp water I''m getting about 195F; very good. With refridge water, about 180F; not bad but certainly not optimal.

Regarding dribble, I have not experienced the problems mentioned throughout these reviews; perhaps the spout has been redesigned due to complaints. And I''m no stranger to dribble; I''ve used many a Mr. Coffee machine so I''ve fought the dribble battle. So five stars from me for lack of dribble.

As for the carafe, it''s thick and it outperforms the Black and Decker I had. However, I don''t have heightened expectations on any stainless steel carafe keeping coffee piping hot more than two hours, and this unit meets my two hour mark without issue.

Finally, HB added a couple of bells and whistles to complete the product.

Programmable; always nice to have.

A "1-4 Cup" setting that adds 5-10 degrees and slows the spray to get more flavor from the grounds, but I don''t detect much of a flavor difference.

Bottom line: a solid machine and I''d purchase it again.

Read Best Reviews of Hamilton BeachStay or Go Digital Thermal Coffeemaker Here

I purchased this at Kohl''s for $69 bucks. It is awesome! I used to have a Melitta take 2 that brewed into to go mugs or into a carafe. The Hamilton Beach brews much hotter coffee. The carafe is larger and keeps it warm for a long while. I took a mug to work 2 days ago and it stayed warm on my desk about an hour longer than the melitta mugs. I like that you can use any travel mug with this unit. I have only one complaint...the mugs leak water after washing. Water gets trapped in the black rings and then leaks out. So, be sure you are dry before you head out.

Want Hamilton BeachStay or Go Digital Thermal Coffeemaker Discount?

Length:: 0:31 Mins

I think the video says it all...

Save 14% Off

Aquasana AQ-4035 Drinking Water Filter Replacement Save 1% Off

Aquasana AQ-4035 Drinking Water Filter Replacement
  • Aquasana drinking water filters remove more contaminants at the best value
  • Filters water under pressure over more than two million square feet of material
  • At only 10¢/gal. on Water for Life, Aquasana is less expensive than pitcher filters
  • Aquasana is less expensive than pitcher filters

For several years I was a very satisfied owner of the Aquasana under the counter filter system. The filters would last about five months until the water flow devolved into a trickle and needed to be replaced. At some point in 2011 Aquasana changed the filter design and the new filters clogged up after just a few weeks. I contacted the company and was told they had a problem with the glue used in the filters in one batch and they''d replace my filters for the cost of shipping. Fine. Well, the same thing happened again. Contacting the company once more I was told the filters had a new design and a pre-filter was now required. They shipped me the pre-filter. Once again, after about six weeks (and a 2nd pre-filter) water flow is virtually non-existent!

ENOUGH! I am done with Aquasana as I refuse to pay $50 every six weeks AND deal with the hassles of changing filters and pre-filters so often. What a shame. They''ve ruined what used to be an excellent system. If anyone knows of a system that actually works, please advise.

Buy Aquasana AQ-4035 Drinking Water Filter Replacement Now

These filters definitely work. However, we have to replace ours much more frequently than the suggested rate. The water stream slows significantly after about a month, and they never last two months. That adds up: The replacements are $60. Keep that in mind.

Read Best Reviews of Aquasana AQ-4035 Drinking Water Filter Replacement Here

I''ve been using this water filter system for drinking & shower purpose for last 4 yrs. Very happy with the results but the cartridge change procedure could be easier. I am bit scared to use the tools since its made of plastic. And with bare hands to loosen and after replacing cartridges tighten it again with the sharp plastic edges of the bottom of filter system(over the counter system), is quite pain. I wish they could redesign it for ease of replacing the cartridges.

Want Aquasana AQ-4035 Drinking Water Filter Replacement Discount?

Great tasting water but filters only last about 3 months. And I use only about 1 gallon a day.

Also check out the comments section of the reviewers.

aeu wrote. Anyone notice that 5 of these comments were made on or around the same day? Each has one grammatical/spelling mistake and mindless non-sequitors. Looks like a shill pumping up the rating to me.

I TOTALLY AGREE.

Save 1% Off

Live in the Caribbean and bought this filter to use as cooking water. The water here has a lot of clorine. Had the water tested and it came out perfect so I''m creating a system to hook this up to the water/icemaker of our GE refrigerator.

Breville BES860XL Barista Express Espresso Machine Save 28% Off

Breville BES860XL Barista Express Espresso Machine with GrinderI spent my Christmas 2009 reviewing expresso machines. I had just returned from a trip to Europe and finally was going to fold and get an expresso machine. I missed the expresso from Italy and France. 1oz of crema delight.

So, I liked the Breville from all the reviews but was worried about some of the negativity on the "wet puck" I had read. All the reviews mentioned excellent coffee though, so it was on my short list.

Then I saw the Breville BES860XL, also known as the Barista Express Programmable Expresso. From the looks you can tell this unit has exchanged the hot water dispenser for a bean grinder. This unit is a fully automatic expresso machine with the super automatic feature of grinding a pre-measure of beans for your brew. Note, it is not a super automatic machine as you still need to manually mount the portafilter into the group head, and clean the filter afterwards. This is as automatic as you will want to go if you want to really control your coffee.

But, let me walk you through the pleasure:

1. the box. this has excellent graphics -even as you open, the getting started guide and pictures guide you along. The unit removes easily.

2. The tamper is magnetically held in place on the front of the machine -you can use it in place or remove for manual tamping.

3. New: -there is a dry puck feature now for all the fussy reviews -this removes excess water so you get, a dry puck

an excellent burr grinder -you can dismantle this for cleaning, and it has a wide range of control

for those that previously complained about the "cheat" dual wall filters -the unit comes with single and double dual wall AND single wall filters

there is a hideaway storage tray to hold all the small goodies

4. Steaming -excellent steam temperature and pressure -works very well with the provided frothing jug, very minimal excess water to start

5. The real test. I am using the dual wall filters, and the Illy whole expresso beans I got from Italy were made into pure heavenly expresso. Nice crema. This is the real thing.

This is one finely engineered machine. From a mechanically inclined electrical engineer to the folks at Breville: you have created an exceptionally functional piece that does the job. Did I mention it is beautiful on the counter as well? I have it on an island, no bad sides.

Drawbacks: none. BUT, when making a real expresso shot, make sure you pre-warm your demitasse. Otherwise the expresso will heat up your cup and your coffee will not be hot. I run a water cycle first into my cup to heat up the group head and the cup.

In my opinion this is the best buy in the market under $1500. At the office, daily I use a super automatic machine that is at that top end.

The Barista Express is Breville''s newest (and most expensive) offering in its line of espresso machines (which includes the Breville 800ESXL Commercial Espresso Machine and the BES830XL Die-Cast Programmable Espresso Machine). It is a semi-professional machine designated for the "aspiring barista" and the "beginner."

The major selling points of the Barista Express are:

(1) patented dual-wall filters to help novices make a respectable cup of espresso without a lot of fuss. Breville has also included regular (single-walled) filters to allow a user the freedom to craft a cup of espresso like a professional barista would.

(2) the integrated burr grinder

A burr grinder (as opposed to a blade grinder) is ideally suited for grinding coffee beans because they generate less frictional heat than a conventional blade grinder. (Excessive heat degrades the quality of coffee beans. See Breville BCG450XL Conical Burr Grinder)

(3) coffeehouse-quality espresso right in your own home in under 2 minutes flat.

My experience with Breville Barista Express has been mostly positive. I''m especially impressed by how easy it is to make a delicious-tasting cup of espresso! Here''s a detailed assessment:

Single-Wall and Dual-Wall Filters

Breville has included 2 types of filter: (1) the single-wall filter and (2) the double-wall filter. Each type of filter comes in 2 sizes (single-shot and double-shot) -for a total of 4 filters.

> Single-Wall Filter (Non-Pressurized Filter)

With the single-wall filter, getting the tamp pressure and grind size just right are of paramount importance for making a good cup of espresso. Under-extraction results in a watered-down espresso with little creama (foam head). The espresso will also taste a little sour. Over-extraction, on the other hand, makes the espresso overly bitter. I''ll tell you, I have ruined many a cup of coffee because of under-extraction or over-extraction. Getting it right will take a lot of patience, practice, and experimentation.

> Dual-Wall Filter (Pressurized Filter)

I really appreciate the dual-wall filters Breville has included in the package for a beginner who is unsure of the "right" ground size or tamp pressure to use. The dual-wall filter helps to give a beginner a leg up on making a good cup of espresso without having to worry too much about the intricacies involving coffee ground size and tamp pressure.

A commonly reported problem that''s noteworthy is that the single hole on the lower wall sometimes gets clogged up (although I haven''t encountered the problem thus far). Breville advises the use of a pin to unclog the filter.

Coffee Temperature

The ideal temperature of the water for extraction is between 195 F to 202 F. However, the water temperature reaches only roughly 185 F on my machine. There are no adjustments that allow you to increase/decrease the temperature of the water.

Bean Hopper & Conical Burr Grinder

The bean hopper coffee that feeds the burr grinder has a supposed 8oz capacity. In practice, I find that it will only hold about 6 oz (it takes about half of a 12-oz bag of Peets coffee). A real plus to the hopper is the edges of its lid are lined with rubber to ensure a tight-fitting and airtight seal, so the coffee beans won''t degrade as a result of oxidation.

The grind size of the burr grinder is adjustable, from very fine (for espresso and Turkish coffee) to coarse (recommended for espresso extraction with a dual-wall filter). The grinder delivers very evenly ground coffee (no lumps).

The only complaint I have about the hopper is as it empties out, the coffee beans in it occasionally need a little help to make them fall into the chute leading to the burr grinder. This happens more often with "oily" coffee beans.

Magnetic Tamper

The magnetic tamper allows you to either (i) tamp on the counter (like a professional barista does) or (ii) do your tamping "on board" (with the tamper magnetically affixed to the machine). I really like that you''re able to store the tamper on board when it''s not in use, so it''s within easy reach and it won''t get lost.

Programmable

I like how easy it is to program the amount of espresso dispensed into both the Single Shot and Double Shot buttons. For example, to program the Double Shot button, all you do is press the Program button, press Double Shot button, and press Double Shot button again to stop the extraction once you get the desired amount of espresso. Thereon, the Double Shot button will dispense the preprogrammed amount of espresso every time you push it.

Steam Wand

The steam wand produces perfectly textured milk. You can use an included attachment if more froth is desired.

Design

The Barista Express is a beautifully designed machine that simply oozes class and quality. The exterior is stainless steel except for the water tank, the bean hopper, the drip tray, the knobs, and a few other smaller parts (all of which are made of plastic).

Easy Cleanup

Clean-up is easy:

> Give the portafilter a good tap to expel the ground. The ground should pop right out (the used ground should resemble a brownie if you''ve gotten the grind size and tamp pressure right). Give both the filter basket and the portafilter a quick rinse and you''re done.

> Empty the drip tray when it says "Empty me" (a small float atop the drip tray gets upturned to display an "Empty me" sign when the drip tray is just about full) -a very nice touch.

> Make sure the steam wand is wiped down immediately after use.

Get Started Right Away

Everything you need to get started right away is included: filter baskets, milk jug, tamper, carbon water filter, and frother attachment. You probably want to get some espresso cups and a thermometer if you don''t have them already.

---

Despite a couple of issues, I like the Barista Express. Would I recommend it? Well, it depends.

If you''re looking for an convenient, no-brainer way to make good cup of espresso (or any espresso-based beverage, such as Latte, Cappuccino, and Mocha) the Barista Express may be your ticket. It consistently churns out a good cup of espresso when you use the dual-wall filter, which works in tandem with the preprogrammed dual-wall settings. In addition, the burr grinder, which doesn''t normally come integrated in professional machines, is a definite plus.

However, if you''re into the art of making espresso (like a true barista), there are other good machines within the same price range you might want to look at first (one of the most popular machines is the Silvia Rancilio Espresso Machine).

There you have it. The above are some important considerations you might want to take into account before you make a purchase decision.

---

[Update October 5, 2011]

4 months after I acquired this espresso machine, it began leaking water. The water must have shorted out the electronics because the unit stopped working altogether shortly after. For months, my machine fell by the wayside, until I contacted Breville about getting it fixed. I was pleasantly surprised at how promptly they responded and how helpful the customer representative was. About 1 week after I contacted them, I received a brand new unit. Great job on the customer service, Breville -Thank you. You''ve definitely won me over.

Buy Breville BES860XL Barista Express Espresso Machine Now

I agree with most of the reviews below but wanted to add a few words about my experience with this machine:

I made a cursory read-through of the manual and having never owned a machine like this, but certainly having purchased a lot of coffee shop espressos across the globe, I thought I could jump right in and make some great drinks. Well, in part true, but I hit a point where I almost returned it. I started off with the double-wall filter and it made a very decent shot. Then I figured I try out the single wall filter. 2 weeks later and after joining the ranks of Corn-holio, I hit the jackpot.

During the first 2 weeks, I went from a moderate grind and a middle grind amount to the finest setting and about 2/3 away around the grind amount dial. I even far exceeded the recommended tamping pressure. The result was always an under extracted and bitter shot. Most of the time the puck was wet on top and a bit messy to clean up. Each time I pressed the double-shot button, the pressure wouldn''t even rise into the darker colored scale. No matter how fine the grind, or how hard I tamped the coffee the result was the same. I thought maybe it was the bean I chose or just a lousy grinder. Nope.

The day before yesterday I decided to read through the manual very carefully and try doing what they say step by step, not just what the cartoon correction diagram showed. I pre-heated the cup by running hot water through the filter and portafilter, thereby warming it. Then I immediately dried the portafilter/single-wall filter and filled it with freshly ground coffee. I added some coffee, pressed it down lightly into the filter with my fingers and added more. Then I tamped it with about 20 pounds of pressure. When finished, the tamper''s stainless rim near the bottom was not completely recessed in the portafilter, leaving it filled to within 1/8". After cleaning the rim thoroughly I simply attached the group head and pressed the pre-programmed double shot. Killer espresso like ones I''ve had in the finest Italian shops. Cleanup was a dream because the puck was nearly dry it just popped out. Wow. Cleaning between shots is important reheating is as well. If you follow these (Breville''s) directions you will be more than pleased with this machine. I now feel like I got my $600 worth.

I changed a few things all at once, so I can''t necessarily put my finger on exactly what changed the output. Pre-heating and filling the single-wall filter to an after-tamped level near the top seems to be the key. I love this machine now. As with the other reviews, I think the "clean me" light comes on with just a pre-set number of cycles since I too use filtered water and clean incessantly. The machine is heavy, solid and well laid out. Watch out while filling the reservoir so as not to get even a few drops close to the hopper jamming problems and a difficult clean. I don''t like leaving the tamper in the magnetic mount to tamp my coffee, but it''s a great place to store it. The wand for frothing is fantastic, but I normally prefer straight espresso. My lovely wife prefers cappuccino and we''re now working on some good cup art, no longer worrying about trying to nail the perfect shot. I do recommend this machine, but I highly recommend reading the directions word for word, front to back in the manual and adhering to their advice. Breville designed it and they know how to get the best results. With practice, you too will snub your nose at Starbucks from now on.

Best of luck.

Read Best Reviews of Breville BES860XL Barista Express Espresso Machine Here

We have had our Breville unit for several months now. It has given good, reliable service and makes a terrific shot. I take capuccino (and the steam wand frother is very easy -the best manual frother I have used), and my lovely wife takes americanos. We use the "barista" filters rather than the Senseo-style "beginner" filters. The included pressure gauge makes it very easy to "sight in" your favorite shot by varying the grind and tamp till you find what you like.

The pump assembly, heating block, and user interface are terrific. The buttons have a nice feel, everything about the machine''s style radiates solidity. It is a pleasure to use. The waste reservoir in the base is large enough for several days'' coffee drinking, and is easy and simple to empty. The convenient hidden compartment behind it is a great place to stash the extras and cleaning tablets.

The grinder is indeed adjustable and delivers consistent sized grind when it is working. But there are several problems with it -it''s obviously Breville''s first attempt. First, the bean reservoir has very shallow sides -they are not sloped enough for most beans to autofeed, so we often end up pulling the top open and stirring the beans with our fingers, to get them to feed down into the grinder. Second, the grinder *will* jam if you use oily beans -which is too bad as we like a very dark roast. Mixing oily and dry roasts 1:1 seems to be OK, except... Third, the grinder *will* jam if you get even a little bit of water in it, which is inevitable if you fill the tank in-place on the back of the device. The molding at the top of the machine seems custom designed to direct otherwise-harmless drops of water straight down into the grinder where they will do the most damage.

The worst thing about the grinder is that it is a bitch and a half to clean. You can disassemble it -at least as far as getting the stator blades out from around the burr -but the part that jams is the feed paddles that push grounds out of the area under the grinder, into the top of the chute that feeds the espresso head in its holder (as pictured). That part is nearly impossible to get to. When the grinder jams, I vacuum out the coffee beans and grounds with the blade head on our vacuum cleaner (incidentally, Dyson vacuums rock), then go after it with a combination of toothpicks, pipe cleaners, and dust-free canned "air". This generally happens in the morning, so I wake up the kids with the vacuum, and then everyone''s in a bad mood -the kids want sleep and/or breakfast, I want my coffee, and I''m rooting around with a toothpick cursing the designers.

We do run the clean cycle when the "clean me" light comes on, but I suspect it is on a fixed timer -we user reverse-osmosis water, shouldn''t have any boiler-scale issues at all.

Want Breville BES860XL Barista Express Espresso Machine Discount?

UPDATE: After 10 months of non-heavy 3-4 times a week use, I got up one morning to find water leaking from the bottom of the machine, covering my counter top. I contacted Breville''s CS; they didn''t hassle me at all. They requested my receipt and serial number (stamped on the bottom of the unit), and emailed me a link to a Breville-paid FedEx Ground shipping label. A week later I received a brand-new machine. My biggest hassle was of my own doing for not keeping the original box. They have GREAT customer service.

August 20, 2012--UPDATE #2: Two weeks ago, my warranty replacement did the same thing as my first unit (water leakage from the thermoblock''s gasket). Personally, I think it''s a manufacturing defect as I always used filtered water, descaled and cleaned my machine as it was required. IMHO, the one year warranty on these machines is lame, considering what these cost.

************************************************

I didn''t like coffee of any kind until 5 years ago when I tried a drink from Seattle''s Best. Then I was hooked. I had to clone this recipe at home; but attempting to make my own Raspberry Mocha Kiss from plain ol'' coffee brewed in my $15 Mr. Coffee proved to be a failure. Now, I''m happy to say, I truly can make my own at home, all because of this stainless steel espresso machine made by Breville.

I agree with most of the other reviewers here --this is a great machine. From the moment you cut the package sealing tape on the box, the entire experience exudes class. Even the box flaps are beautiful with a large full color picture of a cappuccino on high-gloss cardboard. The directions start on the box flaps as far as unpacking it, and there is also a full manual and smaller quick-start guides to making the espresso and cleaning the machine. All the components are packaged well and the small number of parts needed for assembly fit together perfectly. You get everything you need except the coffee beans and shot glasses.

My sister-in-law owns a local coffee shop which, of course, has commercial-grade espresso machines. She saw my Breville and was impressed with the quality build for a home-use machine.

I admit after I had it assembled and ready-to-go, I was a bit overwhelmed that a coffee novice like me would be able to make a mocha or latte. I just stood there and stared at it for 3 days before I had the nerve to plug it in. But thanks to Breville for including the double-wall filters for us beginners it wasn''t that hard. You get a total of 4 filters, dual wall for novices like me, and single wall for more experienced baristas. Single and double shot of each style.

A stainless steel pitcher is also included for steaming and frothing the milk. I used skim milk and the high steam output heated and made the milk into foam in no time at all.

My first two espresso''s did not turn out. Third time was charm for me I hadn''t tamped with enough pressure on the first two I made. If you are new at making espresso, make sure you go to Breville''s web site and watch the videos there are several that will help you with whatever trouble-shooting problem you may have.

I''m amazed at how quiet it is...even the grinder hardly makes any noise...when the machine pressurizes, it''s quiet....I have 2 cats and neither one ran to hide under the bed when I turned the power button on. The steamer is the noisiest component but it''s not annoyingly loud.

Breville''s Customer Service has been supportive and quick to respond to my questions. I had a couple questions late Sunday night so I emailed them, and by Monday morning I had a response in my Inbox.

Yes, this espresso machine is an investment. But if you visit Starbucks often, it will soon pay for itself, plus there''s the convenience factor of not having to go out for a treat.

Save 28% Off

Space-gard And Aprilaire #12 Aprilaire Humidifier Replacement Water Panel Save 85% Off

Space-gard And Aprilaire #12 Aprilaire Humidifier Replacement Water PanelHumidifier needed a new water panel to replace the mineral coated old one. This fit perfect in our model of Aprilaire humidifier.

The filter is well constructed of Aluminum metal. The water flows easily. One drawback is that if your water is hard like my well water, it will build up scales easily on the filter material. One needs to wash it with power wash on a monthly basis.

The merchant is reliable and will repeat the business with him. He delivered in a timely manner and the price was reasonable.

Buy Space-gard And Aprilaire #12 Aprilaire Humidifier Replacement Water Panel Now

I am using this for a completely different humidifier that is out of production. I have to cut it down to fit but it works well and has lasted quite a long time now.

Read Best Reviews of Space-gard And Aprilaire #12 Aprilaire Humidifier Replacement Water Panel Here

Floating Solar Fountain Pump with Filter

Floating Solar Fountain Pump with Filter for Pond, Garden, LakeIt took on water and sunk after only one month of use. Of course after it sunk it stopped working.

Purchased 3 of these last spring carelully packed then away at the beginning of fall took them out today to set up for the spring/ summer and not a single one of the three is working -also, CAUTION one had a sticker that said not to be used in ponds with fish only 1 of e 3 had this caution but all three are identical

Buy Floating Solar Fountain Pump with Filter Now

Sofcheck Total Hardness Test Strips

Sofcheck Total Hardness Test StripsWell, I wanted to be able to check how well my softener was working, and this is just the ticket. Instructions right on the container are simple, and you read the color change compared to a chart on the bottle...Easy-peasy! Although getting an EXACT reading is dicey at best, this will tell you approximately how hard or soft your water is, and that''s what I was looking for.

I bought this to convince my Mother-in-law that her water softener in her condo was working correctly. I also used it to verify my water softener was on track. So, both have been tested and both are working well. If I test each one twice a year I have enough test strips to last 12 years, 6 months. Wonder if I will still be able to find the bottle after that long?

Buy Sofcheck Total Hardness Test Strips Now

The strips seem to work as advertised, but I was alarmed by the expiration date on the product container. It was August of 2010. I ordered the strips and received them in November of 2012. The product had been rated to expire TWO YEARS AGO!

Read Best Reviews of Sofcheck Total Hardness Test Strips Here

Hold under the faucet for 1 second and then wait about 5 seconds more to confirm the color and compare it to the colors on the side of the bottle that tell you how hard the water is. Pretty simple and really fast.

Want Sofcheck Total Hardness Test Strips Discount?

I used the strips to test my indoor water softening against my outdoor, unsoftened water. The strips indicated that the softened water was properly softened and the outdoor water was very hard. The strips seem to be a good indicator of water softness.

Everpure EV9000-86 Designer Series Hot/Cold Drinking Water Faucet Save 26% Off

Everpure EV9000-86 Designer Series Hot/Cold Drinking Water Faucet, Brushed Stainless Steel
  • Sleek lead-free, dual handle design
  • Spring loaded hot shut off valve safety feature
  • Insulated heat-resistant spout
  • Aerator tip provides even, clear stream of filtered water
  • 0.5 GPM flow

I purchased one of these and installed it. Construction quality appears to be good. The arched faucet top turns easily but isn''t firm, it wobbles a little, this appears to be part of the design. The faucet tube is well insulated so it doesn''t get hot when you are running the hot water, a nice feature. My one complaint is that the faucet sputters (not a steady stream) when aerator screen is in place. This is fairly dangerous when there is 200 degree water coming out and it is spattering all over and spitting up from the edges of the outlet. I removed the aerator screen and everything works well.

Of note, the mounting hole is 1" not 1-3/8" so plan accordingly. If you didn''t the escutcheon will cover the larger hole so you can get by. The hot in tube is 6 mm and the cold in tube is 1/4", pretty standard for these systems. Mounting was easy and the seal to the counter is an o-ring so it should be good.

Buy Everpure EV9000-86 Designer Series Hot/Cold Drinking Water Faucet Now

This faucet looded great when initially installed in November 2007. I purchased the brushed stainless steel version. After about 1-2 years it started to rust and pit. Also, it has always tended to drip even after stuting off several times. Initially I thought I had a defective one so I complained to Everpure and a distributor replaced with a new one. Unfortunately the same thing heppens on the new one replacement). Another thing to note is that the handles tend to become loose and wiggle around. I have to tighten them regularly.

I still have it in use today and I put up with the dripping because I like the way it matches my other faucets in the kitchen.

Shop-vac 906-87-19 Universal Tool Adapter Save 24% Off

Shop-vac 906-87-19 Universal Tool AdapterI knew I was guessing as I could not find the exact measurements for this adapter''s capacities. I am research oriented and checked multiple websites, product listings and reviews to try to learn the sizes offered by this unit. I could not find them given anywhere so I bought this with fingers crossed.

Here are the measurements of the adapter by Shop Vac 90687. OD are 2.5" 2.0" 1.5" 1.25" and 1.0". (Most manufacturers cite the OD ((Outer diameter)) when listing a measurement).

The measurements for the inner diameter were 2.3" 1.5" 1.25" 1.0" and .75". By the way, the overall length before you cut it down at all is 6.75". I cut off the last 2 smaller sections and the length was reduced to 4.35". Either length may not work for your needs if space is tight.

Ultimately this unit did not work out for my application. Now that you have the measurements posted, I hope this helps some of you as it is going to work if your requirements align. I will keep mine since I cut it to measure and hope to use it on something in the future.

I have used a couple of these devices to connect the dust port on tools to vacume hose. Funny how there are standard sizes of dust collection and vacume hoses, but every tool seems to have a dust collection port that is in some odd size. Nothing fits. This adaptor gets in between the odd sizes of tools and standard size of hose. You can easily trim this adaptor to fit either an inside diameter or outside diameter of the adaptor. Like I have said before, it does what it says it will do.

Buy Shop-vac 906-87-19 Universal Tool Adapter Now

I''ve tried several step adaptors, but this Shop-Vac 9068700 universal tool adapter has worked most often. I''m now back to purchase two or three more.

This adaptor fits over (or replaces) a 2 1/2-inch exhaust port and can be cut, stretched, or clamped to fit nearly any vacuum cleaner hose between 5/8-inch to just over 2-inches. The rubber-like material can be stretched (occasionally with some effort) to fit tight connections. I''ve even fit this over exhaust ports the same size. Soap with a little water (and rubber gloves to improve grip) can help with really tight connections. Loose connections can be secured wih hose clamps. Hoses can fit either inside and over the various incremental sections. Unused sections can be cut away with a razor knife (box cutter, etc) or power tool (bandsaw, etc).

In one application, I replaced a bolt-on exhaust port with this adaptor (that''s what the four screw holes are for) and then cut the oppposite end to fit my vacuum hose. With other applications, the large ends were simply slipped over existing exhaust ports, with the opposite ends again cut to fit my vacuum hose. Finally, several were used to add exhaust ports to home-built projects (downdraft table, etc).

This adapter may not impress others or attract girlfriends, but it often does wonders with vacuum cleaner hose connections.

Read Best Reviews of Shop-vac 906-87-19 Universal Tool Adapter Here

THIS IS THE BEST, AND PROBABLY THE ONLY TOOL ADAPTOR OUT THERE. I HAVE A SHOP VAC THAT HAS 2 DIFFERENT SIZED HOSES THAT DID NOT FIT THE EXHAUST ON MY SANDER, THE COMPANY DID NOT MAKE AN ADAPTOR TO REMEDY THIS PROBLEM, SO I FOUND THE ADAPTOR AT MY LOCAL HARDWARE STORE, CUT IT TO FIT THE SANDER, AND PLACED IT ON MY SHOP VAC HOSE. THE HOSE NOW STAYS ON THE SANDER FOR ALL DIFFERENT TYPES/HEIGHTS OF SANDING. THIS TOOL SOLVED A MAJOR PROBLEM OF KEEPING THE DUST IN MY WORK AREA DOWN. THIS ADAPTOR IS A MUST FOR EVERY OWNER OF A SANDER, ROUTER, PLANER, OR ANY OTHER PORTABLE POWER TOOL THAT GENERATES SOME TYPE OF DUST.

Want Shop-vac 906-87-19 Universal Tool Adapter Discount?

FYI this will not work with Ryobi tablesaws which have an exit tube exactly the same diameter as the large end.

This should be called the nearly universal vacuum adapter

A plea: Ryobi, ridgid, husky and anyone else making tools and shop vacs. Please make a frickin standard size and include relevant adapters with your tools, particularly a male to male and female to female. I''m tired of running back and forth to buy adapters all the time and then having to make my own with plumbing parts, string, jello and duct tape.

Save 24% Off

Chemex Coffee Maker 8 Cup Classic

Chemex Coffee Maker 8 Cup ClassicUsing a Chemex requires water to be heated in a tea kettle prior to brewing, and it requires a finer ground than what auto-drip machines ask for. After the water is brought to a boil, it''s important to wait for it to cool just slightly (about 30 seconds) and then you need to wet the grounds in the filter, wait for them to drain, and then fill the pot with water. Want more than a single cup of coffee? You wait for your first pour to brew, and then fill the filter again.

Some advantages over other forms of coffee brewing:

1. Taste: I don''t know how it does it, but the filter does keep your coffee from being bitter.

2. Cleanability: Users can keep all necessary components clean (anyone who''s brewed water and vinegar through their coffee maker to kill off a bitter taste that wasn''t there when you bought it understands this plight). Oftentimes, the most aggressive criticism of the Chemex is its ponderousness to clean because it''s not possible to get your hand into the reservoir. Some people prefer to add hot water and soap and give it a good rinse, which is fine if you clean the moment you empty the pot, but if you''re like me and you let the remaining sip or two sit until a nice coffee stain is on the glass, then you need some good ''ol fashion friction to get it clean. The best thing I''ve found: a baby bottle cleaner. It''s narrow enough to get into the reservoir and the angle can be adjusted to scrap the walls, too. Brilliant!

3. Electricity Free: As long as you can boil water, you can have coffee.

4. Mud/Sludge: French press and stove-top espresso-style brewing always leaves a thick slime at the bottom of an otherwise rich cup of coffee. Don''t get me wrong: I think that''s good (I use a French Press when I''m in the mood), but the cone on a Chemex doesn''t allow that at all.

5. Style/Size: the Chemex coffee pot is a relic (designed in the 40s) and the wood cuff with rawhide tie screams simplicity and elegance and it''s a wonderful, minimalist sight on any kitchen counter (and unlike electric coffee makers, easy to move if you need the space).

Some drawbacks any purchaser should consider:

1. Time: it does take 5 10 minutes of labor to get the morning cup of coffee.

2. Cones: you can''t run over to Wal-Mart when you use the last filter; you need to find a specialty store or go online, which means you need to plan ahead.

3. Cold Coffee: no electric hot plate (thank god) means coffee not poured and consumed immediately gets cold quickly. You can buy a wire guard and a glass lid so your Chemex can be warmed on the stovetop. I think that''s more labor added to an already laborious endeavor. Just have a warmed thermos ready and use that to store any unused coffee.

4. Learning Curve: It does take some time to get the grind right, the amount right and the water level right to find a cup which caters to your tongue.

5. Cleanability: I know this is in the advantages column, as well, but it''s worth mentioning that a lot of people hate cleaning these things. To submerge it does mean pulling off the wood cuff (which is a small pain) else it will get nasty over time.

Sometime between my apartment in college and the first move to my first real pad, my 4-cup Krups automatic drip gave out. I didn''t drink enough coffee to buy a replacement. Every so often when the caffeine urge strikes, I would microwave some water in a Pyrex measuring cup, insert a paper filter in the plastic basket that sits atop the carafe, add the ground, and pour in the boiling water all at once. Call it the poor man''s coffee maker but it made the best coffee bar none. There is no auto-drip that can extract as much strength and flavor as a quick 3-minute submersion in boiling water. Which, incidentally, is what a French press does, but leaves a bottom layer of silt.

I continue to make coffee this way, and never bought a replacement auto-drip, partly because I was lazy, didn''t have a lot of space, and it worked. Alas, the carafe went to Krups heaven as well, and I cast about to buy an auto-drip. It seems time.

I did a lot of consumer research for machines from budget-friendly $35 models to $150 multi-function behemoth that would roast, grind and brew AND bring you coffee in bed. All roads lead to Rome and all coffee pilgrims eventually come to Chemex. This is the way to get great coffee, and it doesn''t involved a plug.

I bought it because it''s simple, has no moving or electrical part, is not prone to breakage unless I drop it, does not take up a lot of space, and oh, the MOMA considers it an objet d''art, if the art geek in you needs persuation. The design is quite clever, BTW. You insert the filter, which is flushed with the side of the opening; this creates a suction vacuum, of sorts. Water drips down, and the flow is regulated by the displacement of air from below, up the pour spout, which is not flushed with the filter. To clean, you just rinse and pour out. The wooden and leather "belt" can be removed if you want to wash your carafe in the dish washer.

I use a normal #2 coffee filter, it is a bit small but I''m told the #3 filter (harder to find) fits it perfectly. You don''t need to buy the Chemex filter, but I''ve read that it is thicker, allowing for a longer saturation time therefore extracting more flavor. The carafe is heat-resistant pyrex glass, you cannot put this directly on heating elements. It will not keep your coffee warm. I make my coffee and immediately pour into my thermos. This is (still) the best way to make a cup of coffee.

And now for the reason why I have to subtract one star from such a fine product which I use, and like: THIS IS NOT AN 8-CUP CARAFE!

When it arrived I looked at the size of the box and thought the shipper made a mistake. But there it was, printed on the side of the carton: 8-cup capacity. I''m thinking "cup" as in "measuring cup", the normal kitchen unit for volume measurement. You may read "based on 5oz. cups" elsewhere, but what is that? I have trouble envisioning 5 oz. but I can estimate a cup. Incidentally my coffee cup holds a little less than one standard measuring cup.

I measured the capacity of the carafe. It will only hold barely 8 cups if you fill it to the rim, an impossibility as you need the top to situate your filter and ground. At the midpoint of the carafe, it holds a little more than 4 standard measuring cups. Even this is pushing it, as you need room for the drip. For practical purpose, this is a 4-cup carafe.

Chemex makes a 10-cup carafe, but I suspect it may be just 5-cup, practically speaking. The capacity labeling is inaccurate and just silly.

Buy Chemex Coffee Maker 8 Cup Classic Now

Simple. Elegant. and produces (almost) the best cup of coffee (second only to a Hario Syphon). The labor is negligible if you consider the benefits.

Since the filter is cone shaped, it eliminates sludge and provides a consistent filtration. I have used a Chemex since 1989 yes, I have cracked a few, but some vendors have the hand-blown version which is a sturdier glass.

Read Best Reviews of Chemex Coffee Maker 8 Cup Classic Here

Using a Chemex requires water to be heated in a tea kettle prior to brewing, and it requires a finer ground than what auto-drip machines ask for. After the water is brought to a boil, it''s important to wait for it to cool just slightly (about 30 seconds) and then you need to wet the grounds in the filter, wait for them to drain, and then fill the pot with water. Want more than a single cup of coffee? You wait for your first pour to brew, and then fill the filter again.

Some advantages over other forms of coffee brewing:

1. Taste: I don''t know how it does it, but the filter does keep your coffee from being bitter.

2. Cleanability: Users can keep all necessary components clean (anyone who''s brewed water and vinegar through their coffee maker to kill off a bitter taste that wasn''t there when you bought it understands this plight). Oftentimes, the most aggressive criticism of the Chemex is its ponderousness to clean because it''s not possible to get your hand into the reservoir. Some people prefer to add hot water and soap and give it a good rinse, which is fine if you clean the moment you empty the pot, but if you''re like me and you let the remaining sip or two sit until a nice coffee stain is on the glass, then you need some good ''ol fashion friction to get it clean. The best thing I''ve found: a baby bottle cleaner. It''s narrow enough to get into the reservoir and the angle can be adjusted to scrap the walls, too. Brilliant!

3. Electricity Free: As long as you can boil water, you can have coffee.

4. Mud/Sludge: French press and stove-top espresso-style brewing always leaves a thick slime at the bottom of an otherwise rich cup of coffee. Don''t get me wrong: I think that''s good (I use a French Press when I''m in the mood), but the cone on a Chemex doesn''t allow that at all.

5. Style/Size: the Chemex coffee pot is a relic (designed in the 40s) and the wood cuff with rawhide tie screams simplicity and elegance and it''s a wonderful, minimalist sight on any kitchen counter (and unlike electric coffee makers, easy to move if you need the space).

Some drawbacks any purchaser should consider:

1. Time: it does take 5 10 minutes of labor to get the morning cup of coffee.

2. Cones: you can''t run over to Wal-Mart when you use the last filter; you need to find a specialty store or go online, which means you need to plan ahead.

3. Cold Coffee: no electric hot plate (thank god) means coffee not poured and consumed immediately gets cold quickly. You can buy a wire guard and a glass lid so your Chemex can be warmed on the stovetop. I think that''s more labor added to an already laborious endeavor. Just have a warmed thermos ready and use that to store any unused coffee.

4. Learning Curve: It does take some time to get the grind right, the amount right and the water level right to find a cup which caters to your tongue.

5. Cleanability: I know this is in the advantages column, as well, but it''s worth mentioning that a lot of people hate cleaning these things. To submerge it does mean pulling off the wood cuff (which is a small pain) else it will get nasty over time.

Want Chemex Coffee Maker 8 Cup Classic Discount?

I have used many types of coffee makers over the years, and I keep coming back to Chemex type coffee makers. Some call it work, I call it the extra bit of user involvement that results in a higher quality end product. If you take coffee seriously--I assume you do if you reading this--the small amount of involvement required by this type of coffee brewer is simply the cost of prefection. I recommend that anyone using this type of coffee maker also invest in a one liter vacuum flask to pour your brewed coffee into so that it will stay warm and fresh. You doubtless realize that it is a bad practice to attempt to keep brewed coffee warm by adding heat as on a stove top. The result of adding heat is bitterness and ruined coffee. So, get one of these simple, well made devices, keep it clean, learn how to use it well, and enjoy really first rate coffee for years, never again having to throw away a junky plastic coffee maker. You will be glad you did.

Joe Stephenson