Sunterra 104506 Table Top Fountain Pump 30 GPH Save 31% Off

I have a small bowl and this fountain pump is small enough to fit in and generates the strong bubbling sound effect, I am very satisified with the result. Sometimes the pump with larger water volume creates louder pumping machinary noise than the bubble water sound itself. This little pump is quiet, the water bubbling sound is musical as it should be. The only ''improvement'' I can think of will be the tight curly electrical cable, I used plenty of little rocks and pebbles to stablized the little pump to stay at the center of the bowl.

My pump on my small desk fountain stopped working. I have one of those fountains that is maybe 1/2 to 3/4 foot tall, roundish, has 2 layers stacked up in the middle, supported by plastic, with large rocks around the base and middle and top levels. Pump goes in the bottom middle and shoots to the underside of the top layer if that makes sense (i.e. the water doesn''t shoot up and out of the fountain, it hits the top plastic then flows over the edges in a nice waterfall formation). Anyway this pump worked just fine for that purpose. I had to turn the level down a bit it was a bit too powerful at first there is a "volume" switch for about 3 or 4 different levels of how high it will pump. Also, it made quite a bit of noise at first, so I let it run for an hour or so and the noise cleared right up and now it runs quietly and smoothly. I do agree the cord is quite thick compared to the pump, so I used rocks to wedge it into place. So for my purposes, I have a working fountain again.

Buy Sunterra 104506 Table Top Fountain Pump 30 GPH Now

I''ve been running this pump constantly in a table top fountain for over a year and it has worked perfectly. It''s very quiet, the quietest and smoothest pump I''ve ever found. No loud noises, no strong vibration. The cord is heavy duty and well insulated, which is a good thing. Even when the fountain is barely burbling, I can''t hear the pump at all 10 feet away.

I made a makeshift pump housing from a hydroponic/vanda orchid plant pot (basically a hard plastic mesh pot) to stabilize the pump, hold it off the bottom of the fountain, and support the fountain components. The pump not touching the bowl makes a quiet pump even quieter.

I would''ve preferred a pump that moves only 10 or 15 GPH, because my fountain''s bowl is only 13 inches across, and this one is too strong. I managed to deflect some of the water column by how I designed the fountain. The pump''s water flow can be reduced with the slider thingie, but that increases the vibration noise slightly and potentially shortens the life of the pump by forcing it to work harder to push water through a narrower opening.

Read Best Reviews of Sunterra 104506 Table Top Fountain Pump 30 GPH Here

I have a litlle fountain at home and i had to replace the old fountain pump. This Sunterra 104506 table top Fountain pump works very good inside under water, it doesn''t have any noise. You only hear the water running. it is on 24 hours/day.

Want Sunterra 104506 Table Top Fountain Pump 30 GPH Discount?

I purchased this product to replace my broken pump from my Drinkwell Platinum Pet Fountain. Someone else had said that it would work and it was half the price. I figured with the easy return policy on Amazon Prime items I would try it. I just got it today and it was awesome. It is a perfect replacement. The picture of the product shows the tube sticking up but it is not attached when you get it. It is a removable piece. I didn''t attach it and the male part of the fountain fit perfectly in the pump and it is working great. So glad I bought this and not the $20 replacement pump from the vendor. Plus with Prime I got it in 2 days.

Save 31% Off