Pentek 158116 1/4" #10 Slim Line Clear Filter Housing

• Slim filter housing for low-flow applications with space restrictions
• Clear styrene-acrylonitrile (SAN) for on-site viewing of flow and cartridge condition
• Holds a 10" x 2-1/2" sediment or carbon filter cartridge (sold separately)
• Pressure relief button for easier cartridge replacement
• Initial pressure drop of 2 psi at a flow rate of 3 gpm

Dropped from 2ft while full of water, no visible damage or even scratches. Very well built filter and housing.

The threads are perfect size and fit the watts fittings I purchased with a standard 3 wraps of Ptfe tape.

Buy Pentek 158116 1/4" #10 Slim Line Clear Filter Housing Now

I needed these to replace the housings in an old RO setup. Happily, these are standard 10" filter housings with standard screw/mounting holes. They fit perfect! They are also one of the rare housings that don''t have the bleed button which I didn''t want because the bleed button interferes with most multi-ganged mounting brackets.

My deduction of 1 star is because I feel the threads are a bit big. I had to use a ridiculous amount of pipe tape to ensure a good seal. Also, I would prefer an opaque housing to reduce mold/algae build-up from the light.

Very good quality, though. I think Pentair is the new owner of Pentek, Ametek, and others. My original R.O. was a Watts from over 10 years ago.